Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reli...Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reliability mathematics and stochastic processes areconstructed, and the pure theoretical formulae of failure probability of prestressed concretestructures are analyzed. In addition, a simple durability design method for carbonation ofstructures is put forward. According to the analysis, the durability of prestressed concretestructures is superior to that of traditional structures. The research also indicates that theconcrete cover prescribed in the current code (GB 50010-2002) is not adequate. The rational coverthickness should notbe less than 35 or 45 mm according to carbonation or chloride ion attack,respectively.展开更多
A numerical study of bitubular tubes with diaphragms compared with single and bitubular tubes subjected to dynamic axial impact force was presented. At first, the energy absorption response of the composite structure ...A numerical study of bitubular tubes with diaphragms compared with single and bitubular tubes subjected to dynamic axial impact force was presented. At first, the energy absorption response of the composite structure under axial loading was analyzed by finite element simulation. The results show that the efficiency of energy absorption can be improved by introducing diaphragms to the double-walled columns. Then, the effect of the amount and location of diaphragms, the shape and the size of the inner tubes, and the thickness of the composite structures were also studied numerically. The collision performance of the composite structure is affected by the deformation of diaphragms, as well as the interaction of outer and inner tube. The non-uniform distribution of diaphragms can improve the energy absorption efficiency of structures for a constant number of diaphragms. The specific energy absorption of the hexagonal inner tube is the highest, followed by the circular, octagonal and square ones.展开更多
Hybridization of carbon nanotubes （CNT） with graphene provides a promising means of integrating the attributes of both materials, thereby enabling widespread application. Here, we present a method to directly assemb...Hybridization of carbon nanotubes （CNT） with graphene provides a promising means of integrating the attributes of both materials, thereby enabling widespread application. Here, we present a method to directly assemble hybrid CNT- graphene films by a blown bubble method combined with selective substrate annealing. We use polymethylmethacrylate （PMMA） as the polymeric matrix to blow bubbles containing self-assembled multi-walled CNT arrays, and then transform the bubble film into a CNT-graphene hybrid film by thermal annealing on a Cu substrate; PMMA serves as the carbon source for growing single to few-layer graphene among the CNT network until a continuously hybridized structure is formed. Compared to the bare （non-hybridized） CNT networks, the hybrid films exhibit improved electrical conductivity and structural integrity. Our method also enables the fabrication of a multi-walled CNT-Si solar cell, which has high power conversion efficiency, through the assembly of hybrid CNT-graphene structures.展开更多
Al-doped ZnO(AZO) has been used as an electron transport and hole blocking buffer layer in inverted organic solar cells(IOSCs). In this paper, the AZO morphology, optical and structural properties and IOSCs performanc...Al-doped ZnO(AZO) has been used as an electron transport and hole blocking buffer layer in inverted organic solar cells(IOSCs). In this paper, the AZO morphology, optical and structural properties and IOSCs performance are investigated as a function of precursor solution concentration from 0.1 mol/L to 1.0 mol/L. We demonstrate that the device with 0.1 mol/L precursor concentration of AZO buffer layers enhances the short-circuit current and the fill factor of IOSCs simultaneously. The resulting device shows that the power conversion efficiency is improved by 35.6% relative to that of the 1.0 mol/L device, due to the improved surface morphology and transmittance(300–400 nm) of AZO buffer layer.展开更多
This paper describes the characteristics of a single-base repairable inventory system and multi-indenture structure with communality and redundancy. At the base, there are a working field that has a maximum of z equip...This paper describes the characteristics of a single-base repairable inventory system and multi-indenture structure with communality and redundancy. At the base, there are a working field that has a maximum of z equipment on line and its repair channels, which mainly consist of two centers： line replaceable units （LRUs） diagnostic center and shop replaceable units （SRUs） repair center. In these two centers, the resources are finite and different. We introduce routing probabilities to express the repair relationships between resources and failed replaced units. The diagnostic time follows exponential distribution and SRU repair time follows general distribution with known average. We analyze the general model of this system, and present an approximate solution that uses two-step negative binomial approximation to obtain the expected backorders of all LRUs. The first step is fitting negative binomial distributions to the distributions of the number for all SitUs at the repair center, and the second is fitting negative binomial distributions to the convolutions of the distributions of the number for all LRUs in diagnostic and assemblydelayed. Thus, we give the approximate value of operational awilability of equipment based on this method. Finally, the results under two policies of routing probabilities are compared by the optimal curves.展开更多
文摘Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reliability mathematics and stochastic processes areconstructed, and the pure theoretical formulae of failure probability of prestressed concretestructures are analyzed. In addition, a simple durability design method for carbonation ofstructures is put forward. According to the analysis, the durability of prestressed concretestructures is superior to that of traditional structures. The research also indicates that theconcrete cover prescribed in the current code (GB 50010-2002) is not adequate. The rational coverthickness should notbe less than 35 or 45 mm according to carbonation or chloride ion attack,respectively.
