In order to control the cross? link forces and the vibration frequencies of the test bed of the full channel gas within the allowable ranges, the analyses of forces and deformation of the test bed was done, for the v...In order to control the cross? link forces and the vibration frequencies of the test bed of the full channel gas within the allowable ranges, the analyses of forces and deformation of the test bed was done, for the variously restrained elastic movable frame and the rigid one, the vibration frequencies were computed respectively by means of the methods of mechanics of materials, elasticity and vibration mechanics, the cross link forces and the vibration frequencies of the test bed were tested. The results of theoretical computation comparatively approach the experimental results. The computational methods could be used to availably estimate the design parameters relevant to the test bed of the full channel gas.展开更多
For a single-motor parallel hybrid electric vehicle, during mode transitions （especially the transition from electric drive mode to engine/parallel drive mode, which requires the clutch engagement）, the drivability ...For a single-motor parallel hybrid electric vehicle, during mode transitions （especially the transition from electric drive mode to engine/parallel drive mode, which requires the clutch engagement）, the drivability of the vehicle will be signifi- cantly affected by a clutch torque induced disturbance, driveline oscillations and jerks which can occur without adequate controls. To improve vehicle drivability during mode transitions for a single-motor parallel hybrid electric vehicle, two controllers are proposed. The first controller is the engine-side controller for engine cranking/starting and speed synchronization. The second controller is the motor-side controller for achieving a smooth mode transition with reduced driveline oscillations and jerks under the clutch torque induced disturbance and system uncertainties. The controllers are all composed of a feed-forward control and a robust feedback control. The robust controllers are designed by using the mu synthesis method. In the design process, control- oriented system models that take account of various parameter uncertainties and un-modeled dynamics are used. The results of the simulation demonstrate the effectiveness of the proposed control algorithms.展开更多
文摘In order to control the cross? link forces and the vibration frequencies of the test bed of the full channel gas within the allowable ranges, the analyses of forces and deformation of the test bed was done, for the variously restrained elastic movable frame and the rigid one, the vibration frequencies were computed respectively by means of the methods of mechanics of materials, elasticity and vibration mechanics, the cross link forces and the vibration frequencies of the test bed were tested. The results of theoretical computation comparatively approach the experimental results. The computational methods could be used to availably estimate the design parameters relevant to the test bed of the full channel gas.
基金Project supported by the International S&T Cooperation Program of China(No.2010DFA72760)
文摘For a single-motor parallel hybrid electric vehicle, during mode transitions （especially the transition from electric drive mode to engine/parallel drive mode, which requires the clutch engagement）, the drivability of the vehicle will be signifi- cantly affected by a clutch torque induced disturbance, driveline oscillations and jerks which can occur without adequate controls. To improve vehicle drivability during mode transitions for a single-motor parallel hybrid electric vehicle, two controllers are proposed. The first controller is the engine-side controller for engine cranking/starting and speed synchronization. The second controller is the motor-side controller for achieving a smooth mode transition with reduced driveline oscillations and jerks under the clutch torque induced disturbance and system uncertainties. The controllers are all composed of a feed-forward control and a robust feedback control. The robust controllers are designed by using the mu synthesis method. In the design process, control- oriented system models that take account of various parameter uncertainties and un-modeled dynamics are used. The results of the simulation demonstrate the effectiveness of the proposed control algorithms.
