Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diam...Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.展开更多
The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic...The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic acid） （PAA） can be controlled by the monomer concentration, absorbed dose, and dose rate under an optimal inhibitor concentration of [Fe2＋]=18 mmol/L. SEM observation showed that the macroporous structure in ePTFE films would be covered gradually with the increase of the DG of PAA. The prepared ePTFE-g-PAA film was im- mersed in a neutral silver nitrate solution to fabricate an ePTFE-g-PAA/Ag hybrid film after the addition of NaBH4 as a reduction agent of Ag＋ to Ag atom. SEM, XRD, and XPS results proved that Ag nanoparticles with a size of several tens of nanometers to 100 nanometers were in situ immobilized on ePTFE film. The loading capacity of Ag nanoparticles could be tuned by the DG of PAA, and determined by thermal gravimetric analysis. The quart- titative antibacterial activity of the obtained ePTFE-g-PAA/Ag hybrid films was measured using counting plate method. It can kill all the Escherichia coli in the suspension in 1 h. Moreover, this excellent antibacterial activity can last at least for 4 h. This work provides a facile and practical way to make ePTFE meet the demanding antimicrobial requirement in more and more practical application areas.展开更多
A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size an...A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were actually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.展开更多
A stable silica sol with 3-5 nm in diameter, which can form homogeneous film without crack, was prepared and characterized. Then, the inorganic-organic hybrid aqueous dispersion composed of such a silica sol and an em...A stable silica sol with 3-5 nm in diameter, which can form homogeneous film without crack, was prepared and characterized. Then, the inorganic-organic hybrid aqueous dispersion composed of such a silica sol and an emulsion of styrene （St） and acrylate （Ac） copolymer was prepared and the hybrid effect between the silica sol and poly（St-co-Ac） was observed by Fourier transform infra-red （FT-IR） spectroscope. The toughness of the film prepared by this kind of hybrid aqueous dispersion was excellent, as it was enhanced appreciably by commixing with a small amount of poly（St-co-Ac） emulsion. Some amino-polysiloxane modified hybrid aqueous dispersions were also prepared and the properties of the modified dispersions and their films were investigated. The experimental results showed that the film prepared with such an amino-polysiloxane modified hybrid dispersion exhibited excellent hydrophobicity and low surface energy after heat treatment for 1.5 h, during which the formation of the graft copolymer was observed. The surface energy of this film decreases as a result of the enrichment of siloxane segments on the film surface.展开更多
A series of poly(vinyl acetate-co-acrylamide)copolymers with different mole ratios of vinyl acetate to acrylamide units were synthesized by emulsion polymerization for investigating the influences of copolymer composi...A series of poly(vinyl acetate-co-acrylamide)copolymers with different mole ratios of vinyl acetate to acrylamide units were synthesized by emulsion polymerization for investigating the influences of copolymer composition upon the performance such as apparent viscosity,film behaviors,and adhesion capacity to fibers for warp sizing operation.The mole ratios of vinyl acetate to acrylamide were varied from 0 to 4.By using an impregnated roving method,the adhesion was evaluated in terms of the maximal strength and work to break of a slightly sized roving.The film behaviors included breaking strength,breaking elongation,solution time and hygroscopic capacity.It was found that the viscosity,adhesion capability,glass transition temperature and film behaviors of the copolymeric sizing agent strongly depended on the mole ratio.Excessively increasing the amounts of vinyl acetate or acrylamide units incorporated into the copolymeric chains damages much of the performance.A favorable mole ratio of vinyl acetate or acrylamide was found to be 45∶55.Based on this mole ratio,the adhesion capability and film behaviors of the sizing agent reach their maximal values simultaneously.This demonstrates that the sizing agent should be synthesized under this copolymer composition from the viewpoint of adhesion and film behaviors.展开更多
The remote interaction of polymethacrylic acid hydrogel with a poly-2-methyl-5-vinylpyridine hydrogel was studied. The aim of work was to study the dependence of the swelling coefficient, the conductivity and the pH o...The remote interaction of polymethacrylic acid hydrogel with a poly-2-methyl-5-vinylpyridine hydrogel was studied. The aim of work was to study the dependence of the swelling coefficient, the conductivity and the pH of the water solutions of intergel system at different mass ratios from time were studied. The goal was achieved by using following methods： pH-metry, conductometry and gravimetry.展开更多
