Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diam...Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.展开更多
Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the pres...Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.展开更多
PS-PAMAM-IDA chelating resins were prepared by low-generations of polyamidoamine(PAMAM) and then chloroacetic acid functionalizing commercially available ammoniated polystyrene matrix, to preconcentrate Ni2+ from synt...PS-PAMAM-IDA chelating resins were prepared by low-generations of polyamidoamine(PAMAM) and then chloroacetic acid functionalizing commercially available ammoniated polystyrene matrix, to preconcentrate Ni2+ from synthetic aqueous samples. Different generations of PAMAM were used to obtain different chelating resins, PS-IDA, PS-1.0G PAMAM-IDA and PS-2.0G PAMAM-IDA. The synthesized resins were characterized by FTIR and elemental analysis. The effect of solution pH, kinetic studies, resin loading capacity, matrix effects etc., on metal ion adsorption to adsorbent phase, were studied by batch method. The PS-1.0G PAMAM-IDA resin was the most excellent adsorbents, with a maximum adsorption capacity of(24.09±1.79) mg/g for Ni2+ ion at pH=7. The interpretation of the equilibrium data was given by Langmuir isotherms model, and the correlation coefficient values for PS-IDA, PS-1.0G PAMAM-IDA and PS-2.0G PAMAM-IDA resins were 0.992, 0.994 and 0.987, respectively.展开更多
Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB ...Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB indicates that there is significant retardation in the reaction rate when BDB is used. The molecular weight of styrene polymer prepared with BDB shows linear relationship with the conversion of monomer, polydispersity is as narrow as 1.2, and no gel effects are observed during the polymerization with BDB, which are characteristics of a living radical polymerization. It has been found that the concentrations of BDB and azobis (isobutyronitrile) (AIBN) have opposite effects on the polymerization kinetics, and the AIBN dominates.展开更多
A lattice fluid model, Sanchez-Lacombe equation, is used to predict the phase behavior for a styrene/CO2/polystyrene ternary sys-tem. The binary parameters involved in the equation were optimized using experimental da...A lattice fluid model, Sanchez-Lacombe equation, is used to predict the phase behavior for a styrene/CO2/polystyrene ternary sys-tem. The binary parameters involved in the equation were optimized using experimental data. Phase diagrams and the distribution coefficients of styrene between polymer phase and fluid phase are obtained over a wide range of pressure, temperature and composition. The analysis of ter-nary phase diagrams indicates that this system at relatively high pressure or low temperature may display two-phase equilibrium, and at low pressures or high temperatures three-phase equilibrium may appear. The distribution coefficients of styrene between the fluid phase and the polymer phase increase asymptotically to unity when the concentration of styrene increases. The results provide thermodynamic knowledge for further exploitation of supercritical carbon dioxide assisted devolatilization and impregnation.展开更多
Acetyl crosslinked polystyrene (EPS) and crosslinked bromoacetyl polystyrene (BEPS)beads were synthesized by Fridel-Crafts acetylation of polystyrene (PS) and bromination of EPS respectively. FTIR, XPS, and TG-TDG wer...Acetyl crosslinked polystyrene (EPS) and crosslinked bromoacetyl polystyrene (BEPS)beads were synthesized by Fridel-Crafts acetylation of polystyrene (PS) and bromination of EPS respectively. FTIR, XPS, and TG-TDG were employed to characterize their structures. The results revealed there are two types of bromine in the BEPS molecule. One is in the main chain of polystyrene and the other is in the acetyl. The results of TG-DTG showed that the rates of loss weight of PS, EPS, and BEPS were 92.7%, 92.2%, and 81.3% among the 300 ℃～500 ℃; 7.3%, 7.8%, and 18. 7% in 594 ℃, 660 ℃, and 584.8 ℃, respectively.展开更多
This paper presents a non-linear simulation of the impact on a structure with different energy absorption systems using finite element models. Literature review on bistable structure, aluminum foam and expandable poly...This paper presents a non-linear simulation of the impact on a structure with different energy absorption systems using finite element models. Literature review on bistable structure, aluminum foam and expandable polystyrene is presented and taken as basis to propose energy absorption systems. Using a base structure, these systems are implemented by means of finite element modeling. A comparison of the damage caused to the structure in case of impact without implementing energy absorption system, and implementing energy absorption systems based on bistable structures, polystyrene foam and aluminum foam are shown here in. The results demonstrate the advantages of using energy absorption systems on structures under impact loads.展开更多
