Discrete nano-aggregates of a poly(ethylene oxide)-b-polybutadiene diblock copolymer (PEO-b-PB) were obtained by self-assembling of the copolymer in a selective solvent of PB followed by the shell cross-linking.The av...Discrete nano-aggregates of a poly(ethylene oxide)-b-polybutadiene diblock copolymer (PEO-b-PB) were obtained by self-assembling of the copolymer in a selective solvent of PB followed by the shell cross-linking.The average behaviors of the PEO crystallization and melting confined within the nano-structured aggregates were studied by differential scanning calorimetry experiments.The experiments demonstrated that the confinement effect arisen from the shells could be tuned by adjusting the degree of PB cross-linking.For the deeply cross-linked sample,the individual particles only crystallized at very low crystallization temperature (T c),wherein the homogenous primary nucleation determined the crystallization rate.For the lightly cross-linked sample,the confinement effect is T c dependent.When T c exceeded 42℃,the lightly cross-linked sample possessed a higher melting temperature and a lower crystallinity compared with the pure PEO-b-PB.展开更多
Nonisothermal crystallization behavior of poly(butylene adipate-co-terephthalate)(PBAT) synthesized via direct esterification and polycondensation reactions was investigated by the differential scanning calorimetry(DS...Nonisothermal crystallization behavior of poly(butylene adipate-co-terephthalate)(PBAT) synthesized via direct esterification and polycondensation reactions was investigated by the differential scanning calorimetry(DSC).The Avrami equation modified by Jeziorny and the Z.S.Mo equation were employed to describe the non-isothermal crystallization kinetics of copolyester samples.The test results showed that the Avrami equation was successful in describing nonisothermal crystallization process of PBAT copolyesters.PBAT copolyester could give birth to secondary crystallization.The crystallization parameter(Zc) increased with an increasing cooling rate and the Avrami exponent(n) was around 2.3.For a given cooling rate,the value of Zc demonstrated a sagging trend with an increase in adipic acid(AA) content.The equation proposed by Z.S.Mo was successful in describing the nonisothermal crystallization kinetics of PBAT copolyesters.展开更多
A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morpho...A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.展开更多
In this work the statistical mechanical equation of state was developed for volumetric properties of crystalline and amorphous polymer blends.The Ihm-Song-Mason equations of state(ISMEOS) based on temperature and dens...In this work the statistical mechanical equation of state was developed for volumetric properties of crystalline and amorphous polymer blends.The Ihm-Song-Mason equations of state(ISMEOS) based on temperature and density at melting point(T_m and ρ_m) as scaling constants were developed for crystalline polymers such as poly(propylene glycol) + poly(ethylene glycol)-200(PPG + PEG-200),poly(ethylene glycol) methyl ether-300(PEGME-350) + PEG-200 and PEGME-350 + PEG-600.Furthermore,for amorphous polymer blends containing poly(2,6-dimethyl-1,4-phenylene oxide)(PPO) + polystyrene(PS) and PS + poly(vinylmethylether)(PVME),the density and surface tension at glass transition(ρ_g and γ_g) were used for estimation of second Virial coefficient.The calculation of second Virial coefficients(B_2),effective van der Waals co-volume(b) and correction factor(α) was required for judgment about applicability of this model.The obtained results by ISMEOS for crystalline and amorphous polymer blends were in good agreement with the experimental data with absolute average deviations of 0.84%and 1.04%,respectively.展开更多
Binary alloy samples consisting of poly（phenylene sulfide） （PPS）/poly（ethylene terephthalate-co-cyclohexane 1,4-dimethanol terephthalate） （PETG） blend were prepared by the melt blending technology using a twin...Binary alloy samples consisting of poly（phenylene sulfide） （PPS）/poly（ethylene terephthalate-co-cyclohexane 1,4-dimethanol terephthalate） （PETG） blend were prepared by the melt blending technology using a twin-screw extruder. The nonisothermal crystallization kinetics of binary alloys made of poly（phenylene sulfide） （PPS） and poly（ethyleneco-cyclohexane 1,4-dimethanol terephthalate） （PETG） was studied by the differential scanning calorimetry （DSC） at different cooling rates. The test results revealed that the addition of PETG could shift the crystallization temperature of PPS toward the high-temperature direction. The nonisothermal crystallization kinetic parameters of the PPS/PETG alloy samples were calculated by the methods proposed by Avrami and Mo. Test results demonstrated that the PPS/PETG alloy could give birth to apparent secondary crystallization. The value of Avrami exponent was lower relatively, while Mo＇s method was more suited to the nonisothermal crystallization process of the PPS/PETG alloy.展开更多
