This paper describes how to use medium access control (MAC) isolation to enhance management performance in public wireless LAN (PWLAN). To comply with the IEEE 802.11 standards, a scheme to implement MAC isolation in ...This paper describes how to use medium access control (MAC) isolation to enhance management performance in public wireless LAN (PWLAN). To comply with the IEEE 802.11 standards, a scheme to implement MAC isolation in WLAN access points by re-designing the Distribution_Service component of the MAC state machine is proposed. A variable named dotl 1 Isolation is defined to determine whether the MAC level communication between wireless stations in the same BSS is permitted or not. Finally, a design solution based on MPC860 hardware and embedded Linux software for PWLAN access point is specified. The simulation results of MAC isolation for PWLAN show that the proposed scheme is feasible and effective.展开更多
In the Internet of things, it is of critical importance to fully utilize the potential capacity of the network with efficient medium access control （MAC） mechanisms. In this paper, we study the convergence property ...In the Internet of things, it is of critical importance to fully utilize the potential capacity of the network with efficient medium access control （MAC） mechanisms. In this paper, we study the convergence property of the fixed point formulation of distributed coordination function （DCF）, which is widely used for medium access control in wireless networks. We first Kind that the fixed point could be repelling, which means that it is impossible for an MAC system to converge at its fixed point. Next, we show the existence of periodic points to prove that the fixed point function will oscillate between two periodic points when the fixed point is repelling. We also find that the average of the two periodic points is a close approximation of the fixed point. Based on the findings, we propose an algorithm to compute the fixed point efficiently. Simulation results verify the accuracy and efficiency of our algorithm compared with the previous fixed point computing method.展开更多
In this note, we would like to point out that （i） of Corollary 1 given by Zhang et al. （cf Commun. Theor. Phys. 39 （2003） 381） is incorrect in general.
For a standalone PV （photovoltaic） power generation system, the author previously proposed a new MPPT （maximum power point tracking） control method in which the I-V characteristics are scanned with a detection int...For a standalone PV （photovoltaic） power generation system, the author previously proposed a new MPPT （maximum power point tracking） control method in which the I-V characteristics are scanned with a detection interval control that operates at specified intervals and monitors the maximum power point. The author has obtained satisfactory results using this new MPPT control method. This paper investigates the application of the new MPPT control method for a PCS （power conditioning system） in a grid-connected type PV power generation system. The experimental results clearly demonstrate that the developed PCS offers outstanding effectiveness in tracking the maximum power point in partially shaded environments.展开更多
Many sensor network applications require location awareness,but it is often too expensive to equip a global positioning system(GPS) receiver for each network node.Hence,localization schemes for sensor networks typical...Many sensor network applications require location awareness,but it is often too expensive to equip a global positioning system(GPS) receiver for each network node.Hence,localization schemes for sensor networks typically use a small number of seed nodes that know their locations and protocols whereby other nodes estimate their locations from the messages they receive.For the inherent shortcomings of general particle filter(the sequential Monte Carlo method) this paper introduces particle swarm optimization and weighted centroid algorithm to optimize it.Based on improvement a distributed localization algorithm named WC-IPF(weighted centroid algorithm improved particle filter) has been proposed for localization.In this localization scheme the initial estimate position can be acquired by weighted centroid algorithm.Then the accurate position can be gotten via improved particle filter recursively.The extend simulation results show that the proposed algorithm is efficient for most condition.展开更多
A partition-of-unity （PU） based ＂FE-Meshfree＂ three-node triangular element （Trig3-RPIM） was recently developed for linear elastic problems. This Trig3-RPIM element employs hybrid shape functions that combine th...A partition-of-unity （PU） based ＂FE-Meshfree＂ three-node triangular element （Trig3-RPIM） was recently developed for linear elastic problems. This Trig3-RPIM element employs hybrid shape functions that combine the shape functions of three-node triangular element （Trig3） and radial-polynomial basis functions for the purpose of synergizing the merits of both finite element method and meshfree method. Although Trig3-RPIM element is capable of obtaining higher accuracy and convergence rate than the Trig3 element and four-node iso-parametric quadrilateral element without adding extra nodes or degrees of freedom （DOFs）, the nodal stress field through Trig3-RP1M element is not continuous and extra stress smooth operations are still needed in the post processing stage. To further improve the property of Trig3-RPIM element, a new PU-based triangular element with continuous nodal stress, called Trig3-RPIMcns, is developed. Numerical examples including several linear, free vibration and forced vibration test problems, have confirmed the correctness and feasibility of the proposed Trig3-RPIMcns element.展开更多
文摘This paper describes how to use medium access control (MAC) isolation to enhance management performance in public wireless LAN (PWLAN). To comply with the IEEE 802.11 standards, a scheme to implement MAC isolation in WLAN access points by re-designing the Distribution_Service component of the MAC state machine is proposed. A variable named dotl 1 Isolation is defined to determine whether the MAC level communication between wireless stations in the same BSS is permitted or not. Finally, a design solution based on MPC860 hardware and embedded Linux software for PWLAN access point is specified. The simulation results of MAC isolation for PWLAN show that the proposed scheme is feasible and effective.
