Seven known dibenzocyclooctadiene lignans,tigloylgomisin P(1), angeloylgomisin P(2),gomisin A(3),Schizandrin(4),angeloylgomisin H(5),gomisin B(6) and R(+)-gomisin M_1(7)were isolated from Kadsura heteroclita.The confo...Seven known dibenzocyclooctadiene lignans,tigloylgomisin P(1), angeloylgomisin P(2),gomisin A(3),Schizandrin(4),angeloylgomisin H(5),gomisin B(6) and R(+)-gomisin M_1(7)were isolated from Kadsura heteroclita.The conformation of tiglolylgomisin P(1)was established by 2D NMR techniques.Using[~3H]platelet activating factor(PAF)binding to human platelet membrane assay,(1),(2)and(7)showed PAF receptor antagonistic activities.展开更多
The surface of ZrO2 nanoparticles was modified by styrene coupling grafting method to improve the dispersion and interaction of the nanoparticles with the epoxy coating in which the modified ZrO2 nanoparticles were us...The surface of ZrO2 nanoparticles was modified by styrene coupling grafting method to improve the dispersion and interaction of the nanoparticles with the epoxy coating in which the modified ZrO2 nanoparticles were used as an additive. The grafting performance and microstructure of the nano- ZrO2/epoxy coating were analyzed by Fourier transformation infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The corrosion behavior of the nano-ZrO2/epoxy coating on mild steel was evaluated in neutral 3.5 wt% NaC1 solution using electrochemical impedance spectroscopy （EIS）. Both the coating capacitance and coating resistance fitted by the equivalent circuit from EIS were used to evaluate the protective performance of the coating towards the mild steel. The results show a superior stability and efficient corrosion protection by the modified ZrO2 nanoparticles. The epoxy coating containing 2 wt% modified ZrO2 nanoparticles exhibited the best corrosion performance among all the coating specimens. This research may provide an insight into the protection of mild steel using modified epoxy coatings.展开更多
Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the pres...Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.展开更多
A series of 4,4＇-disubstituted-[2,2＇]-bipyridines, featuring electron withdrawing/donating functional groups such as amino, chloro, nitro, ethoxycarbonyl, carboxy, methyl, methoxy and hydroxymethyl, have been syn- t...A series of 4,4＇-disubstituted-[2,2＇]-bipyridines, featuring electron withdrawing/donating functional groups such as amino, chloro, nitro, ethoxycarbonyl, carboxy, methyl, methoxy and hydroxymethyl, have been syn- thesized and employed in the copolymerization of carbon monoxide （CO） and styrene. The available bipyridine and its derivatives were coordinated with palladium （ II ） acetate for catalyzing the copolymerization of CO and styrene, and the concomitant polyketone was characterized by means of t3C NMR, FTIR, differential scanning calo- rimetry （DSC） and element analysis techniques concerning its structure and thermal performance. The effect of dif- ferent electron-donating and electron-withdrawing groups on catalyst performance and molecular weight of co- polymer was studied under certain experimental condition. It has been proved that the enhancement of electron donating and conjugative effects on bipyridine ligand will not only improve the catalytic activity of the composi- tion, but also increase the molecular weight of the as-prepared polyketone. The catalytic activity is the highest in hydroxymethyl substituted 2,2＇-bipyridine ligand（l 356 gSTCO/（gPd · h））, when the molecular weight and polydispersity index of the polyketone are Mn = 8 502, Mw = 1 3440 and Mw/Mn = 1.581, respectively.展开更多
The morphological change of St/DVB crosslinked gels during chloromethylation wasstudied by fluorescence spectroscopy using St/DVB crosslinked and hypercrosslinked gels as controlsamples. It has been found that with in...The morphological change of St/DVB crosslinked gels during chloromethylation wasstudied by fluorescence spectroscopy using St/DVB crosslinked and hypercrosslinked gels as controlsamples. It has been found that with increase of chlorine content, the excimer emission band (~325nm)approaches to vanish, while the intensity of multi-ring aggregate emission band (~420nm) quicklyreaches a maximum, and then decreases sharply accompanied by appearance ofa new broad bandcentred at ca 488nm which roughly coincides with the typical emission band of hypercrossllinkedSt/DVB gels. Mearwhile, the result of IR measurement suggests that methylene bridge between phenylrings forms and increases with chloromethylation process. These results are explained in terms ofaside reaction of post-crosslinking, which densifies the loosely crosslinked networks and undoes thedensely entangled microgel nuclei. As a result, the morphology of the crosslinked gels becom es morehomogeneous with chloromethylation.展开更多
