Study on the Mathematical Model of Hydraulic Jump Atomization

An equation of atomization quantity from energy dissipation by hydraulic jump was derived from the dimensional analysis. By applying Gauss diffusion equation, the spray diffusion rule in valley was studied under the condition of continuous linear source and random wind direction.By considering the spray rain switching process, coagulation, condensation and evaporation of droplets, the air temperature, air relative humidity, spray density and the rainfall intensity in the lower reaches of the linear source were calculated. The 3 D numerical simulation fitted well with prototype monitoring. Finally, the prediction of atomization influence on environments for Xiangjiaba Hydropower Station was conducted.

Energy Consumption in Comminution of Mica with Cavitation Abrasive Water Jet

We have studied the efficiency of energy consumption in the comminution of mica powder with cavitation abrasive water jet technology. The energy required to create new surfaces in the comminution of mica powder with cavitation abrasive water jet was calculated,in order to estimate its efficiency of energy consumption. The particle size distribution and the specific surface area were measured by applying a JEM-200CX transmission electron microscope and an Autosorb-1 automatic surface area analyzer. The study results show that the efficiency of energy consumed in creating new surface areas is as high as 2.92%,or 4.94% with the aid of cavitation in the comminution of mica powder. This efficiency will decrease with an increase in the number of comminutions. After three comminutions,the efficien-cies will become 1.91% and 2.29% for comminution without cavitation and with cavitation,respectively. The abrasive water jet technology is an effective way for comminution of mica powder.

Relationship between Diabetes Mellitus and Food Balance in the Kingdom of Saudi Arabia

The present explanatory study was carried out to investigate the relation between diabetes mellitus and food balance in the Kingdom of Saudi Arabia during 2005-2010, using published data. This study was conducted to investigate the relationship between food balance and diabetes mellitus, using published data on food balances in the Kingdom of Saudi Arabia during 2005-2007, published by the Ministry of Agriculture in 2012 and Medical Technical papers and Scientific Reports published on Diabetes Mellitus in Saudi Arabia in an explanatory study. Food balance was calculated per capita and then its level of change was compared with changing of diabetes mellitus in the country. Results illustrated that Saudi citizen daily protein consumption （DPC） during 2005-2007 （g/capita/day） is higher than the average global consumption level of protein with 15.27%, daily fat consumption （DFC） with 24.56% and daily energy consumption （DEC） with 16.93% and increases than recommended level by International Nutrition Organizations （INO） with 56% for protein, 60.49% for fat and 27.37% for energy. On the other hand, DPC per capita in Saudi Arabia decreased during the period 2008-2010 from 88.3 g/day to 82.36 g/day. Moreover, DFC per capita in Saudi Arabia decreased during the period 2008-2010 from 3,247.90 Cal/capita/day to 3,176.43 Cal/capita/day, and daily energy consumption （DEC） of Saudi citizen increases than world consumption with 16.93%, while increases with 27.37% than INO. Despite this, DPC, DFC and DEC per capita in Saudi Arabia were still higher than world mean. On the other side, results illustrated that the number of diabetic patients in Saudi Arabia during the same period （2005-2010）. The curve of diabetic patient＇s number in Saudi Arabia during 2005-2010 is regular ascending with increasing level ranged between 7.10% in 2005 and 12.44% in 2010. It is essential to devise Saudi National Programme to educate the public about the relation of food balances and diabetes, so it could be avoided, and provide citizens with healthy dietary balances tables.

钢铁生产的水能关系分析

从钢铁生产过程中水资源使用时的能耗角度研究了钢铁联合企业的水能关系,提出了水能强度的概念来评价企业生产过程中水资源利用的节能水平,建立了钢铁企业的水能关系模型。以中国某大型钢铁联合企业为例,计算并分析了该企业的水能关系。该企业总的水能量为55 709kW·h/h,重复用水水能量占整个钢铁企业全部水能量的82%,补水水能量占16%,排水水能量占1%;各工序中热轧工序占比最大,其次是炼铁、炼钢工序,冷轧、烧结和炼焦工序较低。该企业的吨钢水能强度为0.208kW·h/m^3,炼铁工序的水能强度最高,热轧、炼钢工序次之,烧结、冷轧和炼焦工序较低。最后,从钢铁生产过程水资源利用的角度得到节能的方向及措施。

Morphology, flight performance, and water crossing tendencies of Afro-Palearctic raptors during migration

Raptors primarily use soaring-gliding flight which exploits thermals and ridge lifts over land to reduce energetic costs However during migration, these birds often have to cross water surfaces where thermal currents are weak; during these times, birds mainly use flapping （powered） flight which increases energy consumption and mortality risk. As a result, some species have evolved strategies to reduce the amount of time spent over water by taking extensive detours over land. In this paper, we con- ducted a meta-analysis of water-crossing tendencies in Afro-Palearctic migrating raptors in relation to their morphology, their flight performance, and their phylogenetic relationships. In particular, we considered the aspect ratio （calculated as the wing span squared divided by wing area）, the energetic cost of powered flight, and the maximum water crossing length regularly performed by adult birds. Our results suggest that energy consumption during powered flight predominately affects the ability of raptors to fly over water surfaces