Optimization of land use structure consists of economic and social and ecological optimization.Applying the minds of system engineering and principles of ecology,this paper presents such thoughts:the optimal forest_co...Optimization of land use structure consists of economic and social and ecological optimization.Applying the minds of system engineering and principles of ecology,this paper presents such thoughts:the optimal forest_coverage rate calculated according to the reality of a district is set as main standard of ecological rationality in the district;through considering the value of ecosystem services of the land with GREEN equivalent (mainly cultivated land and grassland)and based on the rule,GREEN equivalent,this paper introduces the area conversion between woodland and cultivated land,also between woodland and grassland;this paper establishes a multi_dimension controlling model of optimization of land use structure.In addition,a multi_objective linear programming model for optimization of land use structure is designed.In the end,this paper tests and verifies this theory of ecological optimization,taking Qionghai city in Hainan Province as an example.展开更多
The ＂neat＂ operation of the two-reactant reactive distillation column has Oetter steady-state economics, while It presents a challenge for design, optimization, and control of the process. Based on the optimal econo...The ＂neat＂ operation of the two-reactant reactive distillation column has Oetter steady-state economics, while It presents a challenge for design, optimization, and control of the process. Based on the optimal economic design, the dual-composition control structure and dual-temperature control structure are designed respectively for the benzene chlorine consecutive reactive distillation process. The effectiveness and robustness are analyzed comparably for the disturbance resistance in terms of changes of production rate and feed composition. Results show that dual-temperature control with propose selection of tray temperatures and the optimal profile of the set point can provide better transient process performance than the composition control structure.展开更多
The aim of this study is to use a new configuration of porous media in a heat exchanger in continuous hydrothermal flow synthesis(CHFS)system to enhance the heat transfer and minimize the required length of the heat e...The aim of this study is to use a new configuration of porous media in a heat exchanger in continuous hydrothermal flow synthesis(CHFS)system to enhance the heat transfer and minimize the required length of the heat exchanger.For this purpose,numerous numerical simulations are performed to investigate performance of the system with porous media.First,the numerical simulation for the heat exchanger in CHFS system is validated by experimental data.Then,porous media is added to the system and six different thicknesses for the porous media are examined to obtain the optimum thickness,based on the minimum required length of the heat exchanger.Finally,by changing the flow rate and inlet temperature of the product as well as the cooling water flow rate,the minimum required length of the heat exchanger with porous media for various inlet conditions is assessed.The investigations indicate that using porous media with the proper thickness in the heat exchanger increases the cooling rate of the product by almost 40% and reduces the required length of the heat exchanger by approximately 35%.The results also illustrate that the most proper thickness of the porous media is approximately equal to 90% of the product tube's thickness.Results of this study lead to design a porous heat exchanger in CHFS system for various inlet conditions.展开更多
The UNEXPO （National Experimental Polytechnic University） system is a public institution dedicated to teaching and researching in engineering area. It was formed to bring together three main institutes located in Ve...The UNEXPO （National Experimental Polytechnic University） system is a public institution dedicated to teaching and researching in engineering area. It was formed to bring together three main institutes located in Venezuelan cities and three more institutes located in rural areas, so that to collectively and collaboratively serve the regions in optimal ways. The academic activity started in 1982 graduating engineers and technicians, although less effort has shown by authorities to develop programs in graduate engineering areas. A proposal for designing a structured graduate program is presented. The structured program presented, will hopefully set the basis to develop graduate and doctoral studies in engineering and related areas to the whole university system, and to achieve academic and social development to the country.展开更多
To investigate the fan performance of air conditioning system, two different configuration fan test systems are designed. All scale simulation of the two systems provide the basis for design and improvement of air con...To investigate the fan performance of air conditioning system, two different configuration fan test systems are designed. All scale simulation of the two systems provide the basis for design and improvement of air conditioning system fans to improve the internal flow, increase air volume, and reduce the noise. The conclusion that disturbance on flow of nuzzle outlet is the main sources of measurement error about 5% can be proved by the comparative analysis of the results between computation and experiment. Through Optimization Design of Partial Structure they all meet the industry standard, measurement error less than 1.5%.展开更多
文摘Optimization of land use structure consists of economic and social and ecological optimization.Applying the minds of system engineering and principles of ecology,this paper presents such thoughts:the optimal forest_coverage rate calculated according to the reality of a district is set as main standard of ecological rationality in the district;through considering the value of ecosystem services of the land with GREEN equivalent (mainly cultivated land and grassland)and based on the rule,GREEN equivalent,this paper introduces the area conversion between woodland and cultivated land,also between woodland and grassland;this paper establishes a multi_dimension controlling model of optimization of land use structure.In addition,a multi_objective linear programming model for optimization of land use structure is designed.In the end,this paper tests and verifies this theory of ecological optimization,taking Qionghai city in Hainan Province as an example.
