Two-dimensional boundary layer flow of an incompressible third grade nanofluid over a stretching surface is investigated.Influence of thermophoresis and Brownian motion is considered in the presence of Newtonian heati...Two-dimensional boundary layer flow of an incompressible third grade nanofluid over a stretching surface is investigated.Influence of thermophoresis and Brownian motion is considered in the presence of Newtonian heating and viscous dissipation.Governing nonlinear problems of velocity, temperature and nanoparticle concentration are solved via homotopic procedure.Convergence is examined graphically and numerically. Results of temperature and nanoparticle concentration are plotted and discussed for various values of material parameters, Prandtl number, Lewis number, Newtonian heating parameter, Eckert number and thermophoresis and Brownian motion parameters. Numerical computations are performed. The results show that the change in temperature and nanoparticle concentration distribution functions is similar when we use higher values of material parameters β1 andβ2. It is seen that the temperature and thermal boundary layer thickness are increasing functions of Newtonian heating parameter γ.An increase in thermophoresis and Brownian motion parameters tends to an enhancement in the temperature.展开更多
The dissipation rate of turbulent kinetic energy （ ε ） is the key process parameters for mixing in surface aerators. At constant dynamic variables （rotational speed）, ε is greatly affected by the geometric param...The dissipation rate of turbulent kinetic energy （ ε ） is the key process parameters for mixing in surface aerators. At constant dynamic variables （rotational speed）, ε is greatly affected by the geometric parameters, such as impeller diameter, cross-sectional area of the tank, liquid height, rotor blade length and immersion height. By doing numerical computation by visimix, present work analyzes the effect of non-dimensional （which is non-dimensionalized through rotor diameter） geometric parameters on ε. With an increase in liquid height, there is an increase in the case of energy dissipation. In the case of tank area and blade length, it is vice versa. Energy dissipation is not affected by the variation in immersion height of the impeller.展开更多
The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among...The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among strain rate sensitivity,power dissipation efficiency and instability parameter under different conditions were studied.Power dissipation maps and instability maps at different strains were established.The optimal and the instable deformation regimes were established by the processing maps based on the dynamic material model.The processing maps were developed for the typical strains of 0.2,0.3,0.5 and 0.7,predicting the instability regions occurring at high strain rate more than 0.05 s^(-1),which should be avoided during hot deformation.The optimized processing parameters for hot working of 2CrllMolVNbN supercritical stainless steel were temperatures of 1080-1120 ℃ and strain rates of 0.005-0.01 s^(-1).展开更多
基金funded by the Deanship of Scientific Research (DSR), King Abdulaziz University (KAU), under Grant No. 37-130-35-HiCi
文摘Two-dimensional boundary layer flow of an incompressible third grade nanofluid over a stretching surface is investigated.Influence of thermophoresis and Brownian motion is considered in the presence of Newtonian heating and viscous dissipation.Governing nonlinear problems of velocity, temperature and nanoparticle concentration are solved via homotopic procedure.Convergence is examined graphically and numerically. Results of temperature and nanoparticle concentration are plotted and discussed for various values of material parameters, Prandtl number, Lewis number, Newtonian heating parameter, Eckert number and thermophoresis and Brownian motion parameters. Numerical computations are performed. The results show that the change in temperature and nanoparticle concentration distribution functions is similar when we use higher values of material parameters β1 andβ2. It is seen that the temperature and thermal boundary layer thickness are increasing functions of Newtonian heating parameter γ.An increase in thermophoresis and Brownian motion parameters tends to an enhancement in the temperature.
文摘The dissipation rate of turbulent kinetic energy （ ε ） is the key process parameters for mixing in surface aerators. At constant dynamic variables （rotational speed）, ε is greatly affected by the geometric parameters, such as impeller diameter, cross-sectional area of the tank, liquid height, rotor blade length and immersion height. By doing numerical computation by visimix, present work analyzes the effect of non-dimensional （which is non-dimensionalized through rotor diameter） geometric parameters on ε. With an increase in liquid height, there is an increase in the case of energy dissipation. In the case of tank area and blade length, it is vice versa. Energy dissipation is not affected by the variation in immersion height of the impeller.
基金Project(CDJZR14130006)supported by the Fundamental Research Funds for the Central Universities,China
文摘The hot working mechanism of 2Cr11 MolVNbN steel was investigated by means of compression tests at temperatures of900-1150 ℃ and strain rates of 0.005-5 s^(-1).At strains of 0.2,0.3,0.5 and 0.7,the relationship among strain rate sensitivity,power dissipation efficiency and instability parameter under different conditions were studied.Power dissipation maps and instability maps at different strains were established.The optimal and the instable deformation regimes were established by the processing maps based on the dynamic material model.The processing maps were developed for the typical strains of 0.2,0.3,0.5 and 0.7,predicting the instability regions occurring at high strain rate more than 0.05 s^(-1),which should be avoided during hot deformation.The optimized processing parameters for hot working of 2CrllMolVNbN supercritical stainless steel were temperatures of 1080-1120 ℃ and strain rates of 0.005-0.01 s^(-1).
