An efficient porous spherical polyethyleneimine-cellulose （PEI-cell） absorbent was synthesized and char- acterized. The main influencing factors and adsorption mechanism for two typical metal ions, Cr3＋ and Fe3＋, ...An efficient porous spherical polyethyleneimine-cellulose （PEI-cell） absorbent was synthesized and char- acterized. The main influencing factors and adsorption mechanism for two typical metal ions, Cr3＋ and Fe3＋, were investigated. The adsorption performance primarily depends on the initial concentration of metal ions, pH value and temperature, and the chelation action between N atoms of PEl-cell and metal ions plays an important role. Under dynamic adsorption conditions, the saturation adsorption of polyethyleneimine-cellulose is 83.98 mg.g-1 for Cr（Ⅲ） and 377.19 mg-g-1 for Fe（Ⅲ）, higher than report- ed data and that of unmodified cellulose. The adsorption can be well described with second-order kinetic equation and Freundlich adsorption model, and AH, AG and 5 of the adsorption are all negative. With 5% HCI as eluent, the elution ratio of Cr（Ill） and Fe（llI） achieved 99.88% and 97.74% at 313 K, respectively. After the porous PEI-cell was reused 6 times, it still presented satisfactory adsorption performance. Above results show the advantages such as easily-acquired raw material, high efficiency, stable recycling oerformance and biodegradability.展开更多
We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphol...We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphology, structure, composition of the product have been inves- tigated with the X-ray photoelectron spectrum, scanning electron microscope, transmission electron microscope, and energy-dispersive spectroscopy. Tile overall morphologies could be controlled to shift from a characteristic network of flower-like silica sphere to a sheet-like structure by adjusting physical adsorption of different amount of polyethyleneimine onto the surface of the CaCO3 microparticles.展开更多
基金Supported by the National Natural Science Foundation of China(81373284,81102344)the Project of Education Department in Sichuan(14ZB0267)the Bureau of Science and Technology of Mianyang City of China(10Y003-8)
文摘An efficient porous spherical polyethyleneimine-cellulose （PEI-cell） absorbent was synthesized and char- acterized. The main influencing factors and adsorption mechanism for two typical metal ions, Cr3＋ and Fe3＋, were investigated. The adsorption performance primarily depends on the initial concentration of metal ions, pH value and temperature, and the chelation action between N atoms of PEl-cell and metal ions plays an important role. Under dynamic adsorption conditions, the saturation adsorption of polyethyleneimine-cellulose is 83.98 mg.g-1 for Cr（Ⅲ） and 377.19 mg-g-1 for Fe（Ⅲ）, higher than report- ed data and that of unmodified cellulose. The adsorption can be well described with second-order kinetic equation and Freundlich adsorption model, and AH, AG and 5 of the adsorption are all negative. With 5% HCI as eluent, the elution ratio of Cr（Ill） and Fe（llI） achieved 99.88% and 97.74% at 313 K, respectively. After the porous PEI-cell was reused 6 times, it still presented satisfactory adsorption performance. Above results show the advantages such as easily-acquired raw material, high efficiency, stable recycling oerformance and biodegradability.
文摘We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphology, structure, composition of the product have been inves- tigated with the X-ray photoelectron spectrum, scanning electron microscope, transmission electron microscope, and energy-dispersive spectroscopy. Tile overall morphologies could be controlled to shift from a characteristic network of flower-like silica sphere to a sheet-like structure by adjusting physical adsorption of different amount of polyethyleneimine onto the surface of the CaCO3 microparticles.
