聚氨酯水晶耐磨漆的合成

研究了以甲苯二异氰酸酯和聚醚在催化剂的作用下制成的漆基和空气中的潮气作用而固化成膜。该漆涂膜交联密度大,具有高度韧性和耐磨性及优良的耐化学药品。对不同条件下的实验结果作了较为全面的分析,总结出较佳的反应工艺条件。

Closed Loop Recycling of Chlorine for Sustainable Development of Polyurethane Industry

Increasing demand is fueling the booming polyurethane industry worldwide. An impeding issue for poly- urethane industry is how to handle the large quantity of hydrogen chloride byproduct generated from the synthesis of intermediates, i.e., isocyanates. In the meantime, the traditional chloro-alkaline process sufibrs both from the high en- ergy intensity of electrolysis method and the disparity in the chlorine and caustic soda market. To solve these prob- lems, the state-of-the-art chlorine recycling technologies are reviewed and compared. Approaches for cost-effective utilization of chlorine in polyurethane industry are investigated. Chinese academies and enterprises＇ on-going effort on the development of a novel hydrogen chloride oxidation process for the synthesis of chlorine is presented. With this process, the closed loop recycling of chlorine can be realized. Tremendous economic, environmental and social bene- fits can be expected. A wide adoption of this technology will significantly advance the sustainable development of polyurethane industry.

Effect of dosage of expandable graphite,dimethyl methylphosphonate,triethanolamine,and isocyanate on fluidity,mechanical,and flame retardant properties of polyurethane materials in coal reinforcement

In this study,orthogonal experiments were conducted to investigate the influence of expandable graphite(EG),dimethyl methylphosphonate(DMMP),triethanolamine(TEA),and isocyanate content on the compressive and bonding strengths,oxygen index,and fluidity of rigid polyurethane foam(RPUF).The results revealed that EG significantly increased the oxygen index of RPUF,enlarged the diameter of foam cells,and decreased the cell-closed content in foam;thus,leading to a pressure drop in RPUF.However,excessive EG was capable of reducing the fluidity of polyurethane slurry.TEA exhibited significant influence on the compressive strength of RPUF,which dropped initially,and then increased.DMMP had a remarkable effect on the flame retardant property and compressive strength of RPUF.Compressive strength of RPUF initially displayed an increase followed by a decrease with increasing dosage of DMMP,and achieved the maximum value at DMMP dosage of 4%.DMMP could effectively reduce the diameter of RPUF cells leading to an increase in the percentage of close area in foam.DMMP displayed the flame-retardation effects mainly in the gas phase leading to a significant enhancement in the oxygen index of RPUF.Moreover,the compressive strength and bonding strength of RPUF decrease significantly with the increase of isocyanate content due to the increased blowing efficiency by the CO_2.The oxygen index and flowing length of foam increased with the increase in isocyanate dosage.

Preparation and Properties of Tung Oil-Based Polyurethane

Tung oil-based polyols were synthesized by the esterification and transesterification between Tung oilbased anhydride and butanediol. The hydroxyl values of the polyols prepared were tested and discussed. Polyurethane was prepared by using Tung oil-based polyols and/or poly(propylene glycol) as polyols and by using isophorone diisocyanate as isocyanate. The effect of the ratio of Tung oil-based polyols to poly(propylene glycol) on the properties of polyurethane prepared was investigated by the water resistance, alcohol resistance and hardness tests. The results show that Tung oil-based polyols are effective to improve the hardness, water resistance and alcohol resistance of polyurethane.

Research on characterization of thermotropic polyurethane membrane of PDAG/BDO/MDI

Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw material, a new polyurethane elastic body can be made through prepolymerization. After measurement of the moisture permeability, adsorption quantity and mechanical properties of the membrane made with the elastic body, we also proofed its formula by infrared spectroscopy. The result showed that the moisture permeability of the membrane, with a certain intelligent thermotropic quality, will increase by 3 to 4 times when the temperature is between 25℃-45℃.

A Structure-properties Study of MDI-based Hydrophilic Polyether-polyester Polyurethane

A series of segmented polyether-polyester polyurethane with amorphous hydrophilic soft segment domains were prepared from 4,4'- diphenylmethane diisocyanate (MDI), polybutylene adipate (Glycol) 2000 (PBA2000), and polyethylene glycol 1000 (PEG1000), with 1,4-butanediol (BDO) as the chain extender. Furthermore, several representative properties of the polyurethanes, such as moisture permeability, water resistance, hydrophilic property, and phase inversion temperature, were investigated. The studies show that the structure and concentration of soft segment have a remarkable effect on the main application properties of polyurethane. On the contrary, the functional properties of the polyurethane are almost not affected by its hard segment.

Synthesis of biodegradable poly (methylparaben/glycine ethyl ester) phosphazene and further research of its degradation in vitro

Polydichlorophosphazene(PDCP)was synthesized from PCl5 and NH4Cl via a one-pot approach,and then further reacted with glycine ethyl ester and methylparaben via a two-step nucleophilic substitution approach to give poly(methylparaben/glycine ethyl ester)phosphazene(PMGP),which was a kind of mix-substituted biodegradable polymer.NMR and FT-IR were used to characterize its structure.A series of experiments were conducted to study the effects of the ratio of methylparaben to glycine ethyl ester and the experimental conditions to the degradability of PMGP samples.The degradability of PMGP can be adjusted by altering the ratio of methylparaben to glycine ethyl ester easily.