羽毛羽绒混样缩样检测方法的探讨

羽毛羽绒混样缩样是羽毛绒检测的前道工作,羽毛绒试验样品是否混合均匀性并具有代表性将直接影响后道检测项目数据的准确性。本文主要从国内外各个检测标准有关羽毛绒混样缩样的操作方法方面,对羽毛羽绒的混样缩样方法进行了分析与讨论。

年画缩样的出版发行与功能价值研究——以20世纪中叶到八九十年代为中心

年画缩样作为新年画运动背景下的特定历史产物,独具时代特色、艺术审美与功能价值,是中国年画发展史上重要的艺术表现形式之一。《在延安文艺座谈会上的讲话》为新年画运动发起做出了重要的精神指示,年画缩样作为对会议焦点问题的详细阐释,在年画发展中的历史价值被予以充分肯定。此外,计划经济时代下年画缩样作为商品所承载的强大经济功能,以及20世纪中叶到八九十年代对社会样态的真实体现,都是其除却艺术性与审美性之外的其他重要功能的集中体现。随着“非遗后”时代的来临,年画缩样为研究新时代年画发展历程提供了翔实样本与鲜活案例,同时为年画项目的传承与发展提供可资借鉴的经验。

GB/T 10288《羽绒羽毛检验方法》新老标准的比较

本文介绍了GB/T 10288《羽绒羽毛检验方法》2003版标准与2016年修订的新版标准之间的区别,对比分析了新老标准在实验室环境、抽样数量与抽样要求、匀样与缩样、检验项目及所需的数量、成分分析检验、蓬松度检验、耗氧量、浊度、残脂率、气味等测试方法几个方面的变化,指出新修订的标准更加符合实际、更加便于检测机构和企业的使用。通过两者之间的解读对比分析,旨在为新标准的有效实施及检测机构、企业更好地理解新标准提供一定的帮助。

Discrete-time Markov-based dynamic control approach for compressed sampling

To solve the problem that the signal sparsity level is time-varying and not known as a priori in most cases,a signal sparsity level prediction and optimal sampling rate determination scheme is proposed.The discrete-time Markov chain is used to model the signal sparsity level and analyze the transition between different states.According to the current state,the signal sparsity level state in the next sampling period and its probability are predicted.Furthermore,based on the prediction results,a dynamic control approach is proposed to find out the optimal sampling rate with the aim of maximizing the expected reward which considers both the energy consumption and the recovery accuracy.The proposed approach can balance the tradeoff between the energy consumption and the recovery accuracy.Simulation results show that the proposed dynamic control approach can significantly improve the sampling performance compared with the existing approach.

Gut hormones, and short bowel syndrome: The enigmatic role of glucagon-like peptide-2 in the regulation of intestinal adaptation

Short bowel syndrome （SBS） refers to the malabsorption of nutrients, water, and essential vitamins as a result of disease or surgical removal of parts of the small intestine. The most common reasons for removing part of the small intestine are due to surgical intervention for the treatment of either Crohn＇s disease or necrotizing enterocolitis. Intestinal adaptation following resection may take weeks to months to be achieved, thus nutritional support requires a variety of therapeutic measures, which include parenteral nutrition. Improper nutrition management can leave the SBS patient malnourished and/or dehydrated, which can be life threatening. The development of therapeutic strategies that reduce both the complications and medical costs associated with SBS/long-term parenteral nutrition while enhancing the intestinal adaptive response would be valuable. Currently, therapeutic options available for the treatment of SBS are limited. There are many potential stimulators of intestinal adaptation including peptide hormones, growth factors, and neuronally-derived components. Glucagon-like peptide-2 （GLP-2） is one potential treatment for gastrointestinal disorders associated with insufficient mucosal function. A significant body of evidence demonstrates that GLP-2 is atrophic hormone that plays an important role in controlling intestinal adaptation. Recent data from clinical trials demonstrate that GLP-2 is safe, well-tolerated, and promotes intestinal growth in SBS patients. However, the mechanism of action and the localization of the glucagon-like peptide-2 receptor （GLP-2R） remains an enigma. This review summarizes the role of a number of mucosal-derived factors that might be involved with intestinal adaptation processes; however, this discussion primarily examines the physiology, mechanism of action, and utility of GLP-2 in the regulation of intestinal mucosal growth.

