The hydration mechanism of low quality fly ash in cement-based materials was investigated. The hydration heat of the composite cementitious materials was determined by isothermal calorimetry, and the hydration product...The hydration mechanism of low quality fly ash in cement-based materials was investigated. The hydration heat of the composite cementitious materials was determined by isothermal calorimetry, and the hydration products, quantity, pore structure and morphology were measured by X-ray diffraction(XRD), thermalgravity-differential thermal analysis(TG-DTA), mercury intrusion porosimetry(MIP) and scanning electron microscopy(SEM), respectively. The results indicate that grinding could not only improve the physical properties of the low quality fly ash on particle effect, but also improve hydration properties of the cementitious system from various aspects compared with raw low quality fly ash(RLFA). At the early stage of hydration, the low quanlity fly ash acts as almost inert material; but then at the later stage, high chemical activity, especially for ground low quality fly ash(GLFA), could be observed. It can accelerate the formation of hydration products containing more chemical bonded water, resulting in higher degree of cement hydration, thus denser microstructure and more reasonable pore size distribution, but the hydration heat in total is reduced. It can also delay the induction period, but the accelerating period is shortened and there is little influence on the second exothermic peak.展开更多
Nanocrystalline silver particles were produced by hydrogen reduction of silver nitrate aerosol droplets formed by high frequency ultrasonic generator.The dependences of the particle size,morphology and crystallite siz...Nanocrystalline silver particles were produced by hydrogen reduction of silver nitrate aerosol droplets formed by high frequency ultrasonic generator.The dependences of the particle size,morphology and crystallite size on the precursor concentration and the reaction temperature were investigated.Ultrasonic spray pyrolysis process was combined with hydrogen reduction to research the effects on the silver particle production.Nanocrystalline silver particles including slight oxide structure were prepared at temperature as low as 200 ℃ from silver nitrate under hydrogen atmosphere.X-ray diffraction（XRD） studies showed that pure silver particles were obtained above 200 ℃ reaction temperature.The crystallite sizes of the samples ranged from 29 to 47 nm.The results indicate that the crystallite sizes hardly ever depended on the reaction temperature.Crystallites slightly enlarged by increasing precursor concentration.SEM observations showed that particles were obtained in spherical morphology with particle sizes between