Ferrocenium monocations as photoinitiators for cationic photopolymerization suffer from a limitation of low absorption and low reactivity under high-pressure Hg lamp. Here, a ferrocenium dication salt, biphenyl bis [...Ferrocenium monocations as photoinitiators for cationic photopolymerization suffer from a limitation of low absorption and low reactivity under high-pressure Hg lamp. Here, a ferrocenium dication salt, biphenyl bis [π-cyclopentadienyl）iron] hexafluorophosphate （[bis（Cp-Fe）-biphenyl] （PF6）2 was synthesized by the ligand exchange reaction between ferrocene and biphenyl. The chemical structure was characterized with FTIR and ^1HNMR. The separation of ferrocenium monocation cyclopentadien-iron-biphenyl hexafluorophosphate （[Cp-Fe-biphenyl] PF6） and dication [bis（Cp-Fe）-biphenyl] （PF6）2 was carried out by column chromatography. The photoactivity of initiating photopolyinerization of epoxide ER14221 was studied as a cationic photoinitiator. [Bis（Cp-Fe）-biphenyl] （PF6）2 can efficiently absorb radiation above 300nm and its photoactivity is higher than that of its monocation.展开更多
Preparation of thermoplastic elastomer of Polypropylene-SIR 10 rubber blends with addition of DCP （dicumil peroxide） as initiator and DVB （divinylbenzene） as a crosslinker has been done. Blends of Polypropylene-SI...Preparation of thermoplastic elastomer of Polypropylene-SIR 10 rubber blends with addition of DCP （dicumil peroxide） as initiator and DVB （divinylbenzene） as a crosslinker has been done. Blends of Polypropylene-SIR 10 rubber with variation of weight 60/40 （w/w）, 50/50 （w/w） and 40/60 （w/w） with variation concentration of DCP and DVB 1 phr, 2 phr and 3 phr were mixed into internal mixer at temperature 180 ℃. Then, the blends were pressed at 185 ℃ and specimen were molded according to the ASTM D638. The characterization were carried out based on tensile strength testing, crosslink percentage, morphology surface analysis with SEM and fungtional group analysis with FTIR （Fourier Transform Infra Red）. The result showed that the blends of Polypropilene-SIR 10 rubber 60/40 （w/w） with 2 phr DCP and 1 phr DVB posses a higher tensile strength with value 1.37 Kgf/mm2 and value of elongation at break 17.58%, and value of percentage crosslink 82.4%. The result of morphology test with SEM showed that the blend was well homogenous. Spectra analysis with FT-IR has shown physical interaction among components of the blends.展开更多
Two kinds of St/DVB copolymer beeds containing (1 - pyrenyl) formyl and(1 -pyrenyl) methyl groups respectively have been synthesized by both functionalization and copolymerization. The fluorescence spectra of the swo...Two kinds of St/DVB copolymer beeds containing (1 - pyrenyl) formyl and(1 -pyrenyl) methyl groups respectively have been synthesized by both functionalization and copolymerization. The fluorescence spectra of the swollen polymers synthesized are similar in shape to those of the corresponding model compounds, whilethe intensity ratio of excimer to monomer shows clear dependence on the contents ofthe pyrene groups.展开更多
基金This project was supported by National Natural Science Foundation of China.
文摘Seven known dibenzocyclooctadiene lignans,tigloylgomisin P(1), angeloylgomisin P(2),gomisin A(3),Schizandrin(4),angeloylgomisin H(5),gomisin B(6) and R(+)-gomisin M_1(7)were isolated from Kadsura heteroclita.The conformation of tiglolylgomisin P(1)was established by 2D NMR techniques.Using[~3H]platelet activating factor(PAF)binding to human platelet membrane assay,(1),(2)and(7)showed PAF receptor antagonistic activities.
基金Supported by the National Department Public Benefit Research Foundation(No.201005028)the National Key Technology Research and Development Program during the Twelfth Five-Year Plan Period of China(No.2012BAB15B01)
文摘The surface of ZrO2 nanoparticles was modified by styrene coupling grafting method to improve the dispersion and interaction of the nanoparticles with the epoxy coating in which the modified ZrO2 nanoparticles were used as an additive. The grafting performance and microstructure of the nano- ZrO2/epoxy coating were analyzed by Fourier transformation infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The corrosion behavior of the nano-ZrO2/epoxy coating on mild steel was evaluated in neutral 3.5 wt% NaC1 solution using electrochemical impedance spectroscopy （EIS）. Both the coating capacitance and coating resistance fitted by the equivalent circuit from EIS were used to evaluate the protective performance of the coating towards the mild steel. The results show a superior stability and efficient corrosion protection by the modified ZrO2 nanoparticles. The epoxy coating containing 2 wt% modified ZrO2 nanoparticles exhibited the best corrosion performance among all the coating specimens. This research may provide an insight into the protection of mild steel using modified epoxy coatings.
基金Natural Science Foundation of Guangdong Province （No.05006556）.
文摘Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.
