A zeolitic imidazolate hybrid membrane(Co-IM-mIM) containing two imidazolate ligands deposited on a macroporous α-alumina support was prepared by pre-depositing and secondary growth technique. XRD, TGA and SEM charac...A zeolitic imidazolate hybrid membrane(Co-IM-mIM) containing two imidazolate ligands deposited on a macroporous α-alumina support was prepared by pre-depositing and secondary growth technique. XRD, TGA and SEM characterizations demonstrate that a stable and thin, but dense and pure-phase Co-IM-mIM membrane can be obtained on the macroporous-alumina discs in Teflon-lined autoclave at 120 °C after pre-depositing by dip-coating at room temperature. No visible cracks, pinholes or other defects were observed on the membrane layer. The gas separation studies of Co-IM-mIM membrane were carried out at 25 °C and 1×10~5 Pa, showing ideal selectivity of 6.95, 5.25, 3.40 for H_2/CO_2, H_2/N_2 and H_2/CH_4, respectively, and a permeance of 17.37× 10^(-6) mol/(m^2·s·Pa) for H_2. The influence of temperature and trans-membrane pressure on hydrogen separation and permeation was also carried out. The gas permeation and selectivity demonstrate that this membrane may have potential applications for efficient H_2 separation.展开更多
Inorganic polymers are a novel class of materials formed by the polymerization of silicon, aluminium and oxygen species to form an amorphous three-dimensional framework structure. The basis of this process is the alka...Inorganic polymers are a novel class of materials formed by the polymerization of silicon, aluminium and oxygen species to form an amorphous three-dimensional framework structure. The basis of this process is the alkaline solutions to induce a certain amount of Si and AI atoms to dissolve from a feedstock such as aluminosilicate. A study of 27A1 MAS-NMR was carried out in an attempt to understand the reaction mechanism of the inorganic polymerization at ambient temperature. Scanning electron microscopy （SEM） and X-ray diflYactometry （XRD） were also employed to establish the composition and microstructure of the inorganic polymerization. Specimens were prepared with different A1/Si mole ratios from the starting materials. The higher the AI content, the more sufficient the AI atoms that can combine with SiO4, and the longer the reaction time, the more the bonded Si--O--A1--O polymer structure, and then the higher the A1 content, the fewer the octahedral A1 with a uniform Si--O--A1--O structure in four directions, because four AI atoms are combined with SiO4, resulting in a uniform Si--O--AI--O structure in four directions. The results show that they have an amorphous microstructure.展开更多
Six novel 3D layer-pillared lanthanide-transition metal coordination polymers,LnCuX(IN)2(Ac)(H2O)(Ln = Tb,X = Br(1);Ln = Er,X = Cl(2)),[LnCuCl(IN)2(Ac)].H2O(Ln = Gd(3);Ln = Eu(4)),and [LnCu2Br2(IN)2(Ac)(H2O)].nH2O(Ln ...Six novel 3D layer-pillared lanthanide-transition metal coordination polymers,LnCuX(IN)2(Ac)(H2O)(Ln = Tb,X = Br(1);Ln = Er,X = Cl(2)),[LnCuCl(IN)2(Ac)].H2O(Ln = Gd(3);Ln = Eu(4)),and [LnCu2Br2(IN)2(Ac)(H2O)].nH2O(Ln = Dy,n =0(5);Ln = Gd,n = 0.5(6))(IN = isonicotinate,Ac = acetate),have been obtained by linking Ln-organic layers and diverse Cu-complex pillars under hydrothermal conditions.1 and 2 are isostructural and formed by 2D Ln-IN-Ac layers and CuX(IN)2 pillars(X = Br(1),X= Cl(2));3 and 4 are isomorphic and comprised of 2D Ln-IN-Ac layers and dimeric Cu2Cl(IN)4 pillars;while 5 and 6 are isostructural and built from 2D Ln-IN-Ac layers and tetrameric Cu4Br4(IN)4 pillars.The magnetic susceptibility investigation of 3 and 6 shows the presence of weak antiferromagnetic exchange interactions between the Ln3+ ions.Compounds 1-6 represent good examples of using 2D Ln-organic layers and diverse Cu-complex pillars as building units to construct intriguing 3D Ln-TM-organic frameworks.展开更多
