The optimization of micro milling electrical discharge machining（EDM） process parameters of Inconel 718 alloy to achieve multiple performance characteristics such as low electrode wear,high material removal rate and...The optimization of micro milling electrical discharge machining（EDM） process parameters of Inconel 718 alloy to achieve multiple performance characteristics such as low electrode wear,high material removal rate and low working gap was investigated by the Grey-Taguchi method.The influences of peak current,pulse on-time,pulse off-time and spark gap on electrode wear（EW）,material removal rate（MRR） and working gap（WG） in the micro milling electrical discharge machining of Inconel 718 were analyzed.The experimental results show that the electrode wear decreases from 5.6×10-9 to 5.2×10-9 mm3/min,the material removal rate increases from 0.47×10-8 to 1.68×10-8 mm3/min,and the working gap decreases from 1.27 to 1.19 μm under optimal micro milling electrical discharge machining process parameters.Hence,it is clearly shown that multiple performance characteristics can be improved by using the Grey-Taguchi method.展开更多
A comprehensive assessing method based on the principle of the gray system theory and gray relational grade analysis was put forward to optimize water consumption forecasting models. The method provides a better accur...A comprehensive assessing method based on the principle of the gray system theory and gray relational grade analysis was put forward to optimize water consumption forecasting models. The method provides a better accuracy for the assessment and the optimal selection of the water consumption forecasting models. The results show that the forecasting model built on this comprehensive assessing method presents better self-adaptability and accuracy in forecasting.展开更多
文摘The optimization of micro milling electrical discharge machining（EDM） process parameters of Inconel 718 alloy to achieve multiple performance characteristics such as low electrode wear,high material removal rate and low working gap was investigated by the Grey-Taguchi method.The influences of peak current,pulse on-time,pulse off-time and spark gap on electrode wear（EW）,material removal rate（MRR） and working gap（WG） in the micro milling electrical discharge machining of Inconel 718 were analyzed.The experimental results show that the electrode wear decreases from 5.6×10-9 to 5.2×10-9 mm3/min,the material removal rate increases from 0.47×10-8 to 1.68×10-8 mm3/min,and the working gap decreases from 1.27 to 1.19 μm under optimal micro milling electrical discharge machining process parameters.Hence,it is clearly shown that multiple performance characteristics can be improved by using the Grey-Taguchi method.
基金Project(2003BA808A15-2-4) supported by the National Scientific and Technologies Key Task Program
文摘A comprehensive assessing method based on the principle of the gray system theory and gray relational grade analysis was put forward to optimize water consumption forecasting models. The method provides a better accuracy for the assessment and the optimal selection of the water consumption forecasting models. The results show that the forecasting model built on this comprehensive assessing method presents better self-adaptability and accuracy in forecasting.
