The paper follows from the theory of explosion and interaction of an impact wave formed by the explosion and a structure. Firstly, the paper determines the parameters of the blast wave excited by a small charge explos...The paper follows from the theory of explosion and interaction of an impact wave formed by the explosion and a structure. Firstly, the paper determines the parameters of the blast wave excited by a small charge explosion. The empirical formulas on the basis of our own experimental results are shown and used for the structure analysis. Evaluations of structures loaded by an explosion based on dynamic response in rotations round the central line of plate or beam systems during the dynamic load of this type is discussed in the paper and comparison of own limit values and published ones is presented. Blast loads typically produce very high strain rates in the range of 102 to 10-4 s-1. The effect of strain rate for concrete material is discussed. The formulas for increased compressive strength of concrete and steel reinforcement are presented. The ductility of structural members is influenced by the corresponding values under high strain rate of reinforcement, Damage to the structure is assessed accordingly firstly by the angle of rotation of the middle axis/surface, and secondly by the limit internal forces of the selected structure. The extreme nature of blast resistance makes it necessary to accept that structural members have some degree of inelastic response in most cases. This enables the application of structure dissipation using the ductility factor and increased of concrete strength. The limits are correlated with qualitative damage expectations. The methodology of dynamic response assessment and its application to the simple bridge structure is discussed.展开更多
In order to study the seismic performance of typical approach bridge for port project, the seismic vulnerability model was created. 100 of the earthquake motion records are selected from the database of Pacific Earthq...In order to study the seismic performance of typical approach bridge for port project, the seismic vulnerability model was created. 100 of the earthquake motion records are selected from the database of Pacific Earthquake Research Centre, In order to obtain the maximum responses of structure dynamic response, the model was calculated by using non-linear time history analysis. Then reliability analysis method was used to generate the fragility curves of bridge components. And compared two kinds of bearing made differences to structure＇ s vulnerability. Researches show that bearing is easy to breakdown with earthquake action. Isolation bearing has good effect, and significantly reduces failure probability, fmaUy the fragility curves obtained can be used to evaluate the seismic performance of continuous beam bridge for port project, and provide the basis for seismic design of bridges for port project.展开更多
The ship hull is simplified as a free beam with varying sections. Based on hydroelasticity and explosion mechanics theory,mechanical model and kinetic equation for hull girder vibration under non-contact explosion are...The ship hull is simplified as a free beam with varying sections. Based on hydroelasticity and explosion mechanics theory,mechanical model and kinetic equation for hull girder vibration under non-contact explosion are established. The equation is solved by Wilson-θ algorithm. On the basis of the above principles,a structure kinetics analysis program is compiled. The dynamic response of supposed warship under air explosion is calculated conveniently and quickly. Under the explosion condition designed in the paper,the positive pressure period of non-contact explosion wave is much less than the natural periods of the first four modes of hull girder and the resonance of ship girder overall vibration can be avoided. The ratio of midship maximum moment to ultimate bearing strength under non-contact explosion accelerates with the increment of impact factor.展开更多
文摘The paper follows from the theory of explosion and interaction of an impact wave formed by the explosion and a structure. Firstly, the paper determines the parameters of the blast wave excited by a small charge explosion. The empirical formulas on the basis of our own experimental results are shown and used for the structure analysis. Evaluations of structures loaded by an explosion based on dynamic response in rotations round the central line of plate or beam systems during the dynamic load of this type is discussed in the paper and comparison of own limit values and published ones is presented. Blast loads typically produce very high strain rates in the range of 102 to 10-4 s-1. The effect of strain rate for concrete material is discussed. The formulas for increased compressive strength of concrete and steel reinforcement are presented. The ductility of structural members is influenced by the corresponding values under high strain rate of reinforcement, Damage to the structure is assessed accordingly firstly by the angle of rotation of the middle axis/surface, and secondly by the limit internal forces of the selected structure. The extreme nature of blast resistance makes it necessary to accept that structural members have some degree of inelastic response in most cases. This enables the application of structure dissipation using the ductility factor and increased of concrete strength. The limits are correlated with qualitative damage expectations. The methodology of dynamic response assessment and its application to the simple bridge structure is discussed.
文摘In order to study the seismic performance of typical approach bridge for port project, the seismic vulnerability model was created. 100 of the earthquake motion records are selected from the database of Pacific Earthquake Research Centre, In order to obtain the maximum responses of structure dynamic response, the model was calculated by using non-linear time history analysis. Then reliability analysis method was used to generate the fragility curves of bridge components. And compared two kinds of bearing made differences to structure＇ s vulnerability. Researches show that bearing is easy to breakdown with earthquake action. Isolation bearing has good effect, and significantly reduces failure probability, fmaUy the fragility curves obtained can be used to evaluate the seismic performance of continuous beam bridge for port project, and provide the basis for seismic design of bridges for port project.
文摘The ship hull is simplified as a free beam with varying sections. Based on hydroelasticity and explosion mechanics theory,mechanical model and kinetic equation for hull girder vibration under non-contact explosion are established. The equation is solved by Wilson-θ algorithm. On the basis of the above principles,a structure kinetics analysis program is compiled. The dynamic response of supposed warship under air explosion is calculated conveniently and quickly. Under the explosion condition designed in the paper,the positive pressure period of non-contact explosion wave is much less than the natural periods of the first four modes of hull girder and the resonance of ship girder overall vibration can be avoided. The ratio of midship maximum moment to ultimate bearing strength under non-contact explosion accelerates with the increment of impact factor.
