河东金矿床矿体赋存规律研究

河东金矿位于焦家矿田内 ,属蚀变岩型金矿 ,矿床受望儿山断裂控制 ,矿体沿断裂带平行产出 ,上下盘围岩分别为玲珑型花岗岩和郭家岭似斑状花岗闪长岩。蚀变带由上至下出现绢英岩化花岗质碎裂岩、绢英岩、绢英岩化花岗闪长岩 ,金矿体赋存在强蚀变岩中。一般认为河东金矿的各矿体产于断裂带下盘部位 ,但本文研究认为 ,河东金矿的矿体确切地说应该位于两条主断裂之间的部位 ,尤其是组成菱形结环的分叉或汇合部位 ,河东金矿的1～

Interpretation of remote sensing of geological structures and prediction of gold mineralization in Mohe area and its adjacent region

The authors took the ETM+ multi-spectra data as the data information and correlation coefficient for each band and carried out their information volume statistics.According to certain criteria,the authors also determined the optimum band-combined image.The image clarity is improved by various enhancements and fusions method.Based on remote sensing geological interpretation in detail,the relationship between remote sensing geological characters and gold mine were analyzed systemically.Using all kinds of remote sensing structure information,combining other research data,the authors determined mainly ore-controlling ore structure.Several prospective areas of gold ores were determined and furthermore significant finding mine target areas was confirmed.

Velocity anomaly analysis on low-amplitude structure and its application in Bohai Sea:a case study on QHD33-1S structure

Varying degree of velocity anomalies has been appeared in Shijiutuo uplift in Bohai Sea,which is mainly demonstrated in the inconsistent between seismic interpretation and the actual drilling depth.In this paper, QHD33-1S area is taken as the example.First of all,the main reason that causes the velocity anomaly phenomena is the effect of sand-formation ratio by forward model analysis,and then technical approaches to improve the accuracy of the velocity field and the degree of understanding of anomalies are further explored,resulting in more precise determination of horizontal variation trend of the velocity in QHD33-1S area.Consequences of actual applications indicate that through the accurate analysis of the velocity anomaly,we can not only realize the fine description of low-amplitude structure,but also the effective prediction of the hydrocarbon-bearing properties of the reservoir.Meanwhile,the results also have a certain significance for the other low-amplitude structures in Bohai Sea.

Work Organization Model Applied on Smallholder Dairy Farms in Brazil

This research identified difficulties faced by dairy farmers in family farming, describing this diagnosis through ergonomic demand items （EDIs）. The objective was to elaborate an organization model of work related to dairy farming （WRDF）. As a methodology, a descriptive exploratory study was carried out in 14 family dairy farms that were visited and had their activities monitored. As main results, 11 EDIs were identified. The ones grouped in the infrastructure factor showed the highest resolution priority. The WRDF model was composed of three categories： management, public policies management and infrastructure, which were further subdivided into technical and social aspects. From this perspective, it is believed that the implementation of the model can bring organizational improvement, once adjustments are made in the procedures and working conditions. This study sheds light on the conditions that need to be resolved with higher priority so that the farmers will remain in the dairy business.

Preliminary analysis on the source properties and seismogenic structure of the 2017 M_s7.0 Jiuzhaigou earthquake

At GMT time 13：19, August 8, 2017, an M1.0 earthquake struck the Jiuzhaigou region in Sichuan Province, China, causing severe damages and casualties. To investigate the source properties, seismogenic structures, and seismic hazards, we systematically analyzed the tectonic environment, crustal velocity structure in the source region, source parameters and rupture process, Coulomb failure stress changes, and 3-D features of the rupture plane of the Jiuzhaigou earthquake. Our results indicate the following： （1） The Jiuzhaigou earthquake occurred on an unmarked fault belonging to the transition zone of the east Kunlun fault system and is located northwest of the Huya fault. （2） Both the mainshock and aftershock rupture zones are located in a region where crustal seismic velocity changes dramatically. Southeast to the source region, shear wave velocity at the middle to lower crust is significantly low, but it rapidly increases northeastward and lies close to the background velocity across the rupture fault. （3） The aftershock zone is narrow and distributes along the northwest-southeast trend, and most aftershocks occur within a depth range of 5-20 km. （4） The focal mechanism of the Jiuzhaigou earthquake indicates a left-lateral strike-slip fault, with strike, dip, and rake angles of 152~, 74~ and 8~, respectively. The hypocenter depth measures 20 km, whereas the centroid depth is about 6 kin. The co-seismic rupture mainly concentrates at depths of 3-13 km, with a moment magnitude （Mw） of 6.5. （5） The co-seismic rupture also strengthens the Coulomb failure stress at the two ends of the rupture fault and the east segment of the Tazang fault. Aftershocks relocation results together with geological surveys indicate that the causative fault is a near vertical fault with notable spatial variations： dip angle varies within 660-89~ from northwest to southeast and the average dip angle measures -84~. The results of this work are of fundamental importance for further studies on the source characteristics, tectonic environment, and seismic hazard evaluation of the Jiuzhaigou earthquake.

Simulation and Analysis of Microstructure Evolution of IN718 in Rotary Forgings by FEM

A numerical analysis was performed to study the influence of process parameters on the microstructure evolution of IN718 alloy in rotary forging using the finite element method （FEM）. For this purpose, a constitutive equation considering the effects of strain hardening and dynamic softening of IN718 alloy was built. The constitutive equation and microstructure models were implemented into the finite element code to investigate the microstructure evolution during rotary forging subject to large deformations. The simulations were carried out in the ratio of initial height to diameter range 0.2-0.8, the angle of the rocker 3°-7° and the relative feed per revolution range 0.01-0.1 r^-1. The research results revealed the deformation mechanism and the correlation of process parameters with the grain size evolution of IN718 alloy during rotary forging. These provide evidence for the selection of rotary forging parameters.