定综片数小提花多臂组织设计方法与CAD实现

为简化复杂小提花多臂织物组织设计,提出一种基于图像处理的,适用于确定综片数和不同经纬循环数的计算机智能化设计方法,可将复杂图像直接应用于多臂织物组织的设计中。通过深入分析多臂织物组织的形成原理,将多臂织物组织的穿综图、纹板图以及组织图转化为对应的组织矩阵,根据提出的优化综片数的数学模型,在指定综片数内生成适合多臂织机织造的上机图。对优化综片数前后的织物组织进行比较可知,图像基本一致,没有发生明显的变化。并用VB语言编程实现了CAD设计。

造纸成形网的编织方法与脱水成形性能的关系

介绍了造纸成形网的编织方法,并从纺织学的角度剖析了造纸成形网编织方法的优劣与脱水成形性能的关系。

基于图像处理的复杂多臂组织智能化设计方法

为简化复杂多臂织物组织设计,采用一种基于图像处理的适用于不同综片数、不同经纬循环数的计算机智能化设计方法,可将复杂图像直接应用于多臂织物组织的设计中。对用户自行选择的图像进行处理,转变为二值图像后确定织物的经纬循环数,根据多臂织物组织的穿综图、纹板图及组织图之间的数学关系,利用计算机智能化设计的模型及算法,优化综片数(将综片数控制在22片之内),生成适合多臂机织造的上机图。将优化综片数前后的织物组织进行比较可知,图像基本一致,没有发生明显的变化。

Mathematical Definitions of Operators for Cartographic Generalization

This paper puts forword 11 cartographic generalization operator models and introduces their mathematical definitions,and thus a precise mathematical form and quantitative description has been given to these formerly limited qualitative concepts.The meaning of mathematical definition of operators for cartographic generalization and the application prospect in computer_aided cartography (CAC) is stated.ract The Jurassic strata in Jingyan of Sichuan containing the Mamenchinsaurus fauna are dealt with and divided in this paper. The Mamenchisaurus fossils contained there are compared in morphological features and stratigraphically with other types of the genus on by one. The comprehensive analysis show that the Mamenchisaurus fauna of Jingyan appeared in the early Late Jurassic and is primitive in morphology. The results of the morphological identification and stratigraphical study agree with each other. Their evolutionary processes in different apoches of the Late Jurassic also made clear. Key words Jingyan, Sichuan, Mamenchisaurus Fauna, stratigraphy, evolution

Comparative Advantage of Maize Production in Jilin Province

The comparative advantage of maize production in Jilin Province was analyzed based on the sow area index,unit yield index,benefit index and comprehensive comparative advantage index in this study.The results showed that compared with other provinces in China,there was obvious comparative advantage in sow area index and unit yield index of maize in Jilin,the average of which stood for the first and the fourth in China from 2002 to 2006;there was no comparative advantage of benefit index compared with the average value of the whole countries,the average of which stood for the 14th in China from 2002 to 2006;the comprehensive comparative advantage in Jilin provincial maize production showed significant comparative advantage,the average of which stood for the fourth in China from 2002 to 2006.On the basis of the above,the suggestions to develop maize production in Jilin province had been put forward.

A new method to construct reservoir capillary pressure curves using NMR log data and its application

By analyzing hundreds of capillary pressure curves, the controlling factors of shape and type of capillary pressure curves are found and a novel method is presented to construct capillary pressure curves by using reservoir permeability and a synthesized index. The accuracy of this new method is verified by mercury-injection experiments. Considering the limited quantity of capillary pressure data, a new method is developed to extract the Swanson parameter from the NMR T2 distribution and estimate reservoir permeability. Integrating with NMR total porosity, reservoir capillary pressure curves can be constructed to evaluate reservoir pore structure in the intervals with NMR log data. An in-situ example of evaluating reservoir pore structure using the capillary pressure curves by this new method is presented. The result shows that it accurately detects the change in reservoir pore structure as a function of depth.

