We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through s...We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through spin-coating onto highly n-doped silicon （n-Si） wafers for constructing devices of dielectric measurements, on which the dielectric properties and I-V characteristics of PbMA were studied. PbMA has a much lower dielectric constant （lower than 2.6） in the frequency range of 10-105 Hz, and better thermal stability than PMMA does. I-V data showed that the metal/PbMA/n-Si devices have different conducting directions, depending on whether Au or Al deposited over PbMA layers.展开更多
Ferrocenium monocations as photoinitiators for cationic photopolymerization suffer from a limitation of low absorption and low reactivity under high-pressure Hg lamp. Here, a ferrocenium dication salt, biphenyl bis [...Ferrocenium monocations as photoinitiators for cationic photopolymerization suffer from a limitation of low absorption and low reactivity under high-pressure Hg lamp. Here, a ferrocenium dication salt, biphenyl bis [π-cyclopentadienyl）iron] hexafluorophosphate （[bis（Cp-Fe）-biphenyl] （PF6）2 was synthesized by the ligand exchange reaction between ferrocene and biphenyl. The chemical structure was characterized with FTIR and ^1HNMR. The separation of ferrocenium monocation cyclopentadien-iron-biphenyl hexafluorophosphate （[Cp-Fe-biphenyl] PF6） and dication [bis（Cp-Fe）-biphenyl] （PF6）2 was carried out by column chromatography. The photoactivity of initiating photopolyinerization of epoxide ER14221 was studied as a cationic photoinitiator. [Bis（Cp-Fe）-biphenyl] （PF6）2 can efficiently absorb radiation above 300nm and its photoactivity is higher than that of its monocation.展开更多
In the field of highly integrated printed circuit board （PCB）, the heat resistant substrate with low water absorption is very important material. To get the resin composition for the high functional substrate materi...In the field of highly integrated printed circuit board （PCB）, the heat resistant substrate with low water absorption is very important material. To get the resin composition for the high functional substrate material with low moisture absorption and high glass transition temperature （Tg） simultaneously, a fluorenyl ＂Cardo＂ epoxy was incorporated into novolac cyanate ester resin. As an optimum curing agent for the fiuorenyl epoxy, methyl nadic anhydride （MNA） was selected. Silica powders as fillers were added into the resin composition. The partial replacement of the cyanate ester resin with the fluorenyl epoxy could reduce the moisture absorption with keeping high glass transition temperature over 300 ℃. The laminate, which was fabricated from prepregs made with 40 wt% silica-filled resin composition and glass fabric, showed high Tg of 317 ℃ and low moisture absorption of 0.57%.展开更多
Chemical conversion of carbon dioxide(CO2)to value-added useful chemicals like cyclic carbonates represents one potential solution to climate warming.Here,a kind of porous organic polymer(HAT-TP)with large surface are...Chemical conversion of carbon dioxide(CO2)to value-added useful chemicals like cyclic carbonates represents one potential solution to climate warming.Here,a kind of porous organic polymer(HAT-TP)with large surface area and excellent carbon dioxide uptake capacity is prepared via a condensation reaction to introduce hexaazatriphenylene(HAT)units into triptycene(TP)-based microporous polymer.HAT-TP can coordinate with zinc ions,and the resulting polymer(Zn/HAT-TP)can be utilized as an efficient recyclable catalyst for chemical conversion of CO2 into cyclic carbonates with epoxides.展开更多
基金This work was supported by the National Natural Science Foundation of China （No.51673181）.
文摘We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through spin-coating onto highly n-doped silicon （n-Si） wafers for constructing devices of dielectric measurements, on which the dielectric properties and I-V characteristics of PbMA were studied. PbMA has a much lower dielectric constant （lower than 2.6） in the frequency range of 10-105 Hz, and better thermal stability than PMMA does. I-V data showed that the metal/PbMA/n-Si devices have different conducting directions, depending on whether Au or Al deposited over PbMA layers.
基金Supported by the National Natural Science Foundation of China （20676012）.
文摘Ferrocenium monocations as photoinitiators for cationic photopolymerization suffer from a limitation of low absorption and low reactivity under high-pressure Hg lamp. Here, a ferrocenium dication salt, biphenyl bis [π-cyclopentadienyl）iron] hexafluorophosphate （[bis（Cp-Fe）-biphenyl] （PF6）2 was synthesized by the ligand exchange reaction between ferrocene and biphenyl. The chemical structure was characterized with FTIR and ^1HNMR. The separation of ferrocenium monocation cyclopentadien-iron-biphenyl hexafluorophosphate （[Cp-Fe-biphenyl] PF6） and dication [bis（Cp-Fe）-biphenyl] （PF6）2 was carried out by column chromatography. The photoactivity of initiating photopolyinerization of epoxide ER14221 was studied as a cationic photoinitiator. [Bis（Cp-Fe）-biphenyl] （PF6）2 can efficiently absorb radiation above 300nm and its photoactivity is higher than that of its monocation.
文摘In the field of highly integrated printed circuit board （PCB）, the heat resistant substrate with low water absorption is very important material. To get the resin composition for the high functional substrate material with low moisture absorption and high glass transition temperature （Tg） simultaneously, a fluorenyl ＂Cardo＂ epoxy was incorporated into novolac cyanate ester resin. As an optimum curing agent for the fiuorenyl epoxy, methyl nadic anhydride （MNA） was selected. Silica powders as fillers were added into the resin composition. The partial replacement of the cyanate ester resin with the fluorenyl epoxy could reduce the moisture absorption with keeping high glass transition temperature over 300 ℃. The laminate, which was fabricated from prepregs made with 40 wt% silica-filled resin composition and glass fabric, showed high Tg of 317 ℃ and low moisture absorption of 0.57%.
基金supported by the National Natural Science Foundation of China (21875079 and 21672078)
文摘Chemical conversion of carbon dioxide(CO2)to value-added useful chemicals like cyclic carbonates represents one potential solution to climate warming.Here,a kind of porous organic polymer(HAT-TP)with large surface area and excellent carbon dioxide uptake capacity is prepared via a condensation reaction to introduce hexaazatriphenylene(HAT)units into triptycene(TP)-based microporous polymer.HAT-TP can coordinate with zinc ions,and the resulting polymer(Zn/HAT-TP)can be utilized as an efficient recyclable catalyst for chemical conversion of CO2 into cyclic carbonates with epoxides.
