In the present study, the aptitudes of acrylamide grafted cellulose to remove Cu（Ⅱ） ions from aqueous solutions were investigated. The preparation process was carried out through graft copolymerization of acrylamid...In the present study, the aptitudes of acrylamide grafted cellulose to remove Cu（Ⅱ） ions from aqueous solutions were investigated. The preparation process was carried out through graft copolymerization of acrylamide onto cellulose, using ceric ammonium nitrate as an initiator. Fourier transform Infrared spectroscopy was used to confirm and characterization poly acrylamide-grafted cellulose formation. Batch experiments of Cu（Ⅱ） ions adsorption on the grafted cellulose adsorbent were performed. Effects of initial pH of the solution, contact time and initial Cu（Ⅱ） concentration on the adsorption of Cu（Ⅱ） were studied. The maximum adsorption of Cu（Ⅱ） ion on grafted cellulose is observed 90 mg/g at the initial pH of 6. Equilibrium time was reached within 3h. Kinetic data were analyzed using the pseudo-first-order, pseudo-second-order equations. The data fitted very well to the pseudo-second-order rate expression. The equilibrium data for adsorption isotherms of these metal ions on grafted cellulose were obtained using the Langmuir and Freundlich models and the Langmuir model was obtained to be in better correlation with the experimental data. The results showed that acrylamide-g-cellulose developed in this study could be an economical and effective adsorbent for application in removal of copper ion from water and waste waters.展开更多
The separate-layer injection in different interlayers and the injection of the same-molecular-weight polymer so- lution in a layer are necessary in the polymer flooding process because of heterogeneous multilayer sand...The separate-layer injection in different interlayers and the injection of the same-molecular-weight polymer so- lution in a layer are necessary in the polymer flooding process because of heterogeneous multilayer sandstone reservoirs in EOR projects. To alleviate the matching problems between the layer permeability and the injected polymer molecular weight, a molecular weight adjusting device with porous medium was designed on the basis of mechanical degradation principle. In terms of four variables （polymer concentration, pore diameter, length of shear component and flow rate ）, the theological behavior of hydrolyzed polyacrylamide （HPAM） solu- tion flowing through the device was investigated in detail. The change of these variables is able to control the shear rate of HPAM solutions through ceramic foam, and achieve the desired degree of shear degradation and the final theological parameters-viscosity loss, viscoelasticity and pressure drop. Therefore, a linear relationship between viscosity loss and shearing rate was established so as to obtain the targeted viscosity easily. Field tests in the Daqing Oil Field showed that the polymer molecular weight could drop 20% to 50%. In a word, the results could guide the industrial application of the novel device and the further study of polymer degradation flowing through the porous medium.展开更多
A hydrophilic radical polymer, poly（2,2,6,6-teteramethylpiperidinyloxyl-4-yl acrylamide） （PTAm）, was synthesized via oxidation of the corresponding precursor polymer, poly（2,2,6,6-teteramethylpiperidine-4-yl acry...A hydrophilic radical polymer, poly（2,2,6,6-teteramethylpiperidinyloxyl-4-yl acrylamide） （PTAm）, was synthesized via oxidation of the corresponding precursor polymer, poly（2,2,6,6-teteramethylpiperidine-4-yl acrylamide）. Electrochemical properties of the PTAm layer were characterized in three aqueous electrolytes of sodium chloride （NaCl）, sodium tetrafluoroborate （NaBF4）, and sodium hexafluorophosphate （NaPF6） to optimize its activity as an organic cathode. The counter anion species significantly affected the capacity and the cycle performance of the PTAm layer. The PTAm layer in the presence of BF4？ displayed quantitative redox capacity beyond 1 μm layer thickness and maintained the discharging capacity of 110 mAh g-1 （97% vs. the calculated capacity） even after 1000 cycle charging/discharging, which could be ascribed to its appropriate affinity to the aqueous electrolyte without any dissolution into the electrolyte. A totally organic-based rechargeable cell was fabricated using PTAm and poly（N-4,4＇-bipyridinium-N-decamethylene dibromide） as the cathode and the anode, respectively, and the aqueous electrolyte of NaBF4. The cell gave a plateau voltage at 1.2 V both on charging and discharging and an excellent charging/discharging cyclability of ＆gt;2000 with high coulombic efficiency of ＆gt;95%.展开更多