Effect of amyloid peptides on serum withdrawal-induced cell differentiation and cell viability

Abnormal deposition of amyloid-p(Ap) peptides and formation of neuritic plaques are recognized as pathological processes in Alzheimer's disease (AD) brain. By using amyloid precursor protein (APP) transfected cells, this study aims to investigate the effect of overproduction of Aβ on cell differentiation and cell viability. It was shown that after serum withdrawal, untransfected cell (N2a/Wt) and vector transfected cells (N2a/vector) extended long and branched cell processes, whereas no neurites was induced in wild type APP (N2a/APP695) and Swedish mutant APP (N2a/ APPswe) transfected N2a cells. After differentiation by serum withdrawal, the localization of APP/AP and neurofilament was extended to neurites, whereas those of APP-transfected cells were stillrestricted within the cell body. Levels of both APP and Aβ were significantly higher in N2a/APP695 and N2a/APPswe than in N2a/Wt, as determined by Western blot and Sandwich ELISA, respectively. To further investigate the effect of A0 on the inhibition of cell differentiation, we added exogenously the similar level or about 10-times of the AP level produced by N2a/APP695 and N2a/APPswe to the culture medium and co-cultured with N2a/Wt for 12 h, and we found that the inhibition of serum withdrawal-induced differentiation observed in N2a/APP695 and N2a/APPswe could not be reproduced by exogenous administration of AP into N2a/Wt. We also observed that neither endogenous production nor exogenous addition of Aβ1-40 or Aβ1-42, even to hundreds fold of the physiological concentration, affected obviously the cell viability. These results suggest that the overproduction of AP could not arrest cell differentiation induced by serum deprivation and that, at least to a certain degree and in a limited time period, is not toxic to cell viability.

Mechanical behavior and failure analysis of brittle sandstone specimens containing combined flaws under uniaxial compression

Based on the axial stress-axial strain curves,the effect of fissure angle on the strength and deformation behavior of sandstone specimens containing combined flaws is analyzed.The mechanical parameters of sandstone specimens containing combined flaws are all lower than that of intact specimen,but the reduction extent is distinctly related to the fissure angle.The results of sandstone specimens containing combined flaws are obtained by the acoustic emission,which can be used to monitor the crack initiation and propagation.The ultimate failure mode and crack coalescence behavior are evaluated for brittle sandstone specimens containing combined flaws.Nine different crack types are identified on the basis of their geometry and crack coalescence mechanism(tensile crack,hole collapse,far-field crack and surface spalling)for combined flaws.The photographic monitoring was also adopted for uniaxial compression test in order to confirm the sequence of crack coalescence in brittle sandstone specimens containing combined flaws,which recorded the real-time crack coalescence process during entire deformation.According to the monitored results,the effect of crack coalescence process on the strength and deformation behavior is investigated based on a detailed analysis for brittle sandstone specimens containing combined flaws by using digital photogrammetry.

Triaxial mechanical creep behavior of sandstone

Based on laboratory results of time-dependent mechanical behavior tests,we investigated short-term and mechanical creep behavior of sandstone,observed in conventional triaxial compression experiments at room temperature,using a servo-controlled rheology testing machine.Given our short-term experimental test results,we confirmed deviatoric creep stress levels of sandstone.Multiple deviatoric stress levels were applied in steps to each sample.Each deviatoric stress level before the final failed deviatoric stress was maintained for 48 h or longer.Time-dependent variations of axial strains of sandstone samples are discussed and evaluated.During the creep tests,complete tertiary creep curves of sandstone were observed under failed deviatoric stress levels with different confining pressures.Slices of coal in sandstone samples can lead to distinct tertiary creep deformation failure.

Variations of bacterial and fungal communities along a primary successional chronosequence in the Hailuogou glacier retreat area(Gongga Mountain, SW China)

New terrestrial habitats have emerged and a primary succession has developed in the retreat area （29°34＇N, 102°oo＇E, 2951-2886 m） after the retreat of the Hailuogou glacier. To investigate soil microbial changes along the primary successional chronosequence, mixed soil samples were collected at six sites at different ages （2 young sites, 2 mid-aged sites, and 2 old sites）. The RNA was extracted and amplified. Bacterial 16S rRNA and fungal 18S rRNA were analyzed using high-throughput 454 pyrosequencing analysis. Overall, pyrosequeneing showed that Proteobacteria, Acidobacteria, Baeteroidetes and Actinobacteria were the main bacterial phyla, and the fungal communities were strongly dominated by the phyla Ascomyeota and Basidiomyeota in the retreat area. The Shannon diversity index （Hshannon） of bacteria was 6.5 - 7.9, and that of fungi was 2.2 - 4.1 in these sites. For the bacterial communities, diversity and evenness values were highest on the mid-age sites and were relatively low on the young trend was observed for the and old sites. A similar fungal communities. In contrast, soil properties showed significant linear distributional trends （increase or decrease） with the age of the site. Combining the linear change patterns of soil properties, the highest values of bacterial and fungal evenness and diversity in the mid-aged sites indicated that there was less environmental stress and more niches for microbial communities in the middle successional stage compare with other stages. In addition, our analysis showed that microbial communities were the main drivers that build a soil organic matter pool to expedite pedogenesis for ecosystem succession. This primary succession in the Hailuogou glacier retreat area is developing rapidly compared with that in other glacier retreats.