基金Project(21376274)supported by the National Natural Science Foundation ChinaProject(2015BAL04B02)supported by the National Key Technology R&D Program of China
文摘A zeolitic imidazolate hybrid membrane(Co-IM-mIM) containing two imidazolate ligands deposited on a macroporous α-alumina support was prepared by pre-depositing and secondary growth technique. XRD, TGA and SEM characterizations demonstrate that a stable and thin, but dense and pure-phase Co-IM-mIM membrane can be obtained on the macroporous-alumina discs in Teflon-lined autoclave at 120 °C after pre-depositing by dip-coating at room temperature. No visible cracks, pinholes or other defects were observed on the membrane layer. The gas separation studies of Co-IM-mIM membrane were carried out at 25 °C and 1×10~5 Pa, showing ideal selectivity of 6.95, 5.25, 3.40 for H_2/CO_2, H_2/N_2 and H_2/CH_4, respectively, and a permeance of 17.37× 10^(-6) mol/(m^2·s·Pa) for H_2. The influence of temperature and trans-membrane pressure on hydrogen separation and permeation was also carried out. The gas permeation and selectivity demonstrate that this membrane may have potential applications for efficient H_2 separation.
基金supported by Energy Resource Technology Development Project [The Development and commercialization of Inorganic Polymer Ceramic Panel] of Korea Energy Management Corporationsupported by NCRC(National Core Research Center) Program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology
文摘Inorganic polymers are a novel class of materials formed by the polymerization of silicon, aluminium and oxygen species to form an amorphous three-dimensional framework structure. The basis of this process is the alkaline solutions to induce a certain amount of Si and AI atoms to dissolve from a feedstock such as aluminosilicate. A study of 27A1 MAS-NMR was carried out in an attempt to understand the reaction mechanism of the inorganic polymerization at ambient temperature. Scanning electron microscopy （SEM） and X-ray diflYactometry （XRD） were also employed to establish the composition and microstructure of the inorganic polymerization. Specimens were prepared with different A1/Si mole ratios from the starting materials. The higher the AI content, the more sufficient the AI atoms that can combine with SiO4, and the longer the reaction time, the more the bonded Si--O--A1--O polymer structure, and then the higher the A1 content, the fewer the octahedral A1 with a uniform Si--O--A1--O structure in four directions, because four AI atoms are combined with SiO4, resulting in a uniform Si--O--AI--O structure in four directions. The results show that they have an amorphous microstructure.
基金supported by the National Natural Science Foundation of China(50872133)the National Natural Science Fund for Distinguished Young Scholars of China(20725101)+1 种基金the National Basic Research Program of China(2011CB932504)the Natural Science Foundation of Fujian Province(E0510030 & 2008F3120)
文摘Six novel 3D layer-pillared lanthanide-transition metal coordination polymers,LnCuX(IN)2(Ac)(H2O)(Ln = Tb,X = Br(1);Ln = Er,X = Cl(2)),[LnCuCl(IN)2(Ac)].H2O(Ln = Gd(3);Ln = Eu(4)),and [LnCu2Br2(IN)2(Ac)(H2O)].nH2O(Ln = Dy,n =0(5);Ln = Gd,n = 0.5(6))(IN = isonicotinate,Ac = acetate),have been obtained by linking Ln-organic layers and diverse Cu-complex pillars under hydrothermal conditions.1 and 2 are isostructural and formed by 2D Ln-IN-Ac layers and CuX(IN)2 pillars(X = Br(1),X= Cl(2));3 and 4 are isomorphic and comprised of 2D Ln-IN-Ac layers and dimeric Cu2Cl(IN)4 pillars;while 5 and 6 are isostructural and built from 2D Ln-IN-Ac layers and tetrameric Cu4Br4(IN)4 pillars.The magnetic susceptibility investigation of 3 and 6 shows the presence of weak antiferromagnetic exchange interactions between the Ln3+ ions.Compounds 1-6 represent good examples of using 2D Ln-organic layers and diverse Cu-complex pillars as building units to construct intriguing 3D Ln-TM-organic frameworks.
