红透山生产探矿思路分析与研究

生产探矿工作是地质勘探工作的继续和深化,具有继承和发展两重性,因此在生产探矿工作中应注意分析、研究和充分利用已有的工作成果,因地制宜地采用不同的勘探网度及勘探方法。矿山生产探矿实践证明,坑探与钻探相结合,探矿与采矿相结合是加速矿山生产探矿的重要手段。通过对红透山井下-877中段的生产探矿思路及勘探网度进行分析可以看出,同一级别的储量,两者的勘探网度并不相同。勘探网度必须要经过对比分析后才能确定,并以是否能够满足采矿设计和施工的要求为目标,确定好勘探工程沿矿体走向、倾向的总体密度,以及单个工程间的距离或单位面积上勘探工程的个数,这样确定的生产探矿网度在实际勘探过程中才是合理可行的。

Discovering hidden information of gene ontology based on complex networks analysis

To resolve the ontology understanding problem, the structural features and the potential important terms of a large-scale ontology are investigated from the perspective of complex networks analysis. Through the empirical studies of the gene ontology with various perspectives, this paper shows that the whole gene ontology displays the same topological features as complex networks including ＂small world＂ and ＂scale-free＂,while some sub-ontologies have the ＂scale-free＂ property but no ＂small world＂ effect.The potential important terms in an ontology are discovered by some famous complex network centralization methods.An evaluation method based on information retrieval in MEDLINE is designed to measure the effectiveness of the discovered important terms.According to the relevant literature of the gene ontology terms,the suitability of these centralization methods for ontology important concepts discovering is quantitatively evaluated.The experimental results indicate that the betweenness centrality is the most appropriate method among all the evaluated centralization measures.

Kernel principal component analysis network for image classification

In order to classify nonlinear features with a linear classifier and improve the classification accuracy, a deep learning network named kernel principal component analysis network（ KPCANet） is proposed. First, the data is mapped into a higher-dimensional space with kernel principal component analysis to make the data linearly separable. Then a two-layer KPCANet is built to obtain the principal components of the image. Finally, the principal components are classified with a linear classifier. Experimental results showthat the proposed KPCANet is effective in face recognition, object recognition and handwritten digit recognition. It also outperforms principal component analysis network（ PCANet） generally. Besides, KPCANet is invariant to illumination and stable to occlusion and slight deformation.

Effective search with saliency-based matching and cluster-based browsing

Similarity matching and this paper, a saliency-based information presentation are two matching algorithm is proposed key factors in information retrieval. In for user-oriented search based on the psychological studies on human perception, and major emphasis on the saliently similar aspect of objects to be compared is placed and thus the search result is more agreeable for users. After relevant results are obtained, the cluster-based browsing algorithm is adopted for search result presentation based on social network analysis. By organizing the results in clustered lists, the user can have a general understanding of the whole collection by viewing only a small part of results and locate those of major interest rapidly. Experimental results demonstrate the advantages of the proposed algorithm over the traditional work.

Hybrid scheduling model and analysis of performance for switched industrial Ethernet

The fact that outburst traffic in industrial Ethemet was focused on that would bring self-similar phenomenon leading to the delay increase of the cyclical data, and a hybrid priority queue schedule model was proposed in which the outburst data was given the highest priority. Some properties of the self-similar outburst data were proved by network calculus, and its service curve scheduled by the switch was gained. And then the performance of the scheduling algorithm was obtained. The simulation results are close to those calculated by using network calculus model. Some results are of actual significance to the construction of switched industrial Ethernet.

Comparison of Improved Meshless Interpolation Schemes for SPH Method and Accuracy Analysis

In the smoothed particle hydrodynamics (SPH) method, a meshless interpolation scheme is needed for the unknown function in order to discretize the governing equation.A particle approximation method has so far been used for this purpose.Traditional particle interpolation (TPI) is simple and easy to do, but its low accuracy has become an obstacle to its wider application.This can be seen in the cases of particle disorder arrangements and derivative calculations.There are many different methods to improve accuracy, with the moving least square (MLS) method one of the most important meshless interpolation methods.Unfortunately, it requires complex matrix computing and so is quite time-consuming.The authors developed a simpler scheme, called higher-order particle interpolation (HPI).This scheme can get more accurate derivatives than the MLS method, and its function value and derivatives can be obtained simultaneously.Although this scheme was developed for the SPH method, it has been found useful for other meshless methods.