Polypropylene(PP)with different contents of the second generation hyperbranched polyester(HBP)is prepared by melt blending method.The non-isothermal crystallization kinetics of PP and PP/HBP blends is investigated und...Polypropylene(PP)with different contents of the second generation hyperbranched polyester(HBP)is prepared by melt blending method.The non-isothermal crystallization kinetics of PP and PP/HBP blends is investigated under differential scanning calorimetry(DSC).The Mo equation is used to analyze the DSC data.The results show that the Mo theory is suitable for crystallization kinetics of the blends.Fast cooling rate is not good for crystallizing and nucleating.The values of half crystallization time(t1/2),crystallization enthalpy(ΔHc)and temperature range(ΔT)of PP/HBP blends decrease when HBP is added.The required cooling rate of PP is higher than that of PP/HBP blends in order to reach the same relative crystallinity.Crystallization rate increases with the addition of HBP.The crystallization rate reaches a maximum when the content of HBP is 5%.In addition,the activation energies of PP and PP/HBP blends are calculated by Kissinger equation,revealing that the content of HBP has a little effect on the crystallization activation energy.展开更多
Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/...Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.展开更多
A novel chain complex was synthesized and its crystal structure has been deter- mined by X-ray diffraction technique. It was found that the local coordination geometry around Cu(Ⅱ) is a distorted tetrahedron and C14H...A novel chain complex was synthesized and its crystal structure has been deter- mined by X-ray diffraction technique. It was found that the local coordination geometry around Cu(Ⅱ) is a distorted tetrahedron and C14H9CuNO3CH3OH is bridged by the carboxylate oxygen atom to form an infinite one-dimensional linear chain. The hydrogen bond exists between O(1) and solvate molecule O(4). The crystal belongs to monoclinic, space group P21 with a = 9.6650(19), b = 7.1280(14), c = 9.925(2) ? b = 98.39(3)? V = 676.4(2) 3, Z = 2, F(000) = 342 and m(MoK? = 1.629 mm-1 .展开更多
A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic...A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.展开更多
A significant enhancement in isothermal crystallization kinetics of biodegradable polylactide(PLA) in its immiscible blends can be accomplished through blending it with a comb-like copolymer. PLA was blended with poly...A significant enhancement in isothermal crystallization kinetics of biodegradable polylactide(PLA) in its immiscible blends can be accomplished through blending it with a comb-like copolymer. PLA was blended with poly(ethylene glycol) methyl ether acrylate(PEGA) and poly[poly(ethylene glycol) methyl ether acrylate](PPEGA, a comb-like copolymer), respectively. The results measured from phase contrast optical microscopy(PCOM) and differential scanning calorimetry(DSC) indicate that PLA and PEGA components are miscible, whereas PLA and PPEGA components are immiscible. The study of crystallization kinetics for PLA/PEGA and PLA/PPEGA blends by means of polarized optical microscopy(POM) and DSC indicates that both PEGA and PPEGA significantly increase the PLA spherulitic growth rates, G, although PLA/PPEGA blends are immiscible and the glass transition temperatures of PLA only have slight decreases. PPEGA component enhances nucleation for PLA crystallization as compared with PEGA component owing to the heterogeneous nucleation effect of PPEGA at the low composition of 20 wt%, while PLA crystallization-induced phase separation for PLA/PEGA blend might cause further nucleation at the high composition of 50 wt%. DSC measurement further demonstrates that isothermal crystallization kinetics can be relatively more enhanced for PLA/PPEGA blends than for PLA/PEGA blends. The "abnormal" enhancement in G for PLA in its immiscible blends can be explained by local interfacial interactions through the densely grafted PEGA side chains in the comb-like PPEGA, even though the whole blend system(PLA/PPEGA blends) represents an immiscible one.展开更多
