The construction of novel inorganic‐organic hybrid nanomaterials for synchronous photocatalyticremoval of heavy metal ions and organic pollutants has received significant attention.We successfullysynthesized gold‐lo...The construction of novel inorganic‐organic hybrid nanomaterials for synchronous photocatalyticremoval of heavy metal ions and organic pollutants has received significant attention.We successfullysynthesized gold‐loaded graphene oxide/PDPB(polymer poly(diphenylbutadiyne))composites(Au‐GO/PDPB)through a facile mechanical agitation and photoreduction method.The compositeswere characterized by XPS and TEM images,which confirmed the presence of GO and Au nanoparticleson the PDPB.The as‐prepared Au‐GO/PDPB composites displayed enhanced photocatalytic activity compared with that of pure PDPB for the synchronous photoreduction of hexavalent chromium(Cr(VI))and photo‐oxidation of phenol.We also determined the optimal loading mass of GO and Au nanoparticles on the PDPB;the Au1‐GO2/PDPB(2.0wt%GO and1.0wt%Au)composite displayed the best photocatalytic activity among all the catalysts.Our study provides a facile way to prepare inorganic‐organic composites for the synchronous photocatalytic removal of heavy metal ions and organic pollutants.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.展开更多
We report a hydrogen-evolution dimerization of styrenes via the synergistic merger of Acr＋-Mes photocatalyst and cobaloxime proton reduction catalysts. By utilizing this dual catalyst system, 1,2-dihydro-1-arylnaphth...We report a hydrogen-evolution dimerization of styrenes via the synergistic merger of Acr＋-Mes photocatalyst and cobaloxime proton reduction catalysts. By utilizing this dual catalyst system, 1,2-dihydro-1-arylnaphthalene derivatives can be directly constructed from commercially available styrenes. Our reaction proceeds smoothly under mild conditions without the need for oxidants or hydrogen atom transfer reagents, and the sole byproduct is hydrogen gas. Mechanistic investigation suggests that the reaction is initiated by photoinduced electron transfer under visible-light irradiation.展开更多
The adsorption of 2,4-dinitrophenol and 2.6-dinitrophenol on non-polar and polar adsorbents was studied. The results showed that the equilibrium adsorption did not comply with the Langmuir equation and was not mono-la...The adsorption of 2,4-dinitrophenol and 2.6-dinitrophenol on non-polar and polar adsorbents was studied. The results showed that the equilibrium adsorption did not comply with the Langmuir equation and was not mono-layer absorption. It is of interest to notice that the effect of pH on the adsorption of 2.4-or 2,6-dinitrophenol onto ADS-7 and ADS-21 was very small. The result is explained by hydrogen bonding interaction between 2, 4- or 2. 6-dinitrophenol and the adsorbent ADS21. The large adsorption capacity of dinitrophenol onto ADS-21, which was about 500 mg/g at an equilibrium concentration of 400 mg/L. and the small dinitrophenol leakage in the effluent from ADS- 21 column presented a good prospect for treatment of wastewater containing dinitrophenol with absorbent ADS-21.展开更多
Poly（m-xylylene adipamide）/poly（ethylene terephthalate）（MXD6/PET） copolymers are synthesized by melt copolycondensation with 1–5 wt% low molecular weight PET oligomers into the MXD6 oligomers at 260 ℃.FR-IR an...Poly（m-xylylene adipamide）/poly（ethylene terephthalate）（MXD6/PET） copolymers are synthesized by melt copolycondensation with 1–5 wt% low molecular weight PET oligomers into the MXD6 oligomers at 260 ℃.FR-IR and1 H NMR analysis results indicate that the interchange reaction has occurred between MXD6 oligomers and PET oligomers. The thermal behavior of copolymers shows that the melting temperature of MXD6/PET copolymers decreases with the increasing of amount of PET oligomers, while the crystallization temperature accordingly increases. And the equilibrium temperature Tm0 is evaluated to be 251.8 ℃ for the copolymers with5 wt% PET oligomer adding, which is very close to that of neat MXD6. The tensile and impact strength of MXD6/PET copolymers are significantly improved than that of pure MXD6 by mechanical properties test, and the microfibril structure in the impact fracture sample＇s surface reveals the feature of ductile fracture.展开更多