A NOVEL CALL ADMISSION CONTROL SCHEME IN CELLULAR/WLAN INTEGRATION AND PERFORMANCE ANALYSIS

In order to achieve the Quality of Service(QoS) provisioning and efficient resource utili-zation in cellular network and Wireless Local Area Network(WLAN) integration,an Integrated Ser-vice-Based Call Admission Control(ISB-CAC) scheme is proposed in this paper.The integrated network is modeled by using multi-dimensional Markov chains.The numerical analysis is presented to evaluate the important performance measures such as the blocking probability of originating calls,the dropping probability,and the average transfer time,etc.The steady-state probabilities of the multi-dimensional Markov chains are obtained by using an iterative approach,and the CAC pa-rameters are optimally designed.The analytical model is validated by the computer simulation.It is shown that compared with the conventional WLAN-First Call Admission Control(WF-CAC) scheme,the proposed ISB-CAC scheme not only provides better QoS for mobile users but also utilizes the bandwidth resources more efficiently.

Synthesis of Flexible Heat Exchanger Networks with Stream Splits Based on Rangers of Stream Supply Temperatures and Heat Capacity Flowrates

A new superstructure model of heat exchanger networks (HEN) with streamsplits based on rangers of streams supply temperatures and heat capacity flow rates is presented.The simultaneous optimal mathematical model of flexible HEN synthesis is established too. Firstly,the streams with rangers of supply temperatures and/or the streams with the rangers of heat capacityflow rates are pretreated; Secondly, several rules are proposed to establish the superstructuremodel of HEN with splits and the simultaneous optimal mathematical model of flexible HEN; Thirdly,the improving genetic algorithm is applied to solve the mathematical model established at the secondstep effectively, and the original optimal structure of HEN based on the maximum operation limitingcondition can be obtained easily; Finally, the rules of heat exchange unit merged and the heat loadof heat exchanger relaxed are presented, the flexible configuration of HEN satisfied the operationcondition between the upper and down bounds of supply temperature and heat capacity flow rates canbe obtained based on the original optimal structure of HEN by means of these rules. A case studydemonstrates the method presented in this paper is effective

Airflow adjustment and minimization of the air power of ventilation network

It is often required to know which roadway （adjustment roadway） resistances and how much values of the resis- tances should be changed to make the airflow rates in roadways （target roadways） to certain required values in the practice of mine ventilation. In this case, the airflow rates of the target roadways and the resistances of the roadways other than the ad- justment roadways are the given conditions and the resistances of the adjustment roadways are the solutions to be found. No straightforward method to solve the problem has been found up to now. Therefore, trial and error method using the ventilation network analysis program is utilized to solve the problem so far. The method takes long calculation time and the best answer is not necessarily obtained. The authors newly defined ＂airflow element＂ as an element of the ventilation network analysis. The resistances that satisfy the airflow requirements can be calculated straight forwardly by putting the function of the airflow element into the ventilation network analysis. The air power required for the ventilation can be minimized while meeting the airflow requirements by the advanced application of the method. The authors made the computer program fulfill the method. The program was applied to actual ventilation network and it was found that the method is very practical and the time required for the analysis is short.

Economic Viability of Mega-size Containership in Different Service Networks

The mega-size containership viability was analyzed by considering different service networks for different ship sizes:hub-and-spoke and multi-port-calling (MPC) networks for mega-size containerships and conventional ships.A model was proposed,which quantifies the economies of scale in operating large con- tainerships and constructs models for ship routing under different service networks.A sensitivity analysis was conducted to test the effect of feeder costs and the results analyzed to determine optimal containership size with respect to different operational scenarios.Throughout model applications for Asia-Europe and Asia-North America trades,the mega-size containership is competitive in all scenarios for Asia-Europe,while it is viable for Asia-North America only when the feeder costs are low.