The influences of both the volume of PS/toluene solution in the Ubbelohde viscometer and the precision of the time measuring on the viscosity behavior in dilute and extremely dilute concentration region are investigat...The influences of both the volume of PS/toluene solution in the Ubbelohde viscometer and the precision of the time measuring on the viscosity behavior in dilute and extremely dilute concentration region are investigated. It was found that the influence of the former can neglect, but that of the latter is so prominent that the data fluctuate bitterly and linearity of the curve of the reduced viscosity vs. concentration (hsp/c^c) becomes too bad to obey the Huggins equation down to the extremely dilute region, despite the error of the flow times Dt 0.2s, which is permitted by the conventional method of viscosity measurement. Through strict mathematical analyses, it was found that the error (E) of the reduced viscosity is in proportion and inverse proportion to Dt and concentration c, respectively. So the less the concentration, the more the error is. Consequently, a lowest concentration limit cL corresponding to given experimental error may exist and it will be meaningless for further operation below cL because of the great fluctuation of the data. Therefore, it needs to seriously reconsider the application of the conventional method of Ubbelohde viscosity measurement in the extremely dilute polymer solution under traditional conditions because of the great influence of the experimental error.展开更多
The effects of different treatments, such as dry heat,wet heat, solvent vapor and ultrasonic, on propertiesof the cyclic oligomers on the surface of polyester fiberare studied. The components of surface oligomers area...The effects of different treatments, such as dry heat,wet heat, solvent vapor and ultrasonic, on propertiesof the cyclic oligomers on the surface of polyester fiberare studied. The components of surface oligomers areanalyzed through Thin-Layer Chromatograph. Theresult shows that: all of the treatment, especially solvent vapor treatment,call significantly increase the content of surface cyclic oligomers.The content of cyclic triIner is increased more considerably than other oligomers. Moreover,the morphology and thedistribution of surface cyclic oligomers are also different from different treatments:Dry heat and wet heat cause larger polygonal solids distributed evenly on the surface of fiber;solvent vapor nlakes fiber surface exhibit irregular rodlike crystal shapes randomly;ultrasonic treatment induces some obscureand smaller deposi^on the surface of fiber.展开更多
A starved feed reactor (SFR) is a semi-batch polymerization reactor where initiator and monomer are fed slowly into a fixed amount of solvent. The polymerization is carried out isothermally at elevated temperatures. T...A starved feed reactor (SFR) is a semi-batch polymerization reactor where initiator and monomer are fed slowly into a fixed amount of solvent. The polymerization is carried out isothermally at elevated temperatures. The added initiator decomposes instantaneously and the added monomer polymerizes immediately. The molecular weight (MW) and molecular weight distribution (MWD) of the product polymer can be effectively controlled by the feed ratio of monomer to initiator. This paper presents a study on the MWD of styrene polymerization in a SFR. The MWD model parameters are regressed with experimental data. Although the solids fraction in the SFR is high (higher than 50%), viscosity is not too high and the 'gel effect' is weak due to the low molecular weight of the products. It is found that the termination rate constant is a power function of molecular weight, radicals terminate via 100% combination, the thermal initiation can be neglected even at high reaction temperature studied. And calculated results indicate that in the SFR, the validity of the long chain assumption becomes doubted. It appears that other alterative assumption should be found for an improved model.展开更多
Two kinds of St/DVB copolymer beeds containing (1 - pyrenyl) formyl and(1 -pyrenyl) methyl groups respectively have been synthesized by both functionalization and copolymerization. The fluorescence spectra of the swo...Two kinds of St/DVB copolymer beeds containing (1 - pyrenyl) formyl and(1 -pyrenyl) methyl groups respectively have been synthesized by both functionalization and copolymerization. The fluorescence spectra of the swollen polymers synthesized are similar in shape to those of the corresponding model compounds, whilethe intensity ratio of excimer to monomer shows clear dependence on the contents ofthe pyrene groups.展开更多