A Takagi-Sugeno-Kang (TSK) Power Model Using Compressed-sensing Sampling

More and more information are needed in social life and commercial production, causing significant pressure on the sampling and too much time spent on signal sampling. Compressed sensing is one emerging hotspot in signal processing which employs a special sampling method to capture and represent compressible signals at a rate significantly below the Nyquist rate. In this paper, a Takagi-Sugeno-Kang (TSK) Model based on compressed-sensing sampling theorem is proposed for grinding power. It is further tested by using the actual production data, and the algorithm performance in grinding power model is also analyzed. The experiments show the validity and effectiveness of the proposed modeling method and its bright application foreground in other fields with similar features, such as power, metallurgy and so on.

High Performance Compressed Sampling for OFDM-UWB Systems

In order to solve the problem of high-speed sampling in OFDM based ultra wide band(UWB) systems, this paper first gives analysis on the applicability of existing compressed sampling methods. Then, on the basis of an established segmented observation model, it presents an optimized parallel segmented compressed sampling(OPSCS) scheme based on Hadamard matrix. The orthogonal Hadamard matrix is adopted to construct the segmented measurement matrix with any dimensions, thus orthogonal or quasi-orthogonal multiplex observation sequences are obtained, and the restricted isometry property is improved. The optimized orthogonal matching pursuit algorithm is also used for the known sparsity avoiding iterative operation. Researches show that the proposed method can effectively reduce the sampling rate in OFDM-UWB systems, and also has a good ability of noise resisting that it achieves a high system performance better than the existing schemes of compressed sampling and even Nyquist rate sampling.

Size effect on cubic and prismatic compressive strength of cement paste

A series of compression tests were conducted on 150 groups of cement paste specimens with side lengths ranging from 40 mm to 200 mm. The specimens include cube specimens and prism specimens with height to width ratio of 2. The experiment results show that size effect exists in the cubic compressive strength and prismatic compressive strength of the cement paste, and larger specimens resist less in terms of strength than smaller ones. The cubic compressive strength and the prismatic compressive strength of the specimens with side length of 200 mm are respectively about 91% and 89% of the compressive strength of the specimens with the side length of 40 mm. Water to binder ratio has a significant influence on the size effect of the compressive strengths of the cement paste. With a decrease in the water to binder ratio, the size effect is significantly enhanced. When the water to binder ratio is 0.2, the size effects of the cubic compressive strength and the prismatic compressive strength of the cement paste are 1.6 and 1.4 times stronger than those of a water to binder ratio of 0.6. Furthermore, a series of formulas are proposed to calculate the size effect of the cubic compressive strength and the prismatic compressive strength of cement paste, and the results of the size effect predicted by the formulas are in good agreement with the experiment results.

Permissible Stress Level of Brick Masonry under Compressive Cyclic Loading

Laboratory tests revealed that the behavior of brick masonry under compressive cyclic loading is characterized by three distinct stress-strain curves. These three curves are termed as envelope curve, common point curve and stability point curve. The envelope curve is obtained by superimposing the cyclic peaks on the monotonic stress-strain curve. The common point curve is the locus of intersection points of loading and unloading curves of the cycles. If for the same cycle, the loading and unloading are repeated several times, the intersection points of loading and unloading paths will stabilize at a lower bound. The locus of these stabilized points （lower bound points） of all cycles form the stability point curve. Therefore, the stability point curve can be used as a measure for the allowable stress for masonry under cyclic loadings. The proposed cyclic allowable stress level is associated with the accumulation of residual （plastic） strain levels as a result of cyclic loading history. The permissible stress level was found to be about two thirds of the cyclic peak stress of the specimen.