Toluene degradation performances were studied in a 10 L Two-Phase Partitioning Bioreactor(TPPB).The liquid phase consisted of a mixture of water and PDMS 50(Poly Di Methyl Siloxane,i.e.silicone oil,viscosity of 46 m P...Toluene degradation performances were studied in a 10 L Two-Phase Partitioning Bioreactor(TPPB).The liquid phase consisted of a mixture of water and PDMS 50(Poly Di Methyl Siloxane,i.e.silicone oil,viscosity of 46 m Pa·s) in the volume ratio of 75%/25%.Two series of experiments were carried out:in the first,the reactor was sequentially supplied with toluene whereas in the second,toluene was continuously supplied.Activated sludge from the wastewater treatment plant of Beaurade(Rennes,France) was used at an initial concentration of 0.5 dry mass g·(mixture L)^(-1).The elimination capacity(EC) was investigated as well as the change in biomass concentration over time.Toluene biodegradation was very ef ficient(removal ef ficiency,RE=100%) for toluene flows ranging from 0.2 to 1.2 ml·h^(-1),corresponding to elimination capacities of up to 104 g·m^(-3)·h^(-1).For a toluene flow of 1.2 ml·h^(-1),the biomass concentration measured at the end of the experiment was 4.7 dry mass g·(mixture L)^(-1).The oxygen concentration in the liquid phase was clearly not a limiting factor in these operating conditions.Based on these results,an extrapolation leading to the design of a large-scale pilot TPPB can now be considered to study toluene degradation performances in industrial conditions.展开更多
Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw mat...Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw material, a new polyurethane elastic body can be made through prepolymerization. After measurement of the moisture permeability, adsorption quantity and mechanical properties of the membrane made with the elastic body, we also proofed its formula by infrared spectroscopy. The result showed that the moisture permeability of the membrane, with a certain intelligent thermotropic quality, will increase by 3 to 4 times when the temperature is between 25℃-45℃.展开更多
基金supported by the National Natural Science Foundation of China(21577036,21377038,21237003,21677048)the National Basic Research Program of China(973 Program,2013CB632403)+1 种基金State Key Research Development Program of China(2016YFA0204200)the Fundamental Research Funds for the Central Universities(22A201514021)~~
文摘The construction of novel inorganic‐organic hybrid nanomaterials for synchronous photocatalyticremoval of heavy metal ions and organic pollutants has received significant attention.We successfullysynthesized gold‐loaded graphene oxide/PDPB(polymer poly(diphenylbutadiyne))composites(Au‐GO/PDPB)through a facile mechanical agitation and photoreduction method.The compositeswere characterized by XPS and TEM images,which confirmed the presence of GO and Au nanoparticleson the PDPB.The as‐prepared Au‐GO/PDPB composites displayed enhanced photocatalytic activity compared with that of pure PDPB for the synchronous photoreduction of hexavalent chromium(Cr(VI))and photo‐oxidation of phenol.We also determined the optimal loading mass of GO and Au nanoparticles on the PDPB;the Au1‐GO2/PDPB(2.0wt%GO and1.0wt%Au)composite displayed the best photocatalytic activity among all the catalysts.Our study provides a facile way to prepare inorganic‐organic composites for the synchronous photocatalytic removal of heavy metal ions and organic pollutants.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.
基金supported by the Ministry of Science and Technology of China (2014CB239402, 2017YFA0206903)the National Natural Science foundation of China (21390404)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Science (XDB17000000)the Key Research Pro-gram of Frontier Sciences, the Chinese Academy of Sciences (QYZDY-SSW-JSC029)~~
文摘We report a hydrogen-evolution dimerization of styrenes via the synergistic merger of Acr＋-Mes photocatalyst and cobaloxime proton reduction catalysts. By utilizing this dual catalyst system, 1,2-dihydro-1-arylnaphthalene derivatives can be directly constructed from commercially available styrenes. Our reaction proceeds smoothly under mild conditions without the need for oxidants or hydrogen atom transfer reagents, and the sole byproduct is hydrogen gas. Mechanistic investigation suggests that the reaction is initiated by photoinduced electron transfer under visible-light irradiation.