A component-based back-propagation reliability model with low complexity for complex software systems

Since most of the available component-based software reliability models consume high computational cost and suffer from the evaluating complexity for the software system with complex structures,a component-based back-propagation reliability model(CBPRM)with low complexity for the complex software system reliability evaluation is presented in this paper.The proposed model is based on the artificial neural networks and the component reliability sensitivity analyses.These analyses are performed dynamically and assigned to the neurons to optimize the reliability evaluation.CBPRM has a linear increasing complexity and outperforms the state-based and the path-based reliability models.Another advantage of CBPRM over others is its robustness.CBPRM depends on the component reliabilities and the correlative sensitivities,which are independent from the software system structure.Based on the theory analysis and experiment results,it shows that the complexity of CBPRM is evidently lower than the contrast models and the reliability evaluating accuracy is acceptable when the software system structure is complex.

Illumination of parameter contributions on uneven break： phenomenon in underground stoping mines

One of the most serious conundrum facing the stope production in underground metalliferous mining is uneven break （UB： unplanned dilution and ore-loss）. Although the UB has a huge economic fallout to the entire mining process, it is practically unavoidable due to the complex causing mechanism. In this study, the contribution of ten major UB causative parameters ha,; been scrutinised based on a published UB predicting artificial neuron network （ANN） model to put UB under the engineering management. Two typical ANN sensitivity analysis methods, i.e., connection weight algorithm （CWA） and profile method （PM） have been applied. As a result of CWA and PM applications, adjusted Qrate （AQ） revealed as the most influential parameter to UB with contribution of 22,40% in CWA and 20,48% in PM respectively. The findings of this study can be used as an important reference in stope design, production, and reconciliation stages on underground stoping mine.

STRUCTURE OF SOUTH ASIA HIGH IN THE STRATOSPHERE AND INFLUENCE OF ENSO

The structure of the South Asia High(SAH)in the stratosphere and the influence of ENSO on the SAH are systematically investigated with the long-term ECMWF reanalysis data.The results show that the SAH only exists in low levels of the stratosphere.The maximum intensity of the High is located at around 150 hPa and there is no obvious anti-cyclonic structure above 50 hPa.The axis of the SAH center tends to be northwest slanting from lower levels to higher levels.Further analyses show that the geopotential height and temperature fields of the SAH have dramatic anomalies during El Ni?o years and La Ni?a years. Corresponding to the ENSO,the SAH is weaker(stronger)at the warm(cold)phase.

Multicriteria Methods for Distributed Generation Resources Optimization

The optimization process of embedded, or DG （distributed generation） is a very complex task, and it should be evaluated and compared by means of multi-criteria methods of analysis. The classical method for selection is usually based only on a single criterion analysis, and it is defined by thermal or economic aspects. The problem of optimal dispatch of DG is typical example of optimization, because it differs from the classical problem of generation dispatch in the power system, due to the specific criteria related to the DG interconnection. The most important goals are to maximize the renewable production and to minimize the total cost, while satisfying additional constraints related to the operation of a distribution network. As there are many DGs in a distribution network, it is very complicated to decide the optimal DG outputs to satisfy all the criteria and constraints imposed by the distribution network. Another problem is the lack of the dispatcher control over DGs, and very often, the only available action is to switch on or off the generator. Finally, network operator and DG owner perspective are often opposed regarding appropriate control action in the network. In this paper, a multicriteria decision support based on AHP （analytical hierarchical processes） method is proposed for the choice of the dispatching action. The method is illustrated on the choice of the DG to be switched off in the case or reverse power flow.

Graph-Theoretic Approach to Network Analysis

Networks are a class of general systems represented by becomes a weighted graph visualizing the constraints imposed their UC-structure. Suppressing the nature of elements the network by interconnections rather than the elements themselves. These constraints follow generalized Kirchhoff＇s laws derived from physical constraints. Once we have a graph; then the working environment becomes the graph-theory. An algorithm derived from graph theory is developed within the paper in order to analyze general networks. The algorithm is based on computing all the spanning trees in the graph G with an associated weight. This weight is the product ofadmittance＇s of the edges forming the spanning tree. In the first phase this algorithm computes a depth first spanning tree together with its cotree. Both are used as parents for controlled generation of off-springs. The control is represented in selecting the off-springs that were not generated previously. While the generation of off-springs, is based on replacement of one or more tree edges by cycle edges corresponding to cotree edges. The algorithm can generate a frequency domain analysis of the network.