Several macroporous polymeric adsorbents (NDA-999, XAD-8, X-5 and XAD-2) were employed in the study to adsorb phenylacetic acid from aqueous solution. Effect of salt and ambient temperature on adsorption was studied u...Several macroporous polymeric adsorbents (NDA-999, XAD-8, X-5 and XAD-2) were employed in the study to adsorb phenylacetic acid from aqueous solution. Effect of salt and ambient temperature on adsorption was studied using NDA-999 adsorbent and the adsorption process conforms to Freundlich抯 model reasonably. Adsorption dynamics were conducted in batch experiments in order to make clear the mechanism of adsorption process. It is proved that the squared driving force mass transfer model can be adopted to elucidate the process. The treatment process of industrial wastewater containing high strength of phenylacetic acid was proposed for cleaner production of phenylacetic acid.展开更多
The interface and surface properties of nano-hydroxyapatite(n-HA) and poly( 1, 4-phenylene sulfide)-poly (2,4-phenylene sulfide acid)(PPS-PPSA) copolymer composite were investigated. The results show that there are so...The interface and surface properties of nano-hydroxyapatite(n-HA) and poly( 1, 4-phenylene sulfide)-poly (2,4-phenylene sulfide acid)(PPS-PPSA) copolymer composite were investigated. The results show that there are some strong interface combinations of calcium ion (Ca2+ ), car-boxyl (-COO- ) and phosphate radicle ion (PO_4~3- ) between copolymer and n-HA in the composite. The presence of the 2,4-phenylene sulfide acid in copolymer can increase the affinity to n-HA, which causes the formation of chemical bindings between the PPS-PPSA copolymer and n-HA. XRD analysis and IR surface analysis indicate that n-HA is not encapsulated by copolymer but exposed on the surface of the composite, and has same structure and properties with the origi-nal n-HA. The presence of the interface chemical bindings between the PPS-PPSA copolymer and n-HA can increase the content of n-HA in composite but does not cause the decrease of the composite mechanical strength.展开更多
Shirota's kinetic model and our kinetic model were used to treat the kinetic data of styrene (St) and N-phenylmaleimide (PMI) copolymerization in which charge-transfer complex (CTC) was formed. The results obtaine...Shirota's kinetic model and our kinetic model were used to treat the kinetic data of styrene (St) and N-phenylmaleimide (PMI) copolymerization in which charge-transfer complex (CTC) was formed. The results obtained by Shirota's kinetic model were disagreed with the experiments and the experimental phenomena could not be explained. The kinetic data of all feed fractions can be treated with our kinetic model, and the experimental phenomena can be explained from the propagation constants and reactivity ratios. Our kinetic model is also suitable for the kinetic data of methyl methacrylate (MMA) and PMI copolymerization in which CTC can not be formed.展开更多
基金Projects (11KJB530002, CX10B-259Z) supported by Research Funds from Jiangsu Provincial Department of Education, ChinaProject (10zxfk35) supported by Sichuan Province Nonmetallic Composites and Functional Materials Key Laboratory Project, China
文摘Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.
基金Natural Science Foundation of Guangdong Province （No.05006556）.
文摘Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.
基金Project(51074192)supported by the National Natural Science Foundation of China
文摘PS-PAMAM-IDA chelating resins were prepared by low-generations of polyamidoamine(PAMAM) and then chloroacetic acid functionalizing commercially available ammoniated polystyrene matrix, to preconcentrate Ni2+ from synthetic aqueous samples. Different generations of PAMAM were used to obtain different chelating resins, PS-IDA, PS-1.0G PAMAM-IDA and PS-2.0G PAMAM-IDA. The synthesized resins were characterized by FTIR and elemental analysis. The effect of solution pH, kinetic studies, resin loading capacity, matrix effects etc., on metal ion adsorption to adsorbent phase, were studied by batch method. The PS-1.0G PAMAM-IDA resin was the most excellent adsorbents, with a maximum adsorption capacity of(24.09±1.79) mg/g for Ni2+ ion at pH=7. The interpretation of the equilibrium data was given by Langmuir isotherms model, and the correlation coefficient values for PS-IDA, PS-1.0G PAMAM-IDA and PS-2.0G PAMAM-IDA resins were 0.992, 0.994 and 0.987, respectively.