基金Supported by the National Natural Science Foundation of China !(Grant No. 29574164)
文摘The adsorption of 2,4-dinitrophenol and 2.6-dinitrophenol on non-polar and polar adsorbents was studied. The results showed that the equilibrium adsorption did not comply with the Langmuir equation and was not mono-layer absorption. It is of interest to notice that the effect of pH on the adsorption of 2.4-or 2,6-dinitrophenol onto ADS-7 and ADS-21 was very small. The result is explained by hydrogen bonding interaction between 2, 4- or 2. 6-dinitrophenol and the adsorbent ADS21. The large adsorption capacity of dinitrophenol onto ADS-21, which was about 500 mg/g at an equilibrium concentration of 400 mg/L. and the small dinitrophenol leakage in the effluent from ADS- 21 column presented a good prospect for treatment of wastewater containing dinitrophenol with absorbent ADS-21.
文摘Poly（m-xylylene adipamide）/poly（ethylene terephthalate）（MXD6/PET） copolymers are synthesized by melt copolycondensation with 1–5 wt% low molecular weight PET oligomers into the MXD6 oligomers at 260 ℃.FR-IR and1 H NMR analysis results indicate that the interchange reaction has occurred between MXD6 oligomers and PET oligomers. The thermal behavior of copolymers shows that the melting temperature of MXD6/PET copolymers decreases with the increasing of amount of PET oligomers, while the crystallization temperature accordingly increases. And the equilibrium temperature Tm0 is evaluated to be 251.8 ℃ for the copolymers with5 wt% PET oligomer adding, which is very close to that of neat MXD6. The tensile and impact strength of MXD6/PET copolymers are significantly improved than that of pure MXD6 by mechanical properties test, and the microfibril structure in the impact fracture sample＇s surface reveals the feature of ductile fracture.
基金the French Environment and Energy Management Agency(ADEME) for their support through a PhD fellowship for M.Guillerm
文摘Toluene degradation performances were studied in a 10 L Two-Phase Partitioning Bioreactor(TPPB).The liquid phase consisted of a mixture of water and PDMS 50(Poly Di Methyl Siloxane,i.e.silicone oil,viscosity of 46 m Pa·s) in the volume ratio of 75%/25%.Two series of experiments were carried out:in the first,the reactor was sequentially supplied with toluene whereas in the second,toluene was continuously supplied.Activated sludge from the wastewater treatment plant of Beaurade(Rennes,France) was used at an initial concentration of 0.5 dry mass g·(mixture L)^(-1).The elimination capacity(EC) was investigated as well as the change in biomass concentration over time.Toluene biodegradation was very ef ficient(removal ef ficiency,RE=100%) for toluene flows ranging from 0.2 to 1.2 ml·h^(-1),corresponding to elimination capacities of up to 104 g·m^(-3)·h^(-1).For a toluene flow of 1.2 ml·h^(-1),the biomass concentration measured at the end of the experiment was 4.7 dry mass g·(mixture L)^(-1).The oxygen concentration in the liquid phase was clearly not a limiting factor in these operating conditions.Based on these results,an extrapolation leading to the design of a large-scale pilot TPPB can now be considered to study toluene degradation performances in industrial conditions.
基金Acknowledgments： This work was supported in part by the National Natural Science Foundation of China （No. 20504023）.
文摘Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw material, a new polyurethane elastic body can be made through prepolymerization. After measurement of the moisture permeability, adsorption quantity and mechanical properties of the membrane made with the elastic body, we also proofed its formula by infrared spectroscopy. The result showed that the moisture permeability of the membrane, with a certain intelligent thermotropic quality, will increase by 3 to 4 times when the temperature is between 25℃-45℃.