A very mild and extremely efficient hydrolysis method for transformation of polystyrene-b-poly(tert-butyl acrylate) (PS-b-PtBA) to polystyrene-b-poly(acrylic acid) (PS-b-PAA) was designed and carried out using more co...A very mild and extremely efficient hydrolysis method for transformation of polystyrene-b-poly(tert-butyl acrylate) (PS-b-PtBA) to polystyrene-b-poly(acrylic acid) (PS-b-PAA) was designed and carried out using more convenient and inexpensive chlorotrimethylsilane/sodium iodide as reagents. The hydrolysis product can self-assemble in aqueous media to give regular micelles with PS block forming the core and PAA block forming the corona, or in tetrahydrofuran (THF) to give reverse micelles with the hydrophilic block in the core.展开更多
Fe3O4/P （NaUA-St-BA） core-shell composite micro spheres were in situ prepared by soapless polymerization of styrene and butyl acrylate, with Fe3O4magnetic colloidal particles coated with NaUA. The results of IR and ...Fe3O4/P （NaUA-St-BA） core-shell composite micro spheres were in situ prepared by soapless polymerization of styrene and butyl acrylate, with Fe3O4magnetic colloidal particles coated with NaUA. The results of IR and XRD analysis demonstrated that the desired polymer chains have been covalently bonded to the surface of Fe3O4 nano particles. The morphology analysis by TEM confirmed that the composite particles have the core-shell structure and a relatively uniform diameter of about 100nm. The magnetic properties of the obtained composite latex particles were measured by VSM and found that they exhibited super paramagnetic properties. Finally, the prepared magnetic composite particles latex is stable for several months.展开更多
Poly(styrene-glycidyl methacrylate) particles having bowl-shaped hollow structures were synthesized by swollen seed emulsion polymerization. The PS emulsion synthesized through soap-free emulsion polymerization was sw...Poly(styrene-glycidyl methacrylate) particles having bowl-shaped hollow structures were synthesized by swollen seed emulsion polymerization. The PS emulsion synthesized through soap-free emulsion polymerization was swollen by toluene, and then the mixture of second monomers was added under polymerization condition. So a thin shell of poly(styrene-glycidyl methacrylate) cross-linked by triethylene glycol diacrylate was formed around the swollen PS particle. The bowl-shaped particles were obtained after the collapsing of the thin shell when the toluene emanated from the particles, but the shapes were effected by the degrees of cross-linking. The shape of the particles was observed by SEM. The release behavior of solvent from the particles was examined by TG.展开更多
基金Projects (11KJB530002, CX10B-259Z) supported by Research Funds from Jiangsu Provincial Department of Education, ChinaProject (10zxfk35) supported by Sichuan Province Nonmetallic Composites and Functional Materials Key Laboratory Project, China
文摘Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.
文摘The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic acid） （PAA） can be controlled by the monomer concentration, absorbed dose, and dose rate under an optimal inhibitor concentration of [Fe2＋]=18 mmol/L. SEM observation showed that the macroporous structure in ePTFE films would be covered gradually with the increase of the DG of PAA. The prepared ePTFE-g-PAA film was im- mersed in a neutral silver nitrate solution to fabricate an ePTFE-g-PAA/Ag hybrid film after the addition of NaBH4 as a reduction agent of Ag＋ to Ag atom. SEM, XRD, and XPS results proved that Ag nanoparticles with a size of several tens of nanometers to 100 nanometers were in situ immobilized on ePTFE film. The loading capacity of Ag nanoparticles could be tuned by the DG of PAA, and determined by thermal gravimetric analysis. The quart- titative antibacterial activity of the obtained ePTFE-g-PAA/Ag hybrid films was measured using counting plate method. It can kill all the Escherichia coli in the suspension in 1 h. Moreover, this excellent antibacterial activity can last at least for 4 h. This work provides a facile and practical way to make ePTFE meet the demanding antimicrobial requirement in more and more practical application areas.
基金Supported by the National "863" Project (No. 2001 AA 320206)and Shanghai Nano Special Foundation(No. 0120nm034).
文摘A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were actually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.
基金Supported by Science and Technology Commission of Shanghai Municipality (No. 0212nm008).