Partner selection of collaborative innovation of strategic emerging industry - based on ANP-GRA

The rise and development of strategic emerging industries need a new innovative mode--collaborative innovation, collaborative innovation as a complex multi-object relationship, it is essential to select an appropriate partner. Partner selection is the key to the success of strategic emerging industry collaborative innovation. This paper takes collaborative innovation partner selection as research focus, establishing evaluation system of collaborative innovation partner selection, using analytic network process （ANP） to determine the weight of evaluation index, then, obtaining grey correlation rank of collaborative innovation partner by Grey relational analysis （GILA）, providing the basis for strategic emerging industry to select collaborative innovation partner.

Human settlement's social network analysis based on spatial trend surface model:a case study of Chongqing Municipality

Integrated with GIS and remote sensing(RS) technology,a systematic analysis and its methodology for human-settlements social environment has been introduced.This methodology has been called spatial trend field model(STFM).STFM's application history in the field of human-settlements social environment has been discussed at first.Then,some index data models have been created through STFM,which include population density trend field,human activity strength trend field,city-town spatial density trend field,urbanization ratio trend field,road density trend field,GDP spatial density trend field and PER-GDP spatial density trend field.With all above-mentioned indexes as input data,through Iterative Self-Organizing Data Analysis Techniques Algorithm(ISODATA),this paper makes a verification study of Chongqing municipality.The result of the case study confirms that STFM methodology is credible and has high efficiency for regional human-settlements study.

Entransy dissipation,entransy-dissipation-based thermal resistance and optimization of one-stream hybrid thermal network

The one-stream hybrid thermal network is analyzed and discussed based on the entransy theory,and the results are compared with those from the entropy generation optimization.The theoretical analysis indicates that the minimum heat-flow-weighted temperature of the thermal networks corresponds to the minimum entransy dissipation rate and the minimum thermal resistance.For a simple hybrid thermal network consisting of three thermal components,the expression of entransy dissipation is conducted,and the heat transfer area and the mass flow rate are calculated and optimized.The optimal results are obtained in order to minimize the entransy dissipation and the thermal resistance.The optimal results are calculated for various combinations,such as series connection,parallel connection and other hybrid connections.The numerical results are in accordance with the theoretical analysis.Both the theoretical analysis and the numerical results show that the minimum entransy dissipation and the minimum thermal resistance correspond to the minimum heat-flow-weighted temperature of the thermal networks while the minimum entropy generation does not.

Road Density Analysis Based on Skeleton Partitioning for Road Generalization

This paper proposes an algorithm for road density analysis based on skeleton partitioning. Road density provides metric and statistical information about overall road distribution at the macro level. Existing measurements of road density based on grid method, fractal geometry and mesh density are reviewed, and a new method for computing road density based on skeleton partitioning is proposed. Experiments illustrate that road density based on skeleton partitioning may reveal the overall road distribution. The proposed measurement is further tested against road maps at 1:10k scale and their generalized version at 1:50k scale. By comparing the deletion percentage within different density interval, a road density threshold can be found, which indicate the need for further operations during generalization. Proposed road density may be used to examine the quality of road generalization, to explore the variation of road network through temporal and spatial changes, and it also has future usage in urban planning, transportation and estates evaluation practice.

Multi-parameter joint optimization for double-strip high-speed pantographs to improve pantograph-catenary interaction quality

The significant increase in speed of high-speed train will cause the dynamic contact force of the pantograph-catenary system to fluctuate more severely,which poses a challenge to the study of the pantograph-catenary relationship and the design of highspeed pantographs.Good pantograph-catenary coupling quality is the essential condition to ensure safe and efficient operation of high-speed train,stable and reliable current collection,and reduction in the wear of contact wires and pantograph contact strips.Among them,the dynamic parameters of high-speed pantographs are crucial to pantograph-catenary coupling quality.With the reduction of the standard deviation of the pantograph-catenary contact force as the optimization goal,multi-parameter joint optimization designs for the high-speed pantograph with two contact strips at multiple running speeds are proposed.Moreover,combining the sensitivity analysis at the optimal solutions,with the parameters and characteristics of in-service DSA380 highspeed pantograph,the optimization proposal of DSA380 was given.