期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
水溶性聚苯胺纳米粒子对碳钢的缓蚀作用 被引量:6
1
作者 马骏 刘栓 +4 位作者 赵海超 陈斌 周开河 方云辉 江炯 《腐蚀与防护》 CAS 北大核心 2017年第1期30-34,共5页
采用分散聚合法合成了水溶性聚苯胺(PANi)纳米粒子,并利用红外光谱、电子扫描电镜和激光粒度仪观察该聚合物的结构和粒径分布。采用极化曲线和电化学阻抗谱研究该水溶性聚苯胺纳米粒子对碳钢在1mol/L HCl溶液中的缓蚀作用。结果表明:聚... 采用分散聚合法合成了水溶性聚苯胺(PANi)纳米粒子,并利用红外光谱、电子扫描电镜和激光粒度仪观察该聚合物的结构和粒径分布。采用极化曲线和电化学阻抗谱研究该水溶性聚苯胺纳米粒子对碳钢在1mol/L HCl溶液中的缓蚀作用。结果表明:聚苯胺纳米粒子可在碳钢表面吸附成膜,从而有效降低其腐蚀速率,当缓蚀剂的质量浓度为0.5g/L时,缓蚀率达到95.6%。 展开更多
关键词 聚苯胺纳米粒子 缓蚀剂 腐蚀行为 电化学阻抗谱
下载PDF
聚苯胺纳米粒子的反胶束法合成及自组装 被引量:5
2
作者 邢双喜 褚莹 隋晓萌 《应用化学》 CAS CSCD 北大核心 2004年第12期1315-1319,共5页
分别在 2 乙基己基琥珀酸钠 (AOT)、聚氧乙烯烷基苯基醚 (OP)及溴化十六烷基三甲基铵 (CTAB) 3种表面活性剂构建的反胶束体系中合成了聚苯胺纳米粒子 ;利用紫外 可见、红外光谱、X射线粉末衍射及透射电镜等对产物进行了结构表征和形... 分别在 2 乙基己基琥珀酸钠 (AOT)、聚氧乙烯烷基苯基醚 (OP)及溴化十六烷基三甲基铵 (CTAB) 3种表面活性剂构建的反胶束体系中合成了聚苯胺纳米粒子 ;利用紫外 可见、红外光谱、X射线粉末衍射及透射电镜等对产物进行了结构表征和形态观察 ;讨论了反胶束水池大小、苯胺单体浓度及表面活性剂种类等对聚苯胺纳米粒子尺寸和形态的影响 ;首次探讨了反胶束体系中聚苯胺纳米粒子的形成过程。结果表明 ,聚苯胺纳米粒子的尺寸随着反胶束水池的增大而增大 ,并能在较高单体浓度下进行自组装 ,聚苯胺纳米粒子从球形组装为米粒状 ;单体浓度从 0 0 5mol/L增大到 0 2mol/L时 ,以及表面活性剂带有电荷时 。 展开更多
关键词 聚苯胺 纳米粒子 反胶束 自组装
下载PDF
聚苯胺吡咯纳米粒子的制备及其表征
3
作者 钱保茵 王月蓉 +2 位作者 向玲 王炳杰 李雅丽 《化工科技》 CAS 2021年第5期63-67,共5页
通过化学氧化聚合法,以聚乙二醇-4-叔辛基苯基醚为表面活性剂,n(苯胺)∶n(吡咯)=1∶1,氧化剂c(过硫酸铵)=8 mmol,t=10 h进行聚合反应,得到聚苯胺吡咯(PACP)球形纳米粒子。通过扫描电镜、红外光谱、紫外分光光度、差热分析进行表征,结果... 通过化学氧化聚合法,以聚乙二醇-4-叔辛基苯基醚为表面活性剂,n(苯胺)∶n(吡咯)=1∶1,氧化剂c(过硫酸铵)=8 mmol,t=10 h进行聚合反应,得到聚苯胺吡咯(PACP)球形纳米粒子。通过扫描电镜、红外光谱、紫外分光光度、差热分析进行表征,结果表明,粒子平均尺寸为150 nm、呈球形、粒径分布均匀、分散性良好;1491 cm^(-1)处的红外吸收峰为聚吡咯中吡咯环的特征吸收峰;约225和750 nm为PACP的最大紫外吸收峰;PACP纳米粒子的热稳定性较好。 展开更多
关键词 化学氧化聚合法 聚苯胺吡咯球型纳米粒子 制备 表征
下载PDF
Electrochemical Behavior and Specific Capacitance of Polyaniline/Silver Nanoparticle/Multi-walled Carbon Nanotube Composites 被引量:1
4
作者 李嘉 张迪 +1 位作者 郭金宝 魏杰 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2014年第6期718-724,I0004,共8页
In this work, we fabricated the polyaniline/silver nanoparticle/multi-walled carbon nanotube (PANI/Ag/MWCNT) composites by in situ polymerization of aniline on the wall of Ag/MWCNTs with different aniline to Ag/MWCN... In this work, we fabricated the polyaniline/silver nanoparticle/multi-walled carbon nanotube (PANI/Ag/MWCNT) composites by in situ polymerization of aniline on the wall of Ag/MWCNTs with different aniline to Ag/MWCNT mass ratios. The chemical structure of the ternary composites was characterized by Fourier transform infrared spectroscopy, Xray diffraction, and X-ray photoelectron spectroscopy. Scanning electron microscope and high-resolution transmission electron microscopy were used to observe the morphology of the ternary composites. The results showed that the polyaniline PANI layer