The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spe...The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spectroscopy and chronoamperometry measurements. All electrochemical measurements suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25 °C to 65 °C. It is found that the adsorption of this inhibitor follows the Langmuir adsorption isotherms. The value of activation energy and the thermodynamic parameters such as ΔHads, ΔSads, Kads and ΔGads were calculated by the corrosion currents at different temperatures using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of inhibitor was examined by scanning electron microscopy(SEM) images.展开更多
Veratraldehyde was tested as a corrosion inhibitor for mild steel in I M HCI and 0.5 M H2SO4 separately using mass loss and electrochemical studies. The inhibition efficiencies were evaluated at different concentratio...Veratraldehyde was tested as a corrosion inhibitor for mild steel in I M HCI and 0.5 M H2SO4 separately using mass loss and electrochemical studies. The inhibition efficiencies were evaluated at different concentrations of the inhibitor at different temperatures. The inhibition efficiency increased with increase in inhibitor concentration and decreased with increase in temperature in both the acid solutions. Electrochemical studies showed that the inhibitor is of mixed type with a slight predominance of anodic character. The inhibitor was more active in HCI than in H2SO4. The maximum inhibition efficiency approached at 1000 ppm in both the acid medium. The inhibitor was found to adsorb on the mild steel surface according to the Langmuir adsorption isotherm. The surface morphology of mild steel in the presence and absence of inhibitor was studied by using scanning electron microscopic （SEM） images.展开更多
The waste fiuorgypsum was modified and applied as a cement retarder. The main chemical composition and mineral structure of the waste fluorgypsum were analyzed. Scanning electron microscopy （SEM） and eight-channel m...The waste fiuorgypsum was modified and applied as a cement retarder. The main chemical composition and mineral structure of the waste fluorgypsum were analyzed. Scanning electron microscopy （SEM） and eight-channel micro-calorimeter （TAM Air） were employed to analyze the changes in morphology and study the application performance of the modified fluorgypsum, respectively. Experimental results indicate that the flexural strength and compressive strength of the modified fiuorgypsurn are roughly equal to those of the natural gypsum. The morphology of the crystal of the fiuorgypsum changes from block particle into trimetric short column. The fluorgypsum crystals stagger mutually and improve the strength of the hardened body. The modified fluorgypsum as cement retarder could delay the hydration, reduce the heat of the hydration and make the setting time, volume stability, and the S03 content of the cement meet the national standards. The modified fluorgypsum is a good substitute for the natural gypsum.展开更多
Bacterial EPSs （exopolysaccharides） are believed to play an important role in the environment by promoting survival strategies such as bacterial attachment to surfaces and nutrient trapping, which facilitate process...Bacterial EPSs （exopolysaccharides） are believed to play an important role in the environment by promoting survival strategies such as bacterial attachment to surfaces and nutrient trapping, which facilitate processes of biofilm formation and development. These microbial biofilms have been implicated in corrosion of metals, bacterial attachment to prosthetic devices, fouling of heat exchange surfaces, toxicant immobilization, and fouling of ship hulls. In this paper, data on EPS production and the effect of EPS on corrosion of steel produced by Lactobacillus fermentum Ts are presented and discussed. The Lactobacillus fermentum Ts strain was isolated from types of Bulgarian rye flour. It was tested for its ability to produce exopolysaccharides when cultivated in a media containing 10% sucrose, 10% fructose and 10% maltose. The study of the corrosive stability of steel samples was conducted on the gravimetrique method. The rate of corrosion, the degree of protection, and coefficient of protection have been calculated. The structure of layer over steel plates was analysed by SEM （scanning electron microscopy） JSM 5510. It could be underlined that 10% sucrose and 10% maltose in the media stimulated the process of protection of corrosion.展开更多
文摘The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spectroscopy and chronoamperometry measurements. All electrochemical measurements suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25 °C to 65 °C. It is found that the adsorption of this inhibitor follows the Langmuir adsorption isotherms. The value of activation energy and the thermodynamic parameters such as ΔHads, ΔSads, Kads and ΔGads were calculated by the corrosion currents at different temperatures using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of inhibitor was examined by scanning electron microscopy(SEM) images.
文摘Veratraldehyde was tested as a corrosion inhibitor for mild steel in I M HCI and 0.5 M H2SO4 separately using mass loss and electrochemical studies. The inhibition efficiencies were evaluated at different concentrations of the inhibitor at different temperatures. The inhibition efficiency increased with increase in inhibitor concentration and decreased with increase in temperature in both the acid solutions. Electrochemical studies showed that the inhibitor is of mixed type with a slight predominance of anodic character. The inhibitor was more active in HCI than in H2SO4. The maximum inhibition efficiency approached at 1000 ppm in both the acid medium. The inhibitor was found to adsorb on the mild steel surface according to the Langmuir adsorption isotherm. The surface morphology of mild steel in the presence and absence of inhibitor was studied by using scanning electron microscopic （SEM） images.
基金Project(21003014) supported by the National Natural Science Foundation of ChinaProject(2010FJ3167) supported by the Hunan Provincial Science and Technology Program,ChinaProject(K1104029-11) supported by the Changsha IT Project
文摘The waste fiuorgypsum was modified and applied as a cement retarder. The main chemical composition and mineral structure of the waste fluorgypsum were analyzed. Scanning electron microscopy （SEM） and eight-channel micro-calorimeter （TAM Air） were employed to analyze the changes in morphology and study the application performance of the modified fluorgypsum, respectively. Experimental results indicate that the flexural strength and compressive strength of the modified fiuorgypsurn are roughly equal to those of the natural gypsum. The morphology of the crystal of the fiuorgypsum changes from block particle into trimetric short column. The fluorgypsum crystals stagger mutually and improve the strength of the hardened body. The modified fluorgypsum as cement retarder could delay the hydration, reduce the heat of the hydration and make the setting time, volume stability, and the S03 content of the cement meet the national standards. The modified fluorgypsum is a good substitute for the natural gypsum.
文摘Bacterial EPSs （exopolysaccharides） are believed to play an important role in the environment by promoting survival strategies such as bacterial attachment to surfaces and nutrient trapping, which facilitate processes of biofilm formation and development. These microbial biofilms have been implicated in corrosion of metals, bacterial attachment to prosthetic devices, fouling of heat exchange surfaces, toxicant immobilization, and fouling of ship hulls. In this paper, data on EPS production and the effect of EPS on corrosion of steel produced by Lactobacillus fermentum Ts are presented and discussed. The Lactobacillus fermentum Ts strain was isolated from types of Bulgarian rye flour. It was tested for its ability to produce exopolysaccharides when cultivated in a media containing 10% sucrose, 10% fructose and 10% maltose. The study of the corrosive stability of steel samples was conducted on the gravimetrique method. The rate of corrosion, the degree of protection, and coefficient of protection have been calculated. The structure of layer over steel plates was analysed by SEM （scanning electron microscopy） JSM 5510. It could be underlined that 10% sucrose and 10% maltose in the media stimulated the process of protection of corrosion.
