期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
一起10 kV厂用变压器事故原因分析及预防措施
1
作者 李新建 《装备维修技术》 2019年第2期99-99,共1页
虽然国内变压器行业经过多年发展,制造质量提升明显,但运行事故仍时有发生。本文以国内某电厂用10 kV厂用变差动故障为分析对象,首先依据事故现场检查情况,对事故进行了定性分析;结合进一步深入分析,对事故形成过程进行了推理,明确故障... 虽然国内变压器行业经过多年发展,制造质量提升明显,但运行事故仍时有发生。本文以国内某电厂用10 kV厂用变差动故障为分析对象,首先依据事故现场检查情况,对事故进行了定性分析;结合进一步深入分析,对事故形成过程进行了推理,明确故障成因,进而提出针对性的整改措施。 展开更多
关键词 厂用变 差动保护 绕组烧毁 绝缘碳化
下载PDF
Formation of Nickel Based Ohmic Contact to High Energy Vanadium Implanted n-Type 4H-SiC
2
作者 王超 张义门 +3 位作者 张玉明 郭辉 徐大庆 王悦湖 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2007年第11期1701-1705,共5页
The diffusion behavior of vanadium (V) implanted in SiC is investigated by secondary ion mass spec- trometry. Significant redistribution, especially out-diffusion of vanadium towards the sample surface, is not ob- s... The diffusion behavior of vanadium (V) implanted in SiC is investigated by secondary ion mass spec- trometry. Significant redistribution, especially out-diffusion of vanadium towards the sample surface, is not ob- served after 1650℃ annealing. Higher carrier concentration is obtained due to a lack of compensation of vanadium in the surface region. The electrical characteristics of Ni contacts to V-implanted n-type 4H-SiC are investigated using a linear transmission line method. A specific contact resistance as low as 4.4 × 10^-3Ω · cmA^2 is achieved after annealing at 1050℃ for 10min in gas ambient consisting of 90% N2 and 10% H2 X-ray diffraction analysis shows the formation of Ni2 Si and graphite phase at the interface after annealing. This provides the evidence that the car- bon vacancies,resulting from the out-diffusion of carbon atoms from SiC, contribute to the formation of ohmic contact through the reduction of effective Schottky barrier height for the transport of electrons. 展开更多
关键词 ohmic contact semi-insulating SiC V ion implantation diffusion carbon vacancies
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部