Impact polypropylene copolymer (IPC), named polypropylene catalloy, not only possesses excellent impact property, but also presents good rigidity. Its superior performances result from the complicated composition and ...Impact polypropylene copolymer (IPC), named polypropylene catalloy, not only possesses excellent impact property, but also presents good rigidity. Its superior performances result from the complicated composition and microstructure. In the present article, recent progress in the studies on microstructure, morphology, crystallization and rheological behavior of IPC is summarized, and findings of the authors and their collaborators are reported. In general, IPC is divided into three components, i.e., ethylene-propylene random copolymer (EPR), a series of different segment lengths ethylene-propylene copolymer (EbP) and propylene homopolymer. The reasonable macromolecular structures of EbP and a multilayered core-shell model of dispersed phase structure in IPC were proposed, in which the dispersed phase consists of an outer EbP shell, an inner EPR layer and an EbP core. It is found that the annealing at melt-state may lead to an abnormal phase inversion, and the phase inversion disappears when temperature cools down to room temperature. The cause of phase inversion is ascribed to the existence of EbP component, which results in the stronger activity of the dispersed phase. The crystalline structure and morphologic results confirm the formation of β-iPP in IPC. Furthermore, it is found that the ethylene content in IPC and cooling rate of the samples have an important influence on the formation of β-iPP. Based on the crystallization kinetics analyzed by Lauritzen-Hoffman theory, crystallization behavior of different IPC samples is discussed and it is proposed that the dilution effect of ethylene propylene copolymer has a more remarkable influence on surface nucleation than on crystal growth. In addition, annealing at high temperature can result in the changes of chain structure for IPC, and this instability is ascribed to the oxidative degradation and crosslink reaction mainly in iPP component.展开更多
This paper reports a new donor-acceptor copolymer semiconductor, PTBTh, comprising bithiophene and bithiazole where the regular coplanar structure and the intramolecular charge transfer are expected to increase the op...This paper reports a new donor-acceptor copolymer semiconductor, PTBTh, comprising bithiophene and bithiazole where the regular coplanar structure and the intramolecular charge transfer are expected to increase the opportunity for --- stacking and charge transport. The AFM image shows lamellar stacking of the polymer on the surface. The field-effect transistor (FET) properties of PTBTh have been evaluated by a bottom-contact/bottom-gate TFT configuration. The device showed a high hole mobility of 1.14×10-2 cm2 V-1 s-1 and a current on/off ratio of 3×105 with the polymer thin film annealed at a mild temperature of 120 ℃ when measured under ambient conditions.展开更多
An ordered nanostructure formed by epitaxial crystallization of a semicrystalline block copolymer on a substrate has been used as a patterned template for the selective deposition of thermally evaporated gold nanopart...An ordered nanostructure formed by epitaxial crystallization of a semicrystalline block copolymer on a substrate has been used as a patterned template for the selective deposition of thermally evaporated gold nanoparticles, resulting in the formation of structure-guiding host nanocomposites in which the ordered distribution of the guest particles is guided by the ordering of the host nanostructured block copolymer matrix. This opens new perspectives in the field of polymeric composites related to the maximum enhancement of effective physical properties and to the numerous possible applications that arise due to the presence of long-range order in the spatial distribution of functional nanoparticles.展开更多
Stereoselective interaction was observed in the mixture of enantiopure gradient polycarbonate(denoted as PCOPC-g-PCPC, originated from the enantioselective terpolymerization of CO2, 3,4-epoxytetrahydrofuran(COPO) and ...Stereoselective interaction was observed in the mixture of enantiopure gradient polycarbonate(denoted as PCOPC-g-PCPC, originated from the enantioselective terpolymerization of CO2, 3,4-epoxytetrahydrofuran(COPO) and cyclopentene oxide(CPO)) and various isotactic polycarbonates with opposite configuration in chloroform solution. The resultant crystalline stereocomplexes exhibit enhanced thermal stability and new crystalline behaviors, significantly distinct from their parent polymers. It was found that the cocrystallization selectively occurred between(R)-PCOPC(CO_2/COPO copolymer) and(S)-PCOPC-enriched segment in the gradient terpolymer(S)-PCOPC-g-PCPC, while(R)-PCPC(CO_2/CPO copolymer) selectively complexed with(S)-PCPC-enriched segment. No stereocomplexation was observed between(S)-PCOPC-g-PCPC and(S)-PCOPC or(S)-PCPC. This study is beneficial to finding new routes to prepare various semicrystalline materials having a wide variety of physical properties and degradability.展开更多