PROCESSING PARAMETER OPTIMIZATION OF FDM BASED ON ROBUST DESIGN

The influence of processing parameters on the precision of parts fabricated by fused deposition modeling （FDM） technology is studied based on a series of performed experiments. Processing parameters of FDM in terms of wire-width compensation, extrusion velocity, filing velocity, and layer thickness are chosen as the control fac- tors. Robust design analysis and multi-index fuzzy comprehensive assessment method are used to obtain the opti- mal parameters. Results show that the influencing degrees of these four factors on the precision of as-processed parts are different. The optimizations of individual parameters and their combined effects are of the same impor- tance for a high precision manufacturing.

Study on Urban Construction Land Suitability Evaluation in Southwestern Mountainous Areas of Yunnan Province Based on the Strategy of "Protecting Farmland in Flatland Areas and Constructing Mountainous Cities" : A Case in Lianghe County

According to the particularity of towns＇ construction in the southwestern mountainous areas of Yunnan Province, this study has built constructive land suit- ability evaluation index system which is different to flat area. Then this study deter- mined single evaluation factors index and comprehensive suitability index using ＂ex- treme conditions method＂ and ＂suitability index method＂, and analyzed and assessed the constructive land suitability on each evaluation unit polygons and its suitability level by using GIS software. Taking Lianghe County of Dehong Dai-Jingpo Au- tonomous Prefecture as an example to evaluate land suitability in Lianghe County＇s main towns around the gentle slope, the results show, in the evaluation area, the area of land suitable for construction and unsuitable for construction respectively ac- count 73.58% and 26.42%. And first-class, second and third-class of land suitable for construction should be composited at the ratio of about 11：49：40. The suitability evaluation index system and method developed in this paper is applicable for evalu- ating the construction land suitability in mountainous areas of southwest Yunnan Province, and will provide theoretical and technical support for land policy measures which strengthen the protection of farmland and promote the scientific development of urbanization in Yunnan Province and even similar mountainous areas of the whole China.

Digital Ocean Information Framework of China and its application in the international marine cooperation

Digital Ocean Information Framework （DOIF） has been proposed by China in 2011 based on the achievements of the comprehensive offshore oceanic surveys supported by Chinese Offshore Investigation and Assessment Program, whose code name is 908. All observations from the surveys have been integrated and managed by DOIF. DOIF is capable of supporting the decision of making process for the sustainable use of marine resources in coastal regions of China, providing useful information and added value products as well as services for the improved management of the coastal areas in China with high business impact on the targeted groups as public authorities and commercial operators （e.g. managers, fishermen, shipping companies）. The future vision of DOIF in the international marine data and information exchange and service at Western Pacific region is presented in this paper.

Comprehensive evaluation of water quality parameters in Tianjin Dagu Dainage Canal

In this paper, some indices of sulfide, organic carbon, oil and heavy metals （copper, lead, zinc, cadmium, mercury, arsenic and chromium） in the sediments from Dagu Dainage Canal at the Bohai Bay during four seasons in 2012 - 2013 are selected, and Water Quality Pollution Index （API） is applied to evaluate water quality indices, aiming for the systematic evaluation of the water quality of Dagu Dainage Canal. The results showed that four stations of D3, D6, D7and D9 for S2 had the type Ⅱand Ⅲ of water; others had the type Ⅰ ; the total level of TOC, TPH, Cu, Pb, Zn, Cd, Hg, As and Cr were type Ⅰ, Ⅳ, Ⅱ, Ⅴ, Ⅱ, Ⅴ, Ⅲ, Vand Ⅴ. Water Quality Pollution Index （API） was 3.28, which illustrated Dagu Dainage Canal was in the state of contamination and the degree of pollution exceeded the standard functional areas.

Chemical Property Variation Trend Analysis and Quality Evaluation of Water in Wei River

[Objective] Water quality variation trend of Wei River was analyzed and the water quality evaluation was performed in this study. [Method] Stationing and water sampling were conducted along Wei River at three different sites during the 12 months from January to December of 2014, the water samples were pre-treated and analyzed on chemical pollution indexes with the national standard, water quality data of Wei River in the 12 months was processed with periodic time series method, Spearman rank correlation coefficient was adopted to test pollution changing trend, and water quality status of Wei water was evaluated with integrated index of organic pollution. [Result] NH3-N and TN of Wei River exceeded the standard＇s lim- its; [ Y~ [ 〉Wp=0.506, [ Yss~ [ 〉Wp=0.506 and [ Y＆=0~,, Diecqieo 〉Wp=0.506 indicated that the integrated index of organic pollution of Shawangdu section, S.huyuan section and Tongguan Diaoqiao section showed a significant downtrend, respetively; and the water quality of the three sections became better, and it was worth noting that it was necessary to strengthen the water quality control of Wei River from January to June, so as to ensure that the water quality of Wei River reached the standard all the time. [Cendasien] This research was of significance in improving water ecological environment in Weinan as well as rationally utilizing water resources and finally realizing permanent development. Key words Wei River; Water quality variation trend; Integrated index of organic pollution; Evaluation

