Polysulfonamide(PSA)was synthesized at room temperature,the polymerization based on terephthaloyl chloride and 3,3’-diaminodiphenylsulfone in the common solvent N,N-Dimethyl-acetamide(DMAc).Polysulfonamide/titanium o...Polysulfonamide(PSA)was synthesized at room temperature,the polymerization based on terephthaloyl chloride and 3,3’-diaminodiphenylsulfone in the common solvent N,N-Dimethyl-acetamide(DMAc).Polysulfonamide/titanium oxide nanocomposites were prepared by sol-gel method.Tetrabutyl titanate(TBT)was added into the polysulfonamide solution,at the same time,some water was mixed to make the TBT hydrolyze.In the process,hydrochloric acid was used to catalyze the reaction.The polysulfonamide chemistry structure was characterized by FT-IR spectrum.Atomic force microscopy(AFM)was employed to observe the microstructure of the composite film.The thermal property was investigated by TGA.The results show that we have succeeded to synthesize the polysulfonamide,TiO2 particles were well distributed in the composite film and average size was about 20 nm on average,the heat-resistance of nanocomposite was batter than the pure polysulfonamide.展开更多
A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diamin...A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diaminodiphenyl sulfone （DDS） and terephthaloyl chloride （TPC） in the common solvent N, N-Dimethyl- -acetamide （DMAc）. Nano filler is a certain nano titanium oxide modified by silicon oxide （TMS）, which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy （AFM）, thermal gravimetric Analysis （TGA） and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.展开更多
Polystyrene N-hydroxyl sulfonamide resin 1 was prepared and used to catalyze the esterification of n-butanol and acetic anhydride. The mechanism of catalytic esterification proved by IR spectra of the resins was found...Polystyrene N-hydroxyl sulfonamide resin 1 was prepared and used to catalyze the esterification of n-butanol and acetic anhydride. The mechanism of catalytic esterification proved by IR spectra of the resins was found that O-H and N-H of the N-hydroxyl sulfonamide resin reacted with the acetic anhydride respectively to form the active intermediate polystyrene N,O-diacetyl sulfonamate which was cleaved by n-butanol to produce butyl acetate. The catalytic esterification by resin 1 was in good agreement with the kinetic model of 揵i-bi-ping-pong?mechanism.展开更多
A novel morphology-controlled strategy has been developed to fabricate sulfonated graphene/polyaniline （SGEP） nanocomposites by liquid/liquid interracial polymerization. Sulfonated graphene （SGE） sheets were synth...A novel morphology-controlled strategy has been developed to fabricate sulfonated graphene/polyaniline （SGEP） nanocomposites by liquid/liquid interracial polymerization. Sulfonated graphene （SGE） sheets were synthesized and used as both a macromolecular acid dopant and substrate for the polymerization of polyaniline （PANI）, affording the SGEP nanocomposites. The morphology of PAN! in the nanocomposites can be controlled to be either nanorods or nanogranules by varying the synthesis conditions. The morphology of SGEP and the shape of PANI can be tuned by adding an additional dopant and varying the amount of SGE used, and this had a significant influence on the electrochemical performance of the nanocomposites as supercapacitor electrode materials. The SGEP nanocomposite with PANI nanorods exhibited a specific capacitance of 763 F/g with a capacity retention of 96% after 100 cycles and good rate properties. Composites obtained with HCI as an additional acid dopant with two different ratios of SGE to PANI showed higher specific capacitances of 793 and 931 F/g, but lower capacity retention after 100 cycles of 77% and 76%, respectively.展开更多
A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were em...A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurements. Compared with the plain graphite anode,the composite anode significantly improves the power density,5.5-fold higher,reaching 187.1 mW/m2 and gives a 27-fold higher exchange current density and a higher kinetic activity. A novel synergistic mechanism between sulfonated polyaniline and vanadate is proposed to explain the excellent electrochemical performance. This composite thus has great potential to be used as an anode material for a high-power BMFC.展开更多
文摘Polysulfonamide(PSA)was synthesized at room temperature,the polymerization based on terephthaloyl chloride and 3,3’-diaminodiphenylsulfone in the common solvent N,N-Dimethyl-acetamide(DMAc).Polysulfonamide/titanium oxide nanocomposites were prepared by sol-gel method.Tetrabutyl titanate(TBT)was added into the polysulfonamide solution,at the same time,some water was mixed to make the TBT hydrolyze.In the process,hydrochloric acid was used to catalyze the reaction.The polysulfonamide chemistry structure was characterized by FT-IR spectrum.Atomic force microscopy(AFM)was employed to observe the microstructure of the composite film.The thermal property was investigated by TGA.The results show that we have succeeded to synthesize the polysulfonamide,TiO2 particles were well distributed in the composite film and average size was about 20 nm on average,the heat-resistance of nanocomposite was batter than the pure polysulfonamide.
文摘A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diaminodiphenyl sulfone （DDS） and terephthaloyl chloride （TPC） in the common solvent N, N-Dimethyl- -acetamide （DMAc）. Nano filler is a certain nano titanium oxide modified by silicon oxide （TMS）, which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy （AFM）, thermal gravimetric Analysis （TGA） and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.
基金Natural Science Foundation of China (Project number: 20074017)
文摘Polystyrene N-hydroxyl sulfonamide resin 1 was prepared and used to catalyze the esterification of n-butanol and acetic anhydride. The mechanism of catalytic esterification proved by IR spectra of the resins was found that O-H and N-H of the N-hydroxyl sulfonamide resin reacted with the acetic anhydride respectively to form the active intermediate polystyrene N,O-diacetyl sulfonamate which was cleaved by n-butanol to produce butyl acetate. The catalytic esterification by resin 1 was in good agreement with the kinetic model of 揵i-bi-ping-pong?mechanism.
文摘A novel morphology-controlled strategy has been developed to fabricate sulfonated graphene/polyaniline （SGEP） nanocomposites by liquid/liquid interracial polymerization. Sulfonated graphene （SGE） sheets were synthesized and used as both a macromolecular acid dopant and substrate for the polymerization of polyaniline （PANI）, affording the SGEP nanocomposites. The morphology of PAN! in the nanocomposites can be controlled to be either nanorods or nanogranules by varying the synthesis conditions. The morphology of SGEP and the shape of PANI can be tuned by adding an additional dopant and varying the amount of SGE used, and this had a significant influence on the electrochemical performance of the nanocomposites as supercapacitor electrode materials. The SGEP nanocomposite with PANI nanorods exhibited a specific capacitance of 763 F/g with a capacity retention of 96% after 100 cycles and good rate properties. Composites obtained with HCI as an additional acid dopant with two different ratios of SGE to PANI showed higher specific capacitances of 793 and 931 F/g, but lower capacity retention after 100 cycles of 77% and 76%, respectively.
基金supported by the Scientific and Technological Development Plan Project of Shandong Province, China (2008GG10007003)the Key Laboratory of Marine Environment & Ecology, Ministry of Education (2008010)the Key Laboratory of Submarine Geoscience and Exploring Technology of Ministry of Education, Ocean University of China (2008-01)
文摘A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurements. Compared with the plain graphite anode,the composite anode significantly improves the power density,5.5-fold higher,reaching 187.1 mW/m2 and gives a 27-fold higher exchange current density and a higher kinetic activity. A novel synergistic mechanism between sulfonated polyaniline and vanadate is proposed to explain the excellent electrochemical performance. This composite thus has great potential to be used as an anode material for a high-power BMFC.