文摘Discrete nano-aggregates of a poly(ethylene oxide)-b-polybutadiene diblock copolymer (PEO-b-PB) were obtained by self-assembling of the copolymer in a selective solvent of PB followed by the shell cross-linking.The average behaviors of the PEO crystallization and melting confined within the nano-structured aggregates were studied by differential scanning calorimetry experiments.The experiments demonstrated that the confinement effect arisen from the shells could be tuned by adjusting the degree of PB cross-linking.For the deeply cross-linked sample,the individual particles only crystallized at very low crystallization temperature (T c),wherein the homogenous primary nucleation determined the crystallization rate.For the lightly cross-linked sample,the confinement effect is T c dependent.When T c exceeded 42℃,the lightly cross-linked sample possessed a higher melting temperature and a lower crystallinity compared with the pure PEO-b-PB.
文摘Nonisothermal crystallization behavior of poly(butylene adipate-co-terephthalate)(PBAT) synthesized via direct esterification and polycondensation reactions was investigated by the differential scanning calorimetry(DSC).The Avrami equation modified by Jeziorny and the Z.S.Mo equation were employed to describe the non-isothermal crystallization kinetics of copolyester samples.The test results showed that the Avrami equation was successful in describing nonisothermal crystallization process of PBAT copolyesters.PBAT copolyester could give birth to secondary crystallization.The crystallization parameter(Zc) increased with an increasing cooling rate and the Avrami exponent(n) was around 2.3.For a given cooling rate,the value of Zc demonstrated a sagging trend with an increase in adipic acid(AA) content.The equation proposed by Z.S.Mo was successful in describing the nonisothermal crystallization kinetics of PBAT copolyesters.
文摘A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.
文摘In this work the statistical mechanical equation of state was developed for volumetric properties of crystalline and amorphous polymer blends.The Ihm-Song-Mason equations of state(ISMEOS) based on temperature and density at melting point(T_m and ρ_m) as scaling constants were developed for crystalline polymers such as poly(propylene glycol) + poly(ethylene glycol)-200(PPG + PEG-200),poly(ethylene glycol) methyl ether-300(PEGME-350) + PEG-200 and PEGME-350 + PEG-600.Furthermore,for amorphous polymer blends containing poly(2,6-dimethyl-1,4-phenylene oxide)(PPO) + polystyrene(PS) and PS + poly(vinylmethylether)(PVME),the density and surface tension at glass transition(ρ_g and γ_g) were used for estimation of second Virial coefficient.The calculation of second Virial coefficients(B_2),effective van der Waals co-volume(b) and correction factor(α) was required for judgment about applicability of this model.The obtained results by ISMEOS for crystalline and amorphous polymer blends were in good agreement with the experimental data with absolute average deviations of 0.84%and 1.04%,respectively.
文摘Binary alloy samples consisting of poly（phenylene sulfide） （PPS）/poly（ethylene terephthalate-co-cyclohexane 1,4-dimethanol terephthalate） （PETG） blend were prepared by the melt blending technology using a twin-screw extruder. The nonisothermal crystallization kinetics of binary alloys made of poly（phenylene sulfide） （PPS） and poly（ethyleneco-cyclohexane 1,4-dimethanol terephthalate） （PETG） was studied by the differential scanning calorimetry （DSC） at different cooling rates. The test results revealed that the addition of PETG could shift the crystallization temperature of PPS toward the high-temperature direction. The nonisothermal crystallization kinetic parameters of the PPS/PETG alloy samples were calculated by the methods proposed by Avrami and Mo. Test results demonstrated that the PPS/PETG alloy could give birth to apparent secondary crystallization. The value of Avrami exponent was lower relatively, while Mo＇s method was more suited to the nonisothermal crystallization process of the PPS/PETG alloy.