Investigation of Dominant Populations of Late-summer Phytoplankton and Comprehensive Nutritional Evaluation of Water Quality in Bailang Lake

[Objective] This study aimed to investigate the dominant populations of late-summer phytoplankton and conduct comprehensive nutritional evaluation of water quality in Bailang Lake. [Method] A series of water quality survey and phytoplankton sampling was conducted in Bailang Lake in September 2011, a total of four sam- pling points were set, to detect and analyze the total nitrogen, total phosphorus, ammonia nitrogen, nitrite nitrogen, nitrate nitrogen and permanganate index in water samples and further conduct comprehensive nutritional evaluation of the water quality factors using comprehensive nutritional state index method. [Result] Water in Bailang Lake was neutral to slightly alkaline with pH of 8.57. The average water trans- parency was 0.4 m, with relatively high content of dissolved oxygen. The content of total nitrogen was relatively high of 3.043 mg/L averagely. Comprehensive nutritional evaluation showed that the water quality of Bailang Lake belonged to moderate eu- trophication. As can be seen from various comprehensive nutritional state indices TLI, the contribution of transparency, chlorophyll a and total nitrogen to the eutrophi- cation in Bailang Lake was the greatest, followed by the permanganate index and total phosphorus. Statistical analysis showed that the average weight-biomass of phy- toplankton in Bailang Lake was 6.442 mg/L, and the average was 146.46x104 individuals/ml. There were eight dominant species in Bailang Lake, including Scenedesmus, Tetraedron, Merismopedia sinica, Phormidium, Merismopedia, Tribonema, Chroomonas and Synedra. [Conclusion] This study provided data informa- tion for the environmental protection and fisheries production in Bailang Lake.

Spatial pattern of dominant tree species of the secondary monsoon rain forest in Lianjiang, Guangdong Province

Based on the summed dominance ratios of species in sample plots, the first three dominant species (Litchi chinensis, Elaeocarpus sylvestris and Canarium album) of the secondary monsoon rain forest of Mt. Royal Shoe in Lianjiang City, western Guangdong, were chosen for analyzing their spatial distribution pattern with the analysis methods such as frequency models of Poisson Distribution, Two Negative Items Distribution, Neyman Distribution, aggregate indexes, Taylor exponential equation and Iwao’s equation modeling. The results showed that these three species distributed in the congregate spatial pattern. Litchi chinensis and Elaeocarpus sylvestris had the characteristic of basic congregate population and attractive characteristic between their plants. The patterns for Canarium album may change and become more evenly distributed with the increase of density. The overall species spatial pattern also depended on the conservation of the secondary monsoon rain forest besides it was affected by the species reproduction characteristics and its growing environment. The congregate spatial patterns of three dominant species showed that it is important to conserve forest urgent conservation of the forest.

Combined Selection Index for New Yorkshire Dam Line with High Prolificacy

The combined selection index used in the breeding of new Yorkshire dam line with high prolificacy according to breeding objects was formulated as /：2.272E- BVNB-0.056EBVDAYS. After 5 generations breeding, the two main selected traits such as total number of born and age at 100 kg weight was 12.17 piglets/litter and 165.18 d, respectively. The genetic improvements per generates was 0.156 and -2.198, respec- tively. The breeding objects of the new Yorkshire dam line with high prolificacy were basically reached. It indicated that the methods and index could be used in pig breeding.