文摘Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB indicates that there is significant retardation in the reaction rate when BDB is used. The molecular weight of styrene polymer prepared with BDB shows linear relationship with the conversion of monomer, polydispersity is as narrow as 1.2, and no gel effects are observed during the polymerization with BDB, which are characteristics of a living radical polymerization. It has been found that the concentrations of BDB and azobis (isobutyronitrile) (AIBN) have opposite effects on the polymerization kinetics, and the AIBN dominates.
基金Supported by the National Natural Science Foundation of China (No. 29676037).
文摘A lattice fluid model, Sanchez-Lacombe equation, is used to predict the phase behavior for a styrene/CO2/polystyrene ternary sys-tem. The binary parameters involved in the equation were optimized using experimental data. Phase diagrams and the distribution coefficients of styrene between polymer phase and fluid phase are obtained over a wide range of pressure, temperature and composition. The analysis of ter-nary phase diagrams indicates that this system at relatively high pressure or low temperature may display two-phase equilibrium, and at low pressures or high temperatures three-phase equilibrium may appear. The distribution coefficients of styrene between the fluid phase and the polymer phase increase asymptotically to unity when the concentration of styrene increases. The results provide thermodynamic knowledge for further exploitation of supercritical carbon dioxide assisted devolatilization and impregnation.
基金National Natural Science Foundation of China (No.29906008) and Nature Science Foundation of Shandong Province (No.Q99B15).
文摘Acetyl crosslinked polystyrene (EPS) and crosslinked bromoacetyl polystyrene (BEPS)beads were synthesized by Fridel-Crafts acetylation of polystyrene (PS) and bromination of EPS respectively. FTIR, XPS, and TG-TDG were employed to characterize their structures. The results revealed there are two types of bromine in the BEPS molecule. One is in the main chain of polystyrene and the other is in the acetyl. The results of TG-DTG showed that the rates of loss weight of PS, EPS, and BEPS were 92.7%, 92.2%, and 81.3% among the 300 ℃～500 ℃; 7.3%, 7.8%, and 18. 7% in 594 ℃, 660 ℃, and 584.8 ℃, respectively.
文摘This paper presents a non-linear simulation of the impact on a structure with different energy absorption systems using finite element models. Literature review on bistable structure, aluminum foam and expandable polystyrene is presented and taken as basis to propose energy absorption systems. Using a base structure, these systems are implemented by means of finite element modeling. A comparison of the damage caused to the structure in case of impact without implementing energy absorption system, and implementing energy absorption systems based on bistable structures, polystyrene foam and aluminum foam are shown here in. The results demonstrate the advantages of using energy absorption systems on structures under impact loads.
文摘The influences of both the volume of PS/toluene solution in the Ubbelohde viscometer and the precision of the time measuring on the viscosity behavior in dilute and extremely dilute concentration region are investigated. It was found that the influence of the former can neglect, but that of the latter is so prominent that the data fluctuate bitterly and linearity of the curve of the reduced viscosity vs. concentration (hsp/c^c) becomes too bad to obey the Huggins equation down to the extremely dilute region, despite the error of the flow times Dt 0.2s, which is permitted by the conventional method of viscosity measurement. Through strict mathematical analyses, it was found that the error (E) of the reduced viscosity is in proportion and inverse proportion to Dt and concentration c, respectively. So the less the concentration, the more the error is. Consequently, a lowest concentration limit cL corresponding to given experimental error may exist and it will be meaningless for further operation below cL because of the great fluctuation of the data. Therefore, it needs to seriously reconsider the application of the conventional method of Ubbelohde viscosity measurement in the extremely dilute polymer solution under traditional conditions because of the great influence of the experimental error.
