期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
非线性压电振动能量采集器与非线性接口转换电路的耦合动力学特性研究 被引量:2
1
作者 朱强国 王光庆 +2 位作者 刘周龙 郑友成 周铄 《仪器仪表学报》 EI CAS CSCD 北大核心 2022年第9期178-192,共15页
压电振动能量采集器是实现低功耗电子产品无线自供电的核心部件,其与非线性接口转换电路的耦合机理是提升无线自供电系统输出性能的关键理论。以非线性三稳态压电振动能量采集器及其4种非线性接口转换电路为对象,建立动力学模型,利用谐... 压电振动能量采集器是实现低功耗电子产品无线自供电的核心部件,其与非线性接口转换电路的耦合机理是提升无线自供电系统输出性能的关键理论。以非线性三稳态压电振动能量采集器及其4种非线性接口转换电路为对象,建立动力学模型,利用谐波平衡方法求解不同接口电路下系统耦合动态响应的稳态解;仿真分析了系统参数对接口电路输出特性的影响。研究结果表明,当机电耦合系数较小时,串联同步电感开并接口电路(S-SSHI)适合于频率小于7 Hz、负载电阻小于7.4×10^(6)Ω的场合,而并联同步电感开关接口电路(P-SSHI)则相反;当机电耦合系数较大时,直流电(DC)电路具有优势,功率达到4.5×10^(-3)mW;交流电(AC)电路和DC电路具有较宽的机电耦合系数范围,而P-SSHI电路和S-SSHI电路却较窄但输出功率高,最大输出功率可达到19.0×10^(-3)和14.3×10^(-3)mW。实验验证了仿真结果的正确性。 展开更多
关键词 无线自供电 压电振动能量采集器 谐波平衡法 非线性电路 耦合动力学特性
下载PDF
采煤机截割部动力学性能优化分析
2
作者 王斌 《机械管理开发》 2024年第3期70-72,共3页
基于采煤机截割部多级齿轮传动-箱体耦合动力学模型及仿真,介绍一种采煤机截割部动力学性能优化设计。具体设计中需要先构建耦合模型,再通过耦合模型从固有振动特性、动态响应特性以及多级齿轮传动-箱体耦合动力学特性三个角度实施仿真... 基于采煤机截割部多级齿轮传动-箱体耦合动力学模型及仿真,介绍一种采煤机截割部动力学性能优化设计。具体设计中需要先构建耦合模型,再通过耦合模型从固有振动特性、动态响应特性以及多级齿轮传动-箱体耦合动力学特性三个角度实施仿真分析,根据仿真结果实施采煤机截割时动力学性能优化设计,最后将优化设计应用于工程实践,确认优化设计具有较强的应用成效。 展开更多
关键词 采煤机 截割部 固有振动特性 动态响应特性 耦合动力学特性
下载PDF
空间机械臂的刚-柔耦合动力学研究 被引量:8
3
作者 刘锦阳 洪嘉振 《宇航学报》 EI CAS CSCD 北大核心 2002年第2期23-27,33,共6页
本文对作大范围运动的空间机械臂的刚 -柔耦合动力学特性进行了研究。从连续介质力学理论出发 ,在变形位移中计及了耦合变形量 ,用 Jourdain速度变分原理导出了作大范围运动的空间机械臂的动力学方程。分别用耦合模型和不计耦合变形量... 本文对作大范围运动的空间机械臂的刚 -柔耦合动力学特性进行了研究。从连续介质力学理论出发 ,在变形位移中计及了耦合变形量 ,用 Jourdain速度变分原理导出了作大范围运动的空间机械臂的动力学方程。分别用耦合模型和不计耦合变形量的零次近似模型计算了机械臂端点的变形位移 ,揭示了两种模型的动力学性质的差异。为了确定零次近似模型的适用范围 ,引入相关系数 ,仿真计算结果表明 ,零次近似模型仅适用于相关系数的最大值小于 0 . 展开更多
关键词 空间机械臂 刚-柔耦合动力学特性 相关系数 零次近似模型
下载PDF
COUPLED DYNAMIC CHARACTERISTICS AND CONTROL OF ROTOR-CONICAL MAGNETIC BEARING SYSTEM 被引量:1
4
作者 杨静 虞烈 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2004年第3期189-194,共6页
The coupled dynamic characteristics of the conical electromagnetic bearing are presented and their definitions are given. On the basis of the analyses of the characteristics, the dynamic model of five degrees of freed... The coupled dynamic characteristics of the conical electromagnetic bearing are presented and their definitions are given. On the basis of the analyses of the characteristics, the dynamic model of five degrees of freedom (five-DOF) rotor-conical electromagnetic bearing system is made, and the influence of the coupled characteristics on the system optimal controller is analyzed. 展开更多
关键词 conical electromagnetic bearing current coupling geometry coupling optimal controller
下载PDF
Combined effects of temperature and axial pressure on dynamic mechanical properties of granite 被引量:6
5
作者 Tu-bing YIN Rong-hua SHU +2 位作者 Xi-bing LI Pin WANG Long-jun DONG 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2016年第8期2209-2219,共11页
In order to get the dynamic mechanical properties of deep rock mass suffered both high temperature and high pressure,impact loading experiments on granite subjected to temperature and axial pressure were carried out. ... In order to get the dynamic mechanical properties of deep rock mass suffered both high temperature and high pressure,impact loading experiments on granite subjected to temperature and axial pressure were carried out. Furthermore, the internalstructure characteristics of granite under different temperatures were observed by scanning electron microscopy (SEM). The results show that the longitudinal wave velocity assumes a downward trend which shows a rapid drop before falling slowly as the temperature increases. The uniaxial compressive strength of the specimen decreases significantly at temperatures of 25?100 °C compared to that at temperatures of 100?300 °C. The peak strain rises rapidly before the dividing point of 100 °C, but increases slowly after the dividing point. The internal structure of the rock changes substantially as the temperature increases, such as the extension and transfixion of primary and newborn cracks. In addition, the thermal damage under axial pressure is greater than that described by the longitudinal wave velocity and the phenomenon shows obviously when the temperature increases. 展开更多
关键词 rock dynamics split Hopkincon pressure bar temperature pressure coupling dynamic mechanical properties
下载PDF
Controlling Entanglement Dynamics by Choosing Appropriate Ratio between Cavity-Fiber Coupling and Atom-Cavity Coupling
6
作者 廖长庚 杨贞标 +1 位作者 陈子翃 罗成立 《Communications in Theoretical Physics》 SCIE CAS CSCD 2010年第10期667-671,共5页
The entanglement characteristics including the so-called sudden death effect between two identical twolevel atoms trapped in two separate cavities connected by an optical fiber are studied. The results show that the t... The entanglement characteristics including the so-called sudden death effect between two identical twolevel atoms trapped in two separate cavities connected by an optical fiber are studied. The results show that the time evolution of entanglement is sensitive not only to the degree of entanglement of the initial state but also to the ratio between cavity-fiber coupling (v) and atom-cavity coupling (g). This means that the entanglement dynamics can be controlled by choosing specific v and ft. 展开更多
关键词 controlling entanglement dynamics CONCURRENCE fiber
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部