基金Projects(U1334208,51405516,51275532) supported by the National Natural Science Foundation of ChinaProject(2015ZZTS045) supported by the Fundamental Research Funds for the Central Universities of China
文摘A numerical study of bitubular tubes with diaphragms compared with single and bitubular tubes subjected to dynamic axial impact force was presented. At first, the energy absorption response of the composite structure under axial loading was analyzed by finite element simulation. The results show that the efficiency of energy absorption can be improved by introducing diaphragms to the double-walled columns. Then, the effect of the amount and location of diaphragms, the shape and the size of the inner tubes, and the thickness of the composite structures were also studied numerically. The collision performance of the composite structure is affected by the deformation of diaphragms, as well as the interaction of outer and inner tube. The non-uniform distribution of diaphragms can improve the energy absorption efficiency of structures for a constant number of diaphragms. The specific energy absorption of the hexagonal inner tube is the highest, followed by the circular, octagonal and square ones.
基金This work was financially supported by the National Nature Science Foundation of China （Nos. 91127004 and 51325202）.
文摘Hybridization of carbon nanotubes （CNT） with graphene provides a promising means of integrating the attributes of both materials, thereby enabling widespread application. Here, we present a method to directly assemble hybrid CNT- graphene films by a blown bubble method combined with selective substrate annealing. We use polymethylmethacrylate （PMMA） as the polymeric matrix to blow bubbles containing self-assembled multi-walled CNT arrays, and then transform the bubble film into a CNT-graphene hybrid film by thermal annealing on a Cu substrate; PMMA serves as the carbon source for growing single to few-layer graphene among the CNT network until a continuously hybridized structure is formed. Compared to the bare （non-hybridized） CNT networks, the hybrid films exhibit improved electrical conductivity and structural integrity. Our method also enables the fabrication of a multi-walled CNT-Si solar cell, which has high power conversion efficiency, through the assembly of hybrid CNT-graphene structures.
基金supported by the National Natural Science Foundation of China(No.61377031)the Scientific Research Foundation of Zhejiang Ocean University(No.Q1444)
文摘Al-doped ZnO(AZO) has been used as an electron transport and hole blocking buffer layer in inverted organic solar cells(IOSCs). In this paper, the AZO morphology, optical and structural properties and IOSCs performance are investigated as a function of precursor solution concentration from 0.1 mol/L to 1.0 mol/L. We demonstrate that the device with 0.1 mol/L precursor concentration of AZO buffer layers enhances the short-circuit current and the fill factor of IOSCs simultaneously. The resulting device shows that the power conversion efficiency is improved by 35.6% relative to that of the 1.0 mol/L device, due to the improved surface morphology and transmittance(300–400 nm) of AZO buffer layer.
文摘This paper describes the characteristics of a single-base repairable inventory system and multi-indenture structure with communality and redundancy. At the base, there are a working field that has a maximum of z equipment on line and its repair channels, which mainly consist of two centers： line replaceable units （LRUs） diagnostic center and shop replaceable units （SRUs） repair center. In these two centers, the resources are finite and different. We introduce routing probabilities to express the repair relationships between resources and failed replaced units. The diagnostic time follows exponential distribution and SRU repair time follows general distribution with known average. We analyze the general model of this system, and present an approximate solution that uses two-step negative binomial approximation to obtain the expected backorders of all LRUs. The first step is fitting negative binomial distributions to the distributions of the number for all SitUs at the repair center, and the second is fitting negative binomial distributions to the convolutions of the distributions of the number for all LRUs in diagnostic and assemblydelayed. Thus, we give the approximate value of operational awilability of equipment based on this method. Finally, the results under two policies of routing probabilities are compared by the optimal curves.