文摘The effects of different treatments, such as dry heat,wet heat, solvent vapor and ultrasonic, on propertiesof the cyclic oligomers on the surface of polyester fiberare studied. The components of surface oligomers areanalyzed through Thin-Layer Chromatograph. Theresult shows that: all of the treatment, especially solvent vapor treatment,call significantly increase the content of surface cyclic oligomers.The content of cyclic triIner is increased more considerably than other oligomers. Moreover,the morphology and thedistribution of surface cyclic oligomers are also different from different treatments:Dry heat and wet heat cause larger polygonal solids distributed evenly on the surface of fiber;solvent vapor nlakes fiber surface exhibit irregular rodlike crystal shapes randomly;ultrasonic treatment induces some obscureand smaller deposi^on the surface of fiber.
基金Supported by the State Key Polymerization Reaction Engineering Laboratory of Zhejiang University.
文摘A starved feed reactor (SFR) is a semi-batch polymerization reactor where initiator and monomer are fed slowly into a fixed amount of solvent. The polymerization is carried out isothermally at elevated temperatures. The added initiator decomposes instantaneously and the added monomer polymerizes immediately. The molecular weight (MW) and molecular weight distribution (MWD) of the product polymer can be effectively controlled by the feed ratio of monomer to initiator. This paper presents a study on the MWD of styrene polymerization in a SFR. The MWD model parameters are regressed with experimental data. Although the solids fraction in the SFR is high (higher than 50%), viscosity is not too high and the 'gel effect' is weak due to the low molecular weight of the products. It is found that the termination rate constant is a power function of molecular weight, radicals terminate via 100% combination, the thermal initiation can be neglected even at high reaction temperature studied. And calculated results indicate that in the SFR, the validity of the long chain assumption becomes doubted. It appears that other alterative assumption should be found for an improved model.
文摘Two kinds of St/DVB copolymer beeds containing (1 - pyrenyl) formyl and(1 -pyrenyl) methyl groups respectively have been synthesized by both functionalization and copolymerization. The fluorescence spectra of the swollen polymers synthesized are similar in shape to those of the corresponding model compounds, whilethe intensity ratio of excimer to monomer shows clear dependence on the contents ofthe pyrene groups.
文摘Several macroporous polymeric adsorbents (NDA-999, XAD-8, X-5 and XAD-2) were employed in the study to adsorb phenylacetic acid from aqueous solution. Effect of salt and ambient temperature on adsorption was studied using NDA-999 adsorbent and the adsorption process conforms to Freundlich抯 model reasonably. Adsorption dynamics were conducted in batch experiments in order to make clear the mechanism of adsorption process. It is proved that the squared driving force mass transfer model can be adopted to elucidate the process. The treatment process of industrial wastewater containing high strength of phenylacetic acid was proposed for cleaner production of phenylacetic acid.
文摘The interface and surface properties of nano-hydroxyapatite(n-HA) and poly( 1, 4-phenylene sulfide)-poly (2,4-phenylene sulfide acid)(PPS-PPSA) copolymer composite were investigated. The results show that there are some strong interface combinations of calcium ion (Ca2+ ), car-boxyl (-COO- ) and phosphate radicle ion (PO_4~3- ) between copolymer and n-HA in the composite. The presence of the 2,4-phenylene sulfide acid in copolymer can increase the affinity to n-HA, which causes the formation of chemical bindings between the PPS-PPSA copolymer and n-HA. XRD analysis and IR surface analysis indicate that n-HA is not encapsulated by copolymer but exposed on the surface of the composite, and has same structure and properties with the origi-nal n-HA. The presence of the interface chemical bindings between the PPS-PPSA copolymer and n-HA can increase the content of n-HA in composite but does not cause the decrease of the composite mechanical strength.
基金Supported by the Doctoral Foundation of the Education Commission of China.
文摘Shirota's kinetic model and our kinetic model were used to treat the kinetic data of styrene (St) and N-phenylmaleimide (PMI) copolymerization in which charge-transfer complex (CTC) was formed. The results obtained by Shirota's kinetic model were disagreed with the experiments and the experimental phenomena could not be explained. The kinetic data of all feed fractions can be treated with our kinetic model, and the experimental phenomena can be explained from the propagation constants and reactivity ratios. Our kinetic model is also suitable for the kinetic data of methyl methacrylate (MMA) and PMI copolymerization in which CTC can not be formed.