文摘In the present study, the aptitudes of acrylamide grafted cellulose to remove Cu（Ⅱ） ions from aqueous solutions were investigated. The preparation process was carried out through graft copolymerization of acrylamide onto cellulose, using ceric ammonium nitrate as an initiator. Fourier transform Infrared spectroscopy was used to confirm and characterization poly acrylamide-grafted cellulose formation. Batch experiments of Cu（Ⅱ） ions adsorption on the grafted cellulose adsorbent were performed. Effects of initial pH of the solution, contact time and initial Cu（Ⅱ） concentration on the adsorption of Cu（Ⅱ） were studied. The maximum adsorption of Cu（Ⅱ） ion on grafted cellulose is observed 90 mg/g at the initial pH of 6. Equilibrium time was reached within 3h. Kinetic data were analyzed using the pseudo-first-order, pseudo-second-order equations. The data fitted very well to the pseudo-second-order rate expression. The equilibrium data for adsorption isotherms of these metal ions on grafted cellulose were obtained using the Langmuir and Freundlich models and the Langmuir model was obtained to be in better correlation with the experimental data. The results showed that acrylamide-g-cellulose developed in this study could be an economical and effective adsorbent for application in removal of copper ion from water and waste waters.
基金Supported by the Program for Yangtse River Scholars and Innovative Research Terms in Universities(IRT0936)the National Basic Research Program of China(2009CB219905+2 种基金2009CB219907)the Daqing Oilfield Co.Ltd
文摘The separate-layer injection in different interlayers and the injection of the same-molecular-weight polymer so- lution in a layer are necessary in the polymer flooding process because of heterogeneous multilayer sandstone reservoirs in EOR projects. To alleviate the matching problems between the layer permeability and the injected polymer molecular weight, a molecular weight adjusting device with porous medium was designed on the basis of mechanical degradation principle. In terms of four variables （polymer concentration, pore diameter, length of shear component and flow rate ）, the theological behavior of hydrolyzed polyacrylamide （HPAM） solu- tion flowing through the device was investigated in detail. The change of these variables is able to control the shear rate of HPAM solutions through ceramic foam, and achieve the desired degree of shear degradation and the final theological parameters-viscosity loss, viscoelasticity and pressure drop. Therefore, a linear relationship between viscosity loss and shearing rate was established so as to obtain the targeted viscosity easily. Field tests in the Daqing Oil Field showed that the polymer molecular weight could drop 20% to 50%. In a word, the results could guide the industrial application of the novel device and the further study of polymer degradation flowing through the porous medium.
基金supported by Grants-in-Aid for Scientific Research (19105003)Global COE Program at Waseda University from MEXT, JapanResearch Project "Radical Polymers" at Advanced Research Institute for Science & Engineering, Waseda University
文摘A hydrophilic radical polymer, poly（2,2,6,6-teteramethylpiperidinyloxyl-4-yl acrylamide） （PTAm）, was synthesized via oxidation of the corresponding precursor polymer, poly（2,2,6,6-teteramethylpiperidine-4-yl acrylamide）. Electrochemical properties of the PTAm layer were characterized in three aqueous electrolytes of sodium chloride （NaCl）, sodium tetrafluoroborate （NaBF4）, and sodium hexafluorophosphate （NaPF6） to optimize its activity as an organic cathode. The counter anion species significantly affected the capacity and the cycle performance of the PTAm layer. The PTAm layer in the presence of BF4？ displayed quantitative redox capacity beyond 1 μm layer thickness and maintained the discharging capacity of 110 mAh g-1 （97% vs. the calculated capacity） even after 1000 cycle charging/discharging, which could be ascribed to its appropriate affinity to the aqueous electrolyte without any dissolution into the electrolyte. A totally organic-based rechargeable cell was fabricated using PTAm and poly（N-4,4＇-bipyridinium-N-decamethylene dibromide） as the cathode and the anode, respectively, and the aqueous electrolyte of NaBF4. The cell gave a plateau voltage at 1.2 V both on charging and discharging and an excellent charging/discharging cyclability of ＆gt;2000 with high coulombic efficiency of ＆gt;95%.