Failure mode and strength anisotropic characteristic of stratified rock mass under uniaxial compressive situation

A stratified rock mass model was founded by FLAC^3D. The failure mode and anisotropic characteristic of strength for stratified rock mass were analyzed. The analysis results show that the numerical simulation can visually reflect the failure modes of rock samples under different inclination angles β of structural plane. The stiffness of rock sample before peak strength changes in the compressive procedure. With the increase of β, the compressive strength σc of rock sample decreases firstly and then increases; when β is in the range of 20°-30° and 80°-90°, σc has the largest sensitivity to r; while β falls in the range of 30°-70°, σc varies little. When φj〈β〈90° （ φj is friction angle of structure plane）, the results obtained from numerical simulation and theoretical analysis are in almost the same values; while β〈 φj or β=90°, they are in great different values. The results obtained from theoretical analysis are obvious larger than those from numerical simulation; and the results from numerical simulation can reflect the difference of compressive strength of rock samples for the two situations of β≥φj and β=90°, which is in more accordance with the real situation.

A Design of Acoustic Signal Wireless Acquisition System for Stored Grain Pests Based on Compressed Sensing

In order to achieve the acoustic signal distributed acquisition of stored grain pests, a novel acoustic signal acquisition system was presented based on the wireless sensor networks. And the system architecture, hardware configuration, and software were introduced in detail. Considering bandwidth limitation of wireless sensor networks, random sampling algorithm based on the compressed sensing theory was proposed. The developed acoustic signal acquisition system was applied in sampling the crawl acoustic signal of Tribolinm castaneum Herbst adults in granary. Preliminary experimentation indicated the rationality and practicability of the developed system and the proposed algorithm. They can implement the remote, real-time, and reliable wireless transmission for the acoustic signal sampled data of multiple points stored grain pests effectively.

Deformation characteristics and constitutive model of seafloor massive sulfides

Deformation characteristics and constitutive model of seafloor massive sulfide(SMS)were selected as the research object.Uniaxial/triaxial compression test were carried out on the mineral samples,and the deformation characteristics of specimens under various conditions were studied.According to characteristics of the mineral,a new three stages constitutive equation was proposed.The conclusions are as follows:The axial strain,peak strain and maximum strength of seafloor massive sulfide increase with the confining pressure.The elastic modulus of the metal sulfide samples is decreased sharply with the increase of confining pressure.According to characteristics of seafloor massive sulfide,the constitutive equation is divided into three parts,the comparison between theoretical curves and experimental data shows that both of them are in good agreement,which also proves the correctness of the constitutive equation for uniaxial compression.

一位家庭医生的一天

我诊所的一个同事那天值班，那天下班后急诊看了一个摔倒在地并且右侧手掌先触地的12岁男孩。患者有右手腕疼痛，但没有发现明显肿胀。当即拍了X线，但没有阳性发现。2天后，病人仍有疼痛，因此来到我的诊所让我看病。

Principles and applications of high-speed single-pixel imaging technology

Single-pixel imaging （SPI） technology has garnered great interest within the last decade because of its ability to record high-resolution images using a single-pixel detector. It has been applied to diverse fields, such as magnetic resonance imaging （MRI）, aerospace remote sensing, terahertz photography, and hyperspectral imaging. Compared with conventional silicon-based cameras, single-pixel cameras （SPCs） can achieve image compression and operate over a much broader spectral range. However, the imaging speed of SPCs is governed by the response time of digital mieromirror devices （DMDs） and the amount of com- pression of acquired images, leading to low （ms-level） temporal resolution. Consequently, it is particularly challenging for SPCs to investigate fast dynamic phenomena, which is required commonly in microscopy. Recently, a unique approach based on photonic time stretch （PTS） to achieve high-speed SPI has been reported. It achieves a frame rate far beyond that can be reached with conventional SPCs. In this paper, we first introduce the principles and applications of the PTS technique. Then the basic archi- tecture of the high-speed SPI system is presented, and an imaging flow cytometer with high speed and high throughput is demonstrated experimentally. Finally, the limitations and potential applications of high-speed SPI are discussed.

A research study on the spallation strength of LY12 aluminum under the pre-compression condition

To pre-compress the disk-shaped LY12 samples along the radial direction can be done with the aid of overstress assembly by heating or by mechanical clamping, which can also generate the deviatoric stress fields under different states. The spallation signals of these pre-compressed samples are measured by VISAR in the light-gas gun shock experiments. The experimental results show that even under the same impact velocity, the pullback amplitudes of the velocity at the free surface of the sam- pies vary significantly. According to the experimental data, we propose a distinct concept that the material spallation strength is closely related to the deviatoric stress fields in the material. Based on the numerical simulation, we develop a damage con- stitutive model, which reveals that the deviatoric stress reduces the tensile threshold of the void growth. The numerical inves- tigations also demonstrate that the spallation strength decreases as pre-compression increases. The experimental idea proposed in this paper can also be used to study the spallation process in other structures.