基金Supported by the National Natural Science Foundation of China(61203020,21276126)Jiangsu Province Natural Science Foundation(BK2011795)National Key Technology Research and Development Program of the Ministry of Science and Technology of China(2011BAE18B01)
文摘The ＂neat＂ operation of the two-reactant reactive distillation column has Oetter steady-state economics, while It presents a challenge for design, optimization, and control of the process. Based on the optimal economic design, the dual-composition control structure and dual-temperature control structure are designed respectively for the benzene chlorine consecutive reactive distillation process. The effectiveness and robustness are analyzed comparably for the disturbance resistance in terms of changes of production rate and feed composition. Results show that dual-temperature control with propose selection of tray temperatures and the optimal profile of the set point can provide better transient process performance than the composition control structure.
文摘The aim of this study is to use a new configuration of porous media in a heat exchanger in continuous hydrothermal flow synthesis(CHFS)system to enhance the heat transfer and minimize the required length of the heat exchanger.For this purpose,numerous numerical simulations are performed to investigate performance of the system with porous media.First,the numerical simulation for the heat exchanger in CHFS system is validated by experimental data.Then,porous media is added to the system and six different thicknesses for the porous media are examined to obtain the optimum thickness,based on the minimum required length of the heat exchanger.Finally,by changing the flow rate and inlet temperature of the product as well as the cooling water flow rate,the minimum required length of the heat exchanger with porous media for various inlet conditions is assessed.The investigations indicate that using porous media with the proper thickness in the heat exchanger increases the cooling rate of the product by almost 40% and reduces the required length of the heat exchanger by approximately 35%.The results also illustrate that the most proper thickness of the porous media is approximately equal to 90% of the product tube's thickness.Results of this study lead to design a porous heat exchanger in CHFS system for various inlet conditions.
文摘The UNEXPO （National Experimental Polytechnic University） system is a public institution dedicated to teaching and researching in engineering area. It was formed to bring together three main institutes located in Venezuelan cities and three more institutes located in rural areas, so that to collectively and collaboratively serve the regions in optimal ways. The academic activity started in 1982 graduating engineers and technicians, although less effort has shown by authorities to develop programs in graduate engineering areas. A proposal for designing a structured graduate program is presented. The structured program presented, will hopefully set the basis to develop graduate and doctoral studies in engineering and related areas to the whole university system, and to achieve academic and social development to the country.
基金supported by grants from the National Natural Science Foundation of China (No.50976044)
文摘To investigate the fan performance of air conditioning system, two different configuration fan test systems are designed. All scale simulation of the two systems provide the basis for design and improvement of air conditioning system fans to improve the internal flow, increase air volume, and reduce the noise. The conclusion that disturbance on flow of nuzzle outlet is the main sources of measurement error about 5% can be proved by the comparative analysis of the results between computation and experiment. Through Optimization Design of Partial Structure they all meet the industry standard, measurement error less than 1.5%.
