三维振动辅助铣削创成结构型表面的建模与振动参数影响仿真分析

结构型表面因良好的表面特性被广泛应用于光学、生物以及航空航天等重要领域。提出三维振动辅助铣削制备结构型表面的方法,分析施加三维振动激励条件下的铣削加工轨迹。基于正交螺旋理论和空间矩阵变换建立三维振动辅助铣削模型,在正弦函数曲面面型上预测生成的结构型表面微结构形态。探究了振幅以及振动频率对结构型表面微结构形貌的影响规律。

结构型表面活性剂体系的研究

从结构型表面活性剂体系 (SSF) (即StructuredSurfactantFormulations)的性能、工艺、技术特点 ,配方多样性 ,复配优势、相行为、流变学性质及其应用和组分特性等方面出发 ,详细研究和探讨了结构型表面活性剂体系的结构特征。结果表明 ,SSF的特殊结构和性能将日益受到人们的重视 ,为洗涤行业开拓了一条崭新的领域。

A new electromagnetic functional material composed of metallic hollow micro-spheres

This paper presents a new electromagnetic functional material developed byelectron-less nickel deposition technique, with a single hollow micro-sphere as the core templateand a thin nickel layer as the shell. The micrograph taken by a scanning electron microscope showsthe microstructures of the materials in detail. Scattering parameters of the waveguide sample holderfilled with the materials have been obtained over X band. The electromagnetic parameters computedfrom the measured S parameters show that the material with metallic hollow spheres has as highrelative permeability μ'_r as 19.0 with about 0.6 magnetic loss tangent over the whole bandwidth.Compared to the material with non-metallic spheres, the permeability μ'_r and the magnetic losstangent μ'_r increase greatly, while the permittivity remains lower than 1.8.

Catalytic Performance and Characterization of Anatase TiO_(2) Supported Pd Catalysts for the Selective Hydrogenation of Acetylene

Anatase TiO_(2)nanospindles containing 89%exposed{101}facets(TIO_(2)-101)and nanosheets with 77%exposed{001}facets(TiO_(2)-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the TiO_(2)materials on the catalytic performance of Pd/TiO_(2)-101 and Pd/TiO_(2)-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene.The PdfTiO_(2)-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield.To understand these effects,the catalysts were characterized by H_(2)temperature-programmed desorption(H_(2)-TPD),H_(2)temperature-programmed reduction(H=-TPR),transmission electron microscopy(TEM),pulse CO chemisorption,X-ray photoelectron spectroscopy(XPS),and thermogravimetric analysis(TGA).The TEM and CO chemisorption results confirmed that Pd nanoparticles(NPs)on the TiO_(2)-101 support had a smaller average particle size(1.53 nm)and a higher dispersion(15.95%)than those on the TiO_(2)-001 support(average particle size of 4.36 nm and dispersion of 9.06%).The smaller particle size and higher dispersion of Pd on the Pd/TiO_(2)-101 catalyst provided more reaction active sites,which contributed to the improved catalytic activity of this supported catalyst.

Estimation of surface tension of organic compounds using quantitative structure-property relationship

A novel quantitative structure-property relationship （QSPR） model for estimating the solution surface tension of 92 organic compounds at 20℃ was developed based on newly introduced atom-type topological indices. The data set contained non-polar and polar liquids, and saturated and unsaturated compounds. The regression analysis shows that excellent result is obtained with multiple linear regression. The predictive power of the proposed model was discussed using the leave-one-out （LOO） cross-validated （CV） method. The correlation coefficient （R） and the leave-one-out cross-validation correlation coefficient （Rcv） of multiple linear regression model are 0.991 4 and 0.991 3, respectively. The new model gives the average absolute relative deviation of 1.81% for 92 substances. The result demonstrates that novel topological indices based on the equilibrium electro-negativity of atom and the relative bond length are useful model parameters for QSPR analysis of compounds.

Multiple-dimensional micro/nano structural models for hydrophobicity of butterfly wing surfaces and coupling mechanism

The microstructure, wettability and chemical composition of the butterfly wing surfaces were investigated by a scanning electron microscope, a contact angle meter and a Fourier transform infrared spectrometer. The micro/nano structural models for hydrophobicity of the butterfly wing surfaces were established on the basis of the Cassie equation. The hydrophobicity mechanisms were discussed from the perspective of biological coupling. The butterfly wing surfaces are composed of naturally hydrophobic material and possess micro/nano hierarchical structures, including primary structure （micrometric scales）, secondary structure （nano longitudinal ridges and lateral bridges） and tertiary structure （nano stripes）. The wing surfaces exhibit high hydrophobicity （contact angle 138°-157°） and low adhesion （sliding angle 1°-3°）. The micromorphology and self-cleaning performance of the wing surfaces demonstrate remarkable anisotropism. The special complex wettability ascribes to a coupling effect of the material element and the structure element. In microdimension, the smaller the width and the bigger the spacing of the scale, the stronger the hydrophobicity of the wing surfaces. In nano-dimension, the smaller the height and the smaller the width and the bigger the spacing of the longitudinal ridge, the stronger the hydrophobicity of the wing surfaces. This work promotes our understanding of the hydrophobicity mechanism of bio-surfaces and may bring inspiration for biomimetic design and preparation of smart interfacial materials.