基金supported by the National Basic Research Program of China(No.2011CB302702)the NationalNatural Science Foundation of China(Nos.60803140,60970133,61070187)
文摘In the Internet of things, it is of critical importance to fully utilize the potential capacity of the network with efficient medium access control （MAC） mechanisms. In this paper, we study the convergence property of the fixed point formulation of distributed coordination function （DCF）, which is widely used for medium access control in wireless networks. We first Kind that the fixed point could be repelling, which means that it is impossible for an MAC system to converge at its fixed point. Next, we show the existence of periodic points to prove that the fixed point function will oscillate between two periodic points when the fixed point is repelling. We also find that the average of the two periodic points is a close approximation of the fixed point. Based on the findings, we propose an algorithm to compute the fixed point efficiently. Simulation results verify the accuracy and efficiency of our algorithm compared with the previous fixed point computing method.
文摘In this note, we would like to point out that （i） of Corollary 1 given by Zhang et al. （cf Commun. Theor. Phys. 39 （2003） 381） is incorrect in general.
文摘For a standalone PV （photovoltaic） power generation system, the author previously proposed a new MPPT （maximum power point tracking） control method in which the I-V characteristics are scanned with a detection interval control that operates at specified intervals and monitors the maximum power point. The author has obtained satisfactory results using this new MPPT control method. This paper investigates the application of the new MPPT control method for a PCS （power conditioning system） in a grid-connected type PV power generation system. The experimental results clearly demonstrate that the developed PCS offers outstanding effectiveness in tracking the maximum power point in partially shaded environments.
文摘Many sensor network applications require location awareness,but it is often too expensive to equip a global positioning system(GPS) receiver for each network node.Hence,localization schemes for sensor networks typically use a small number of seed nodes that know their locations and protocols whereby other nodes estimate their locations from the messages they receive.For the inherent shortcomings of general particle filter(the sequential Monte Carlo method) this paper introduces particle swarm optimization and weighted centroid algorithm to optimize it.Based on improvement a distributed localization algorithm named WC-IPF(weighted centroid algorithm improved particle filter) has been proposed for localization.In this localization scheme the initial estimate position can be acquired by weighted centroid algorithm.Then the accurate position can be gotten via improved particle filter recursively.The extend simulation results show that the proposed algorithm is efficient for most condition.
基金the National Natural Science Foundation of China(Grant Nos.51609240,11572009&51538001)and the National Basic Research Program of China(Grant No.2014CB047100)
文摘A partition-of-unity （PU） based ＂FE-Meshfree＂ three-node triangular element （Trig3-RPIM） was recently developed for linear elastic problems. This Trig3-RPIM element employs hybrid shape functions that combine the shape functions of three-node triangular element （Trig3） and radial-polynomial basis functions for the purpose of synergizing the merits of both finite element method and meshfree method. Although Trig3-RPIM element is capable of obtaining higher accuracy and convergence rate than the Trig3 element and four-node iso-parametric quadrilateral element without adding extra nodes or degrees of freedom （DOFs）, the nodal stress field through Trig3-RP1M element is not continuous and extra stress smooth operations are still needed in the post processing stage. To further improve the property of Trig3-RPIM element, a new PU-based triangular element with continuous nodal stress, called Trig3-RPIMcns, is developed. Numerical examples including several linear, free vibration and forced vibration test problems, have confirmed the correctness and feasibility of the proposed Trig3-RPIMcns element.