基金Supported by Tianjin Natural Science Foundation(No.07JCYBJC00600)
文摘A series of 4,4＇-disubstituted-[2,2＇]-bipyridines, featuring electron withdrawing/donating functional groups such as amino, chloro, nitro, ethoxycarbonyl, carboxy, methyl, methoxy and hydroxymethyl, have been syn- thesized and employed in the copolymerization of carbon monoxide （CO） and styrene. The available bipyridine and its derivatives were coordinated with palladium （ II ） acetate for catalyzing the copolymerization of CO and styrene, and the concomitant polyketone was characterized by means of t3C NMR, FTIR, differential scanning calo- rimetry （DSC） and element analysis techniques concerning its structure and thermal performance. The effect of dif- ferent electron-donating and electron-withdrawing groups on catalyst performance and molecular weight of co- polymer was studied under certain experimental condition. It has been proved that the enhancement of electron donating and conjugative effects on bipyridine ligand will not only improve the catalytic activity of the composi- tion, but also increase the molecular weight of the as-prepared polyketone. The catalytic activity is the highest in hydroxymethyl substituted 2,2＇-bipyridine ligand（l 356 gSTCO/（gPd · h））, when the molecular weight and polydispersity index of the polyketone are Mn = 8 502, Mw = 1 3440 and Mw/Mn = 1.581, respectively.
基金National Natural Scientific Foundation of China (Project grant No.29574165 29928003+1 种基金 29874019) National Natural Scientific Foundation of Tianjin (Project grant No.013604011)
文摘The morphological change of St/DVB crosslinked gels during chloromethylation wasstudied by fluorescence spectroscopy using St/DVB crosslinked and hypercrosslinked gels as controlsamples. It has been found that with increase of chlorine content, the excimer emission band (~325nm)approaches to vanish, while the intensity of multi-ring aggregate emission band (~420nm) quicklyreaches a maximum, and then decreases sharply accompanied by appearance ofa new broad bandcentred at ca 488nm which roughly coincides with the typical emission band of hypercrossllinkedSt/DVB gels. Mearwhile, the result of IR measurement suggests that methylene bridge between phenylrings forms and increases with chloromethylation process. These results are explained in terms ofaside reaction of post-crosslinking, which densifies the loosely crosslinked networks and undoes thedensely entangled microgel nuclei. As a result, the morphology of the crosslinked gels becom es morehomogeneous with chloromethylation.
基金Supported by the National Natural Science Foundation of China （20676012）.
文摘Ferrocenium monocations as photoinitiators for cationic photopolymerization suffer from a limitation of low absorption and low reactivity under high-pressure Hg lamp. Here, a ferrocenium dication salt, biphenyl bis [π-cyclopentadienyl）iron] hexafluorophosphate （[bis（Cp-Fe）-biphenyl] （PF6）2 was synthesized by the ligand exchange reaction between ferrocene and biphenyl. The chemical structure was characterized with FTIR and ^1HNMR. The separation of ferrocenium monocation cyclopentadien-iron-biphenyl hexafluorophosphate （[Cp-Fe-biphenyl] PF6） and dication [bis（Cp-Fe）-biphenyl] （PF6）2 was carried out by column chromatography. The photoactivity of initiating photopolyinerization of epoxide ER14221 was studied as a cationic photoinitiator. [Bis（Cp-Fe）-biphenyl] （PF6）2 can efficiently absorb radiation above 300nm and its photoactivity is higher than that of its monocation.
文摘Preparation of thermoplastic elastomer of Polypropylene-SIR 10 rubber blends with addition of DCP （dicumil peroxide） as initiator and DVB （divinylbenzene） as a crosslinker has been done. Blends of Polypropylene-SIR 10 rubber with variation of weight 60/40 （w/w）, 50/50 （w/w） and 40/60 （w/w） with variation concentration of DCP and DVB 1 phr, 2 phr and 3 phr were mixed into internal mixer at temperature 180 ℃. Then, the blends were pressed at 185 ℃ and specimen were molded according to the ASTM D638. The characterization were carried out based on tensile strength testing, crosslink percentage, morphology surface analysis with SEM and fungtional group analysis with FTIR （Fourier Transform Infra Red）. The result showed that the blends of Polypropilene-SIR 10 rubber 60/40 （w/w） with 2 phr DCP and 1 phr DVB posses a higher tensile strength with value 1.37 Kgf/mm2 and value of elongation at break 17.58%, and value of percentage crosslink 82.4%. The result of morphology test with SEM showed that the blend was well homogenous. Spectra analysis with FT-IR has shown physical interaction among components of the blends.
文摘Two kinds of St/DVB copolymer beeds containing (1 - pyrenyl) formyl and(1 -pyrenyl) methyl groups respectively have been synthesized by both functionalization and copolymerization. The fluorescence spectra of the swollen polymers synthesized are similar in shape to those of the corresponding model compounds, whilethe intensity ratio of excimer to monomer shows clear dependence on the contents ofthe pyrene groups.