基金Supported by the Youths Foundation of Wuhan Institute of Technology(Q200902)the Graduate Innovative Fund of Wuhan Institute of Technology(CX201101)
文摘Polypropylene(PP)with different contents of the second generation hyperbranched polyester(HBP)is prepared by melt blending method.The non-isothermal crystallization kinetics of PP and PP/HBP blends is investigated under differential scanning calorimetry(DSC).The Mo equation is used to analyze the DSC data.The results show that the Mo theory is suitable for crystallization kinetics of the blends.Fast cooling rate is not good for crystallizing and nucleating.The values of half crystallization time(t1/2),crystallization enthalpy(ΔHc)and temperature range(ΔT)of PP/HBP blends decrease when HBP is added.The required cooling rate of PP is higher than that of PP/HBP blends in order to reach the same relative crystallinity.Crystallization rate increases with the addition of HBP.The crystallization rate reaches a maximum when the content of HBP is 5%.In addition,the activation energies of PP and PP/HBP blends are calculated by Kissinger equation,revealing that the content of HBP has a little effect on the crystallization activation energy.
基金The National Natural Science Foundation of China (No. 20374032) and Tianjin Science and Technology Key Project (No. 05YFSZSF02200)
文摘Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.
文摘A novel chain complex was synthesized and its crystal structure has been deter- mined by X-ray diffraction technique. It was found that the local coordination geometry around Cu(Ⅱ) is a distorted tetrahedron and C14H9CuNO3CH3OH is bridged by the carboxylate oxygen atom to form an infinite one-dimensional linear chain. The hydrogen bond exists between O(1) and solvate molecule O(4). The crystal belongs to monoclinic, space group P21 with a = 9.6650(19), b = 7.1280(14), c = 9.925(2) ? b = 98.39(3)? V = 676.4(2) 3, Z = 2, F(000) = 342 and m(MoK? = 1.629 mm-1 .
文摘A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.
基金supported by the National Basic Research Program of China (2012CB025901)the National Natural Science Foundation of China (21174139)the Open Research Fund of State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences
文摘A significant enhancement in isothermal crystallization kinetics of biodegradable polylactide(PLA) in its immiscible blends can be accomplished through blending it with a comb-like copolymer. PLA was blended with poly(ethylene glycol) methyl ether acrylate(PEGA) and poly[poly(ethylene glycol) methyl ether acrylate](PPEGA, a comb-like copolymer), respectively. The results measured from phase contrast optical microscopy(PCOM) and differential scanning calorimetry(DSC) indicate that PLA and PEGA components are miscible, whereas PLA and PPEGA components are immiscible. The study of crystallization kinetics for PLA/PEGA and PLA/PPEGA blends by means of polarized optical microscopy(POM) and DSC indicates that both PEGA and PPEGA significantly increase the PLA spherulitic growth rates, G, although PLA/PPEGA blends are immiscible and the glass transition temperatures of PLA only have slight decreases. PPEGA component enhances nucleation for PLA crystallization as compared with PEGA component owing to the heterogeneous nucleation effect of PPEGA at the low composition of 20 wt%, while PLA crystallization-induced phase separation for PLA/PEGA blend might cause further nucleation at the high composition of 50 wt%. DSC measurement further demonstrates that isothermal crystallization kinetics can be relatively more enhanced for PLA/PPEGA blends than for PLA/PEGA blends. The "abnormal" enhancement in G for PLA in its immiscible blends can be explained by local interfacial interactions through the densely grafted PEGA side chains in the comb-like PPEGA, even though the whole blend system(PLA/PPEGA blends) represents an immiscible one.
