A new technology of treating molybdenum residues by simultaneous ultrafine milling and alkali leaching was put forward to recover molybdenum from metallurgical residues. The effects of residue size, milling time, soli...A new technology of treating molybdenum residues by simultaneous ultrafine milling and alkali leaching was put forward to recover molybdenum from metallurgical residues. The effects of residue size, milling time, solid content, n (Na 2CO 3)/ n (Mo) and slurry pH value on molybdenum leaching rate were investigated. The results indicate that a simpler process, lower slurry temperature, 50% shorter treating time, 60% decrease of Na 2CO 3 content and 15% increase of molybdenum leaching rate can be obtained by the new technology compared with the traditional process. The leaching kinetic equation was determined, and calculation of active energy ( E =56.2 kJ/mol) shows that the leaching process of molybdenum residues by simultaneous ultrafine milling and alkali leaching is controlled by chemical reaction. Potential exists for the new process to form the basis for an economically viable, environmentally friendly process to recover valuable elements from residues.展开更多
Rooting ability of indole 3-butyric acid （IBA）-induced stem cuttings in vegetative regeneration experiments depends on various parameters, which can be entrenched using sprouting value index （SVI）, a mathematical ...Rooting ability of indole 3-butyric acid （IBA）-induced stem cuttings in vegetative regeneration experiments depends on various parameters, which can be entrenched using sprouting value index （SVI）, a mathematical approach. In this study, field studies were carried out in Tabebuia rosea to generate clonal planting stock regeneration using three rooting medium at a location in Central Kerala, Peninsular India, for three consecutive years from October 2014 till June 2016 at four months regular intervals. Three IBA concentrations, viz., 200, 500 and 1,000 ppm, have been used and the data obtained was evaluated using SVI method in order to establish the suitable medium, which gives the maximum rooting results. Control cuttings did not record rooting in any of the trials. The high SVI was obtained when stem root cuttings planted in root trainers with coir pith compost （RTCP） for all the three concentration of IBA applied. Sprouting percentage was marked up and the delay in completion of sprouting/rooting initiation decreased by the use of IBA treatment.展开更多
文摘A new technology of treating molybdenum residues by simultaneous ultrafine milling and alkali leaching was put forward to recover molybdenum from metallurgical residues. The effects of residue size, milling time, solid content, n (Na 2CO 3)/ n (Mo) and slurry pH value on molybdenum leaching rate were investigated. The results indicate that a simpler process, lower slurry temperature, 50% shorter treating time, 60% decrease of Na 2CO 3 content and 15% increase of molybdenum leaching rate can be obtained by the new technology compared with the traditional process. The leaching kinetic equation was determined, and calculation of active energy ( E =56.2 kJ/mol) shows that the leaching process of molybdenum residues by simultaneous ultrafine milling and alkali leaching is controlled by chemical reaction. Potential exists for the new process to form the basis for an economically viable, environmentally friendly process to recover valuable elements from residues.
文摘Rooting ability of indole 3-butyric acid （IBA）-induced stem cuttings in vegetative regeneration experiments depends on various parameters, which can be entrenched using sprouting value index （SVI）, a mathematical approach. In this study, field studies were carried out in Tabebuia rosea to generate clonal planting stock regeneration using three rooting medium at a location in Central Kerala, Peninsular India, for three consecutive years from October 2014 till June 2016 at four months regular intervals. Three IBA concentrations, viz., 200, 500 and 1,000 ppm, have been used and the data obtained was evaluated using SVI method in order to establish the suitable medium, which gives the maximum rooting results. Control cuttings did not record rooting in any of the trials. The high SVI was obtained when stem root cuttings planted in root trainers with coir pith compost （RTCP） for all the three concentration of IBA applied. Sprouting percentage was marked up and the delay in completion of sprouting/rooting initiation decreased by the use of IBA treatment.
