The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rh...The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rheometer with parallel plates. The results show that the blend systems approach homogeneous state at 140, 150 and 160℃while the rheological properties of the blend systems significantly deviate from the homogeneous systems at 120℃. Shear thinning behavior is observed for all the blend systems at different temperatures and is enhanced by increasing Pluronic F127 content. The complex viscosity, storage modulus, loss modulus, zero-shear activation energy and flow recovery of the blend systems increase with the increase of Pluronic F127 content. There is a crossing point for the loss modulus and the storage modulus of each sample at high frequency, which is called specified frequency （SF）. The loss modulus is larger than the storage modulus when the frequency is less than the SF, and when frequency is more than SF, the loss modulus is smaller than the storage modulus.展开更多
A novel copolymer network with acetal structure was prepared using bis[4-(vinyloxy)butyl](4-methyl-1,3-phenylene)biscarbamate(BECT)as the crosslinking agent.Firstly,a tri-copolymer of maleic anhydride(MAn),n-butyl vin...A novel copolymer network with acetal structure was prepared using bis[4-(vinyloxy)butyl](4-methyl-1,3-phenylene)biscarbamate(BECT)as the crosslinking agent.Firstly,a tri-copolymer of maleic anhydride(MAn),n-butyl vinyl ether(BVE)and 4-hydroxybutyl vinyl ether(HBVE)was synthesized via free-radical polymerization with 2,2′-azobisisobutyronitrile as the initiator.The tri-copolymer consisted of two sorts of alternating units,MAn-alt-BVE and MAn-alt-HBVE.The linear copolymer Poly((MAn-alt-BVE)-co-(MAn-alt-HBVE))with pending hydroxyl groups was then combined with BECT in the presence of pyridinium p-toluenesulfonate,generating a copolymer network comprising acetal components in the crosslinking segment. This polymer network exhibited degradation in acid conditions.展开更多
基金Project(20776161) supported by the National Natural Science Foundation of China
文摘The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rheometer with parallel plates. The results show that the blend systems approach homogeneous state at 140, 150 and 160℃while the rheological properties of the blend systems significantly deviate from the homogeneous systems at 120℃. Shear thinning behavior is observed for all the blend systems at different temperatures and is enhanced by increasing Pluronic F127 content. The complex viscosity, storage modulus, loss modulus, zero-shear activation energy and flow recovery of the blend systems increase with the increase of Pluronic F127 content. There is a crossing point for the loss modulus and the storage modulus of each sample at high frequency, which is called specified frequency （SF）. The loss modulus is larger than the storage modulus when the frequency is less than the SF, and when frequency is more than SF, the loss modulus is smaller than the storage modulus.
基金the support from Innovative Research Team in Universities (IRT0706)the Polymer Chemistry and Physics, Beijing Municipal Education Commission (XK100100640)
文摘A novel copolymer network with acetal structure was prepared using bis[4-(vinyloxy)butyl](4-methyl-1,3-phenylene)biscarbamate(BECT)as the crosslinking agent.Firstly,a tri-copolymer of maleic anhydride(MAn),n-butyl vinyl ether(BVE)and 4-hydroxybutyl vinyl ether(HBVE)was synthesized via free-radical polymerization with 2,2′-azobisisobutyronitrile as the initiator.The tri-copolymer consisted of two sorts of alternating units,MAn-alt-BVE and MAn-alt-HBVE.The linear copolymer Poly((MAn-alt-BVE)-co-(MAn-alt-HBVE))with pending hydroxyl groups was then combined with BECT in the presence of pyridinium p-toluenesulfonate,generating a copolymer network comprising acetal components in the crosslinking segment. This polymer network exhibited degradation in acid conditions.
