An asymmetry power clock,4 phase power clock supplying the power to the DSCRL(dual swing charge recovery logic) adiabatic circuit is presented.It is much simpler than the 6 phase power clock,symmetry power clock,us...An asymmetry power clock,4 phase power clock supplying the power to the DSCRL(dual swing charge recovery logic) adiabatic circuit is presented.It is much simpler than the 6 phase power clock,symmetry power clock,used in the DSCRL adiabatic circuit.Although the 4 phase power clock is simpler,the DSCRL adiabatic circuit still shows good performance and high efficiency of energy transfer and recovery.This conclusion has been proved by the result of the HSPICE simulation using the 0 6μm CMOS technology.展开更多
An IGBT subcircuit model is proposed and optimized,which is fully SPICE compatible.Based on analytical equations describing the semiconductor device physics,the model parameters are extracted accurately from the measu...An IGBT subcircuit model is proposed and optimized,which is fully SPICE compatible.Based on analytical equations describing the semiconductor device physics,the model parameters are extracted accurately from the measured data without device destruction.The IGBT n - layer conductivity modulated resistor is effectively modeled as a voltage controlled resistor.The proposed model can be used to accurately predict the IGBT output I-V characteristics and low current gain etc.The simulation results are verified by the comparison with measurements and found to be in good agreement with them.The error in average is within 8%,which is better than the results of semi-mathematical models reported previously.展开更多
Utilizing hybrid integration model.the integrated model optocouplers have successfully developed.The design,fabrication and characteristic parameters of the devices are presented.
First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked...First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.展开更多
The pressure characteristics inside single loop oscillating heat pipe （OHP） having 4.5 mm inner diameter copper tube with the loop height of 440 mm were addressed. Distilled water was used as working fluid inside th...The pressure characteristics inside single loop oscillating heat pipe （OHP） having 4.5 mm inner diameter copper tube with the loop height of 440 mm were addressed. Distilled water was used as working fluid inside the OHP with different filling ratios of 40%, 60% and 80% of total inside volume. Experimental results show that the thermal characteristics are significantly inter-related with pressure fluctuations as well as pressure frequency. And the pressure frequency also depends upon the evaporator temperature that is maintained in the range of 60-96 ℃. Piezoresistive absolute pressure sensor （Model-Kistler 4045A5） was used to take data. The investigation shows that the filling ratio of 60% gives the highest inside pressure magnitude at maximum number of pressure frequency at any of set evaporator temperature and the lowest heat flow resistance is achieved at 60% filling ratio.展开更多
The main objective of this paper is to develop a novel technology for combined generation of electricity and cold by using energy potential of transmission line＇s high pressure gas. For this purpose, the reduction of...The main objective of this paper is to develop a novel technology for combined generation of electricity and cold by using energy potential of transmission line＇s high pressure gas. For this purpose, the reduction of high pressure of the gas in gas distribution station instead of useless expansion throttling process is suggested to realize by adiabatic expansion, which is executed in a gas expanding turbine. Herewith, the gas distribution station is turned into energy and cold generating plant. Simultaneous operation of energy and cold generating plant is described. A method and appropriate formulas for determination of design characteristics of considered plant are suggested. A new method for reveres order of calculation and design of the cold store based on the use of expanded cold gas as cooling agent is developed. Calculations and analysis prove high energy efficiency of suggested technology, the wide use of which will provide significant production of cheap electricity and cold and as well as reduction of fossil fuel consumption.展开更多
文摘An asymmetry power clock,4 phase power clock supplying the power to the DSCRL(dual swing charge recovery logic) adiabatic circuit is presented.It is much simpler than the 6 phase power clock,symmetry power clock,used in the DSCRL adiabatic circuit.Although the 4 phase power clock is simpler,the DSCRL adiabatic circuit still shows good performance and high efficiency of energy transfer and recovery.This conclusion has been proved by the result of the HSPICE simulation using the 0 6μm CMOS technology.
文摘An IGBT subcircuit model is proposed and optimized,which is fully SPICE compatible.Based on analytical equations describing the semiconductor device physics,the model parameters are extracted accurately from the measured data without device destruction.The IGBT n - layer conductivity modulated resistor is effectively modeled as a voltage controlled resistor.The proposed model can be used to accurately predict the IGBT output I-V characteristics and low current gain etc.The simulation results are verified by the comparison with measurements and found to be in good agreement with them.The error in average is within 8%,which is better than the results of semi-mathematical models reported previously.
文摘Utilizing hybrid integration model.the integrated model optocouplers have successfully developed.The design,fabrication and characteristic parameters of the devices are presented.
基金Supported by the National Natural Science Foundation of China (No. 60273093)the Natural Science Foundation of Zhejinag Province(No. Y104135) the Student Sci-entific Research Foundation of Ningbo university (No.C38).
文摘First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.
基金Project(2011-0009022) supported by Basic Science Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education,Science and Technology of Korea
文摘The pressure characteristics inside single loop oscillating heat pipe （OHP） having 4.5 mm inner diameter copper tube with the loop height of 440 mm were addressed. Distilled water was used as working fluid inside the OHP with different filling ratios of 40%, 60% and 80% of total inside volume. Experimental results show that the thermal characteristics are significantly inter-related with pressure fluctuations as well as pressure frequency. And the pressure frequency also depends upon the evaporator temperature that is maintained in the range of 60-96 ℃. Piezoresistive absolute pressure sensor （Model-Kistler 4045A5） was used to take data. The investigation shows that the filling ratio of 60% gives the highest inside pressure magnitude at maximum number of pressure frequency at any of set evaporator temperature and the lowest heat flow resistance is achieved at 60% filling ratio.
文摘The main objective of this paper is to develop a novel technology for combined generation of electricity and cold by using energy potential of transmission line＇s high pressure gas. For this purpose, the reduction of high pressure of the gas in gas distribution station instead of useless expansion throttling process is suggested to realize by adiabatic expansion, which is executed in a gas expanding turbine. Herewith, the gas distribution station is turned into energy and cold generating plant. Simultaneous operation of energy and cold generating plant is described. A method and appropriate formulas for determination of design characteristics of considered plant are suggested. A new method for reveres order of calculation and design of the cold store based on the use of expanded cold gas as cooling agent is developed. Calculations and analysis prove high energy efficiency of suggested technology, the wide use of which will provide significant production of cheap electricity and cold and as well as reduction of fossil fuel consumption.