文摘A stable silica sol with 3-5 nm in diameter, which can form homogeneous film without crack, was prepared and characterized. Then, the inorganic-organic hybrid aqueous dispersion composed of such a silica sol and an emulsion of styrene （St） and acrylate （Ac） copolymer was prepared and the hybrid effect between the silica sol and poly（St-co-Ac） was observed by Fourier transform infra-red （FT-IR） spectroscope. The toughness of the film prepared by this kind of hybrid aqueous dispersion was excellent, as it was enhanced appreciably by commixing with a small amount of poly（St-co-Ac） emulsion. Some amino-polysiloxane modified hybrid aqueous dispersions were also prepared and the properties of the modified dispersions and their films were investigated. The experimental results showed that the film prepared with such an amino-polysiloxane modified hybrid dispersion exhibited excellent hydrophobicity and low surface energy after heat treatment for 1.5 h, during which the formation of the graft copolymer was observed. The surface energy of this film decreases as a result of the enrichment of siloxane segments on the film surface.
基金The Foundation of Talented Persons in Anhui Province(No.2002Z036)
文摘A series of poly(vinyl acetate-co-acrylamide)copolymers with different mole ratios of vinyl acetate to acrylamide units were synthesized by emulsion polymerization for investigating the influences of copolymer composition upon the performance such as apparent viscosity,film behaviors,and adhesion capacity to fibers for warp sizing operation.The mole ratios of vinyl acetate to acrylamide were varied from 0 to 4.By using an impregnated roving method,the adhesion was evaluated in terms of the maximal strength and work to break of a slightly sized roving.The film behaviors included breaking strength,breaking elongation,solution time and hygroscopic capacity.It was found that the viscosity,adhesion capability,glass transition temperature and film behaviors of the copolymeric sizing agent strongly depended on the mole ratio.Excessively increasing the amounts of vinyl acetate or acrylamide units incorporated into the copolymeric chains damages much of the performance.A favorable mole ratio of vinyl acetate or acrylamide was found to be 45∶55.Based on this mole ratio,the adhesion capability and film behaviors of the sizing agent reach their maximal values simultaneously.This demonstrates that the sizing agent should be synthesized under this copolymer composition from the viewpoint of adhesion and film behaviors.
文摘The remote interaction of polymethacrylic acid hydrogel with a poly-2-methyl-5-vinylpyridine hydrogel was studied. The aim of work was to study the dependence of the swelling coefficient, the conductivity and the pH of the water solutions of intergel system at different mass ratios from time were studied. The goal was achieved by using following methods： pH-metry, conductometry and gravimetry.
基金National Natural Scientific Foundation of China. (Project grant No. 29936100)
文摘A very mild and extremely efficient hydrolysis method for transformation of polystyrene-b-poly(tert-butyl acrylate) (PS-b-PtBA) to polystyrene-b-poly(acrylic acid) (PS-b-PAA) was designed and carried out using more convenient and inexpensive chlorotrimethylsilane/sodium iodide as reagents. The hydrolysis product can self-assemble in aqueous media to give regular micelles with PS block forming the core and PAA block forming the corona, or in tetrahydrofuran (THF) to give reverse micelles with the hydrophilic block in the core.
文摘Fe3O4/P （NaUA-St-BA） core-shell composite micro spheres were in situ prepared by soapless polymerization of styrene and butyl acrylate, with Fe3O4magnetic colloidal particles coated with NaUA. The results of IR and XRD analysis demonstrated that the desired polymer chains have been covalently bonded to the surface of Fe3O4 nano particles. The morphology analysis by TEM confirmed that the composite particles have the core-shell structure and a relatively uniform diameter of about 100nm. The magnetic properties of the obtained composite latex particles were measured by VSM and found that they exhibited super paramagnetic properties. Finally, the prepared magnetic composite particles latex is stable for several months.
文摘Poly(styrene-glycidyl methacrylate) particles having bowl-shaped hollow structures were synthesized by swollen seed emulsion polymerization. The PS emulsion synthesized through soap-free emulsion polymerization was swollen by toluene, and then the mixture of second monomers was added under polymerization condition. So a thin shell of poly(styrene-glycidyl methacrylate) cross-linked by triethylene glycol diacrylate was formed around the swollen PS particle. The bowl-shaped particles were obtained after the collapsing of the thin shell when the toluene emanated from the particles, but the shapes were effected by the degrees of cross-linking. The shape of the particles was observed by SEM. The release behavior of solvent from the particles was examined by TG.