基金supported by the National Basic Research Program of China (2005CB623800)National Natural Science Foundation of China (51173157)Natural Science Foundation of Zhejiang Province (Y4100314)
文摘Impact polypropylene copolymer (IPC), named polypropylene catalloy, not only possesses excellent impact property, but also presents good rigidity. Its superior performances result from the complicated composition and microstructure. In the present article, recent progress in the studies on microstructure, morphology, crystallization and rheological behavior of IPC is summarized, and findings of the authors and their collaborators are reported. In general, IPC is divided into three components, i.e., ethylene-propylene random copolymer (EPR), a series of different segment lengths ethylene-propylene copolymer (EbP) and propylene homopolymer. The reasonable macromolecular structures of EbP and a multilayered core-shell model of dispersed phase structure in IPC were proposed, in which the dispersed phase consists of an outer EbP shell, an inner EPR layer and an EbP core. It is found that the annealing at melt-state may lead to an abnormal phase inversion, and the phase inversion disappears when temperature cools down to room temperature. The cause of phase inversion is ascribed to the existence of EbP component, which results in the stronger activity of the dispersed phase. The crystalline structure and morphologic results confirm the formation of β-iPP in IPC. Furthermore, it is found that the ethylene content in IPC and cooling rate of the samples have an important influence on the formation of β-iPP. Based on the crystallization kinetics analyzed by Lauritzen-Hoffman theory, crystallization behavior of different IPC samples is discussed and it is proposed that the dilution effect of ethylene propylene copolymer has a more remarkable influence on surface nucleation than on crystal growth. In addition, annealing at high temperature can result in the changes of chain structure for IPC, and this instability is ascribed to the oxidative degradation and crosslink reaction mainly in iPP component.
基金supported by the National Natural Science Foundation of China (20772094)
文摘This paper reports a new donor-acceptor copolymer semiconductor, PTBTh, comprising bithiophene and bithiazole where the regular coplanar structure and the intramolecular charge transfer are expected to increase the opportunity for --- stacking and charge transport. The AFM image shows lamellar stacking of the polymer on the surface. The field-effect transistor (FET) properties of PTBTh have been evaluated by a bottom-contact/bottom-gate TFT configuration. The device showed a high hole mobility of 1.14×10-2 cm2 V-1 s-1 and a current on/off ratio of 3×105 with the polymer thin film annealed at a mild temperature of 120 ℃ when measured under ambient conditions.
文摘An ordered nanostructure formed by epitaxial crystallization of a semicrystalline block copolymer on a substrate has been used as a patterned template for the selective deposition of thermally evaporated gold nanoparticles, resulting in the formation of structure-guiding host nanocomposites in which the ordered distribution of the guest particles is guided by the ordering of the host nanostructured block copolymer matrix. This opens new perspectives in the field of polymeric composites related to the maximum enhancement of effective physical properties and to the numerous possible applications that arise due to the presence of long-range order in the spatial distribution of functional nanoparticles.
基金supported by the National Natural Science Foundation of China (21134002, 21504011)the Specialized Research Fund for the Doctoral Program of Higher Education (20130041130004)the Chang Jiang Scholars Program (T2011056) from Ministry of Education of the People’s Republic of China
文摘Stereoselective interaction was observed in the mixture of enantiopure gradient polycarbonate(denoted as PCOPC-g-PCPC, originated from the enantioselective terpolymerization of CO2, 3,4-epoxytetrahydrofuran(COPO) and cyclopentene oxide(CPO)) and various isotactic polycarbonates with opposite configuration in chloroform solution. The resultant crystalline stereocomplexes exhibit enhanced thermal stability and new crystalline behaviors, significantly distinct from their parent polymers. It was found that the cocrystallization selectively occurred between(R)-PCOPC(CO_2/COPO copolymer) and(S)-PCOPC-enriched segment in the gradient terpolymer(S)-PCOPC-g-PCPC, while(R)-PCPC(CO_2/CPO copolymer) selectively complexed with(S)-PCPC-enriched segment. No stereocomplexation was observed between(S)-PCOPC-g-PCPC and(S)-PCOPC or(S)-PCPC. This study is beneficial to finding new routes to prepare various semicrystalline materials having a wide variety of physical properties and degradability.
