High-water material, tailings from goldmine and water are mixed into a new slurry.Testing of rheological properties of stowing slurries A and B is made to determine type and rheological parameters of the slurry. The m...High-water material, tailings from goldmine and water are mixed into a new slurry.Testing of rheological properties of stowing slurries A and B is made to determine type and rheological parameters of the slurry. The main factors influencing rheological properties of the slurry are analyzed and the rational concentration and empirical resistance calculating formula of pipe line transportation are presented.展开更多
This paper presents a simple approach of a topology already known in the literature, applied in active power transfer from direct current source to any alternating current voltage source, whether the utility power or ...This paper presents a simple approach of a topology already known in the literature, applied in active power transfer from direct current source to any alternating current voltage source, whether the utility power or a voltage inverter that is forming an isolated AC grid. The photovoltaic inverter works as current controlled voltage source inverter that provides a sinusoidal current to the AC grid. The inverter is insulated from the grid by a transformer. The system is discussed and modeled. Simulation results of this application are presented and experimental results validate this topology.展开更多
A Cu-50Cr alloy was treated by the high current pulsed electron beam(HCPEB)at 20 and 30 ke V with pulse numbers ranging from 1 to 100.Surface morphologies and microstructures of specimens before and after the treatmen...A Cu-50Cr alloy was treated by the high current pulsed electron beam(HCPEB)at 20 and 30 ke V with pulse numbers ranging from 1 to 100.Surface morphologies and microstructures of specimens before and after the treatments were investigated by employing scanning electron microscopy and X-ray diffraction.Results show that the HCPEB technique is able to induce remarkable surface modifications for the Cu-50Cr alloy.Cracks in Cr phases appear even after one-pulse treatment and their density always increases with the pulse number.Formation reason for these cracks is attributed to quasi-static thermal stresses accumulated along the specimen surface.Craters with typical morphologies are formed due to the dynamic thermal field induced by the HCPEB and they are found to prefer the sites near cracks or boundaries between neighboring Cr phases.Another microstructural characteristic produced by the HCPEB is the fine Cr spheroids,which are determined to be due to occurrence of liquid phase separation in the Cu-50Cr alloy.Finally,a general microstructural evolution profile that incorporates various HCPEB-induced surface features is tentatively outlined.展开更多
文摘High-water material, tailings from goldmine and water are mixed into a new slurry.Testing of rheological properties of stowing slurries A and B is made to determine type and rheological parameters of the slurry. The main factors influencing rheological properties of the slurry are analyzed and the rational concentration and empirical resistance calculating formula of pipe line transportation are presented.
文摘This paper presents a simple approach of a topology already known in the literature, applied in active power transfer from direct current source to any alternating current voltage source, whether the utility power or a voltage inverter that is forming an isolated AC grid. The photovoltaic inverter works as current controlled voltage source inverter that provides a sinusoidal current to the AC grid. The inverter is insulated from the grid by a transformer. The system is discussed and modeled. Simulation results of this application are presented and experimental results validate this topology.
基金supported by the National Natural Science Foundation of China(Grant Nos.51101177,51401040,51171146 and 51171216)the Natural Science Foundation of Chongqing(Grant No.CSTC2012JJA245)
文摘A Cu-50Cr alloy was treated by the high current pulsed electron beam(HCPEB)at 20 and 30 ke V with pulse numbers ranging from 1 to 100.Surface morphologies and microstructures of specimens before and after the treatments were investigated by employing scanning electron microscopy and X-ray diffraction.Results show that the HCPEB technique is able to induce remarkable surface modifications for the Cu-50Cr alloy.Cracks in Cr phases appear even after one-pulse treatment and their density always increases with the pulse number.Formation reason for these cracks is attributed to quasi-static thermal stresses accumulated along the specimen surface.Craters with typical morphologies are formed due to the dynamic thermal field induced by the HCPEB and they are found to prefer the sites near cracks or boundaries between neighboring Cr phases.Another microstructural characteristic produced by the HCPEB is the fine Cr spheroids,which are determined to be due to occurrence of liquid phase separation in the Cu-50Cr alloy.Finally,a general microstructural evolution profile that incorporates various HCPEB-induced surface features is tentatively outlined.