0.18μm CMOS programmable frequency divider design for DVB-T

The implementation of a programmable frequency divider, which is one of the components of the phase-locked loop （PLL） frequency synthesizer for digital video broadcastingterrestrial （DVB-T） and other modem communication systems, is presented. By cooperating with a dual-modulus prescaler, this divider can realize an integer frequency division from 926 to 1 387. Besides the traditional standard cell design flow, such as logic synthesis, placement and routing, the interactions between front-end and back-end are also considered to optimize the design flow under deep submicron technology. By back-annotating the back-end information to front-end design, a custom wire-load model is created which is more practical compared with the default model. This divider has been fabricated in TSMC 0. 18μm CMOS technology using Artisan standard cell library. The chip area is 675 μm × 475 μm and the power consumption is about 2 mW under a 1.8 V power supply. Measurement results show that it works correctly and can realize a frequency division with high precision.

Watershed Prioritization of Palar Sub-watershed Based on the Morphometric and Land Use Analysis

Morphometric analysis is an indispensable tool for hydrological investigation that involves the development and management of drainage basin. This study characterizes the micro watersheds in the Palar sub-watershed using morphometric analysis and assesses its risk by land use and land cover features in a particular micro watershed. Palar sub-watershed is divided into 6 micro watersheds for prioritization based on morphometric and land use analysis. Several morphometric parameters （linear, shape and relief） are determined from the drainage map; ranks are assigned based on their capacity to induce erodability and degradation. Final ranking is based on the composite index calculated from the sum of the ranks of each morphometric parameter. Morphometric analysis reveals micro watersheds 5 and 6 as most susceptible and 2 and 3 as low susceptible. Land use is mapped using IRS ID LISS III satellite data. The risk in terms of watershed degradation involved to each micro watershed is based on the ranks of each land use feature, obtained from a similar composite index as that of morphometric analysis. Land use analysis shows that micro watersheds 2 and 4 fall under high priority category while 5 and 6 under low priority category. Integration of the morphometric and land use analysis shows that only microwatershed 1 falls under the same category in both analyses. Control measures are suggested to contain degradation depending on its specific land use pattern and morphometric features. This study ean be used to prepare a comprehensive watershed plan for the development or for planning resource conservation strategies, by integrating land use features with the drainage characteristics of the region, in particular for a hill ecosystem as the prioritization is at micro level.

A Survey on the Privacy-Preserving Data Aggregation in Wireless Sensor Networks

Wireless sensor networks(WSNs)consist of a great deal of sensor nodes with limited power,computation,storage,sensing and communication capabilities.Data aggregation is a very important technique,which is designed to substantially reduce the communication overhead and energy expenditure of sensor node during the process of data collection in a WSNs.However,privacy-preservation is more challenging especially in data aggregation,where the aggregators need to perform some aggregation operations on sensing data it received.We present a state-of-the art survey of privacy-preserving data aggregation in WSNs.At first,we classify the existing privacy-preserving data aggregation schemes into different categories by the core privacy-preserving techniques used in each scheme.And then compare and contrast different algorithms on the basis of performance measures such as the privacy protection ability,communication consumption,power consumption and data accuracy etc.Furthermore,based on the existing work,we also discuss a number of open issues which may intrigue the interest of researchers for future work.

A METHODOLOGY FOR INTEGRATED MANAGEMENT SYSTEM

ISO 9000 certification has been considered as an effective competitive edge for manufacturing industries. In Hong Kong, the ISO 9000 certification has been widely adopted and extended to service industries for the sole purpose of enhancing corporate image. However, complaints have been voiced by many certified organizations about increasing paperwork, non direct labour and excessive resources channelled into non core business. This paper is to propound the integrated management system, a single management system focusing on business purpose yet being flexible enough to integrate the requirements of various management standards such as the ISO 9000, ISO 14000 and future ISO 18000. This paper describes how the proposed system could be implemented to achieve the desired business results.

A new approach for selecting best development face ventilation mode based on G1-coefficient of variation method

The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper presents a new approach to rank the alternatives by G1-coefficient of variation method.The focus of this approach is the use of the combination weighing,which is able to compensate for the deficiencies in the method of evaluation index single weighing.In the case study,an appropriate evaluation index system was established to determine the evaluation value of each ventilation mode.Then the proposed approach was used to select the best development face ventilation mode.The result shows that the proposed approach is able to rank the alternative development face ventilation mode reasonably,the combination weighing method had the advantages of both subjective and objective weighing methods in that it took into consideration of both the experience and wisdom of experts,and the new changes in objective conditions.This approach provides a more reasonable and reliable procedure to analyse and evaluate different ventilation modes.