was prepared successfully and it covered Ag/MWCNTs completely. In addition, Ag nanoparticles between the MWCNT core and the PANI layer existed in the form of elemental crystal, which could contribute to the electrochemical performance of the composites. Then we prepared the composite electrodes and studied their electrochemical behaviors in 1 mol/L KOH. It was found that these composite electrodes had very low impedance, and exhibited lower resistance, higher electrochemical activity, and better cyclic stability compared with pure PANI electrode. Particularly, when the mass ratio of aniline to Ag/MWCNTs was 5:5, the composite electrode displayed a small equivalent series resistance (0.23 Ω) and low interfacial charge transfer resistance (〈0.25 Ω), as well as 160 F/g of the maximum specific capacitance at a current density of 0.25 A/g in KOH solution. We could conclude that the composite material had potential applications as cathode materials for lithium batteries and supercapacitors. 展开更多
关键词 Carbon nanotubes Silver nanoparticles POLYANILINE Electrochemical behaviors
下载PDF
Synthesis of hierarchical Polystyrene/Polyaniline@Au nanostructures of different surface states and studies of their catalytic properties 被引量:2
5
作者 YU Jie GUO WanChun +3 位作者 YANG Mu LUAN Yi TAO JinZhang ZHANG XiaoWei 《Science China Chemistry》 SCIE EI CAS 2014年第9期1211-1217,共7页
We synthesized hierarchical Polystyrene/Polyaniline@Au(PS/PANI@Au) catalysts through a seeded swelling polymerization and in-situ reduction procedure. PS/PANI@Au catalysts possess a core of PS as seed and template, a ... We synthesized hierarchical Polystyrene/Polyaniline@Au(PS/PANI@Au) catalysts through a seeded swelling polymerization and in-situ reduction procedure. PS/PANI@Au catalysts possess a core of PS as seed and template, a PANI shell with fibers and uniform gold nanoparticles on the surface. The configuration changes of the PANI chains resulting from the doping/ dedoping procedure led to various loading amounts of Au nanoparticles. Reduction of 4-nitrophenol was chosen as the probe reaction to evaluate the catalytic activity of supported Au nanocatalysts. The catalytic results indicated that dedoping treatment of the PS/PANI supports provides stronger coordinative ability to metal nanoparticles as well as more –N= groups, which results in a better catalytic performance towards the reduction of 4-nitrophenol. 展开更多
关键词 hierarchical PS/PANI supported gold catalyst reduction of 4-nitrophenol doping/dedoping treatment
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部