Transient heat transfer has been experimentally investigated for subcooled water jet impingement quenching of a hot rotating stainless steel cylinder. Temperatures beneath the impinged surface were measured during que...Transient heat transfer has been experimentally investigated for subcooled water jet impingement quenching of a hot rotating stainless steel cylinder. Temperatures beneath the impinged surface were measured during quenching and used to estimate surface temperature and surface heat flux by using a developed numerical inverse solution of heat conduction. Heat flux reached its maximum value just after the WF （wetting front） （visible leading edge of boiling region） started moving from stagnation towards the circumferential region. WF moved in a non-uniform manner in angular direction on the hot rotating surface. With the increase of surface velocity, heat flux decreased. Higher surface velocity moved away the produced vapor bubbles and reduced the solid-liquid contact time which made it one-dimensional heat conduction from multi-dimensional, that reduced heat flux. The generated boiling curve from the estimated heat flux showed a reasonable agreement with existing studies. The surface maximum heat flux （maximum value in each cycle） distribution trend with radial position is entirely comparable with the static surface critical heat flux in literature. An explosive to a sheet like flow patterns were observed with the decrease of surface temperature. The flow patterns were followed by the intensity of sound during quenching.展开更多
The free surface flow generated by twin-cylinders in forced motion submerged beneath the free surface is studied based on the boundary element method. Two relative locations, namely, horizontal and vertical, are exami...The free surface flow generated by twin-cylinders in forced motion submerged beneath the free surface is studied based on the boundary element method. Two relative locations, namely, horizontal and vertical, are examined for the twin cylinders. In both cases, the twin cylinders are starting from rest and ultimately moving with the same constant speed through an accelerating process. Assuming that the fluid is inviscid and incompressible and the flow to be irrotational, the integral Laplace equation can be discretized based on the boundary element method. Fully-nonlinear boundary conditions are satisfied on the unknown free surface and the moving body surface. The free surface is traced by a Lagrangian technique. Regriding and remeshing are applied, which is crucial to quality of the numerical results. Single circular cylinder and elliptical cylinder are calculated by linear method and fully nonlinear method for accuracy checking and then fully nonlinear method is conducted on the twin cylinder cases, respectively. The generated wave elevation and the resultant force are analysed to discuss the influence of the gap between the two cylinders as well as the water depth. It is found that no matter the kind of distribution, when the moving cylinders are close to each other, they suffer hydrodynamic force with large absolute value in the direction of motion. The trend of force varying with the increase of gap can be clearly seen from numerical analysis. The vertically distributed twin cylinders seem to attract with each other while the horizontally distributed twin cylinders are opposite when they are close to each other.展开更多
文摘Transient heat transfer has been experimentally investigated for subcooled water jet impingement quenching of a hot rotating stainless steel cylinder. Temperatures beneath the impinged surface were measured during quenching and used to estimate surface temperature and surface heat flux by using a developed numerical inverse solution of heat conduction. Heat flux reached its maximum value just after the WF （wetting front） （visible leading edge of boiling region） started moving from stagnation towards the circumferential region. WF moved in a non-uniform manner in angular direction on the hot rotating surface. With the increase of surface velocity, heat flux decreased. Higher surface velocity moved away the produced vapor bubbles and reduced the solid-liquid contact time which made it one-dimensional heat conduction from multi-dimensional, that reduced heat flux. The generated boiling curve from the estimated heat flux showed a reasonable agreement with existing studies. The surface maximum heat flux （maximum value in each cycle） distribution trend with radial position is entirely comparable with the static surface critical heat flux in literature. An explosive to a sheet like flow patterns were observed with the decrease of surface temperature. The flow patterns were followed by the intensity of sound during quenching.
基金Foundation item： Supported by the Lloyd＇s Register Foundation, the Fundamental Research Funds for the Central Universities （Gram No. HEUCF140115）, the National Natural Science Foundation of China （11102048, 11302057）, the Research Funds for State Key Laboratory of Ocean Engineering in Shanghai Jiao Tong University （Grant No. 1310）, and the Specialized Research Fund for the Doctoral Program of Higher Education of China （20132304120028）.
文摘The free surface flow generated by twin-cylinders in forced motion submerged beneath the free surface is studied based on the boundary element method. Two relative locations, namely, horizontal and vertical, are examined for the twin cylinders. In both cases, the twin cylinders are starting from rest and ultimately moving with the same constant speed through an accelerating process. Assuming that the fluid is inviscid and incompressible and the flow to be irrotational, the integral Laplace equation can be discretized based on the boundary element method. Fully-nonlinear boundary conditions are satisfied on the unknown free surface and the moving body surface. The free surface is traced by a Lagrangian technique. Regriding and remeshing are applied, which is crucial to quality of the numerical results. Single circular cylinder and elliptical cylinder are calculated by linear method and fully nonlinear method for accuracy checking and then fully nonlinear method is conducted on the twin cylinder cases, respectively. The generated wave elevation and the resultant force are analysed to discuss the influence of the gap between the two cylinders as well as the water depth. It is found that no matter the kind of distribution, when the moving cylinders are close to each other, they suffer hydrodynamic force with large absolute value in the direction of motion. The trend of force varying with the increase of gap can be clearly seen from numerical analysis. The vertically distributed twin cylinders seem to attract with each other while the horizontally distributed twin cylinders are opposite when they are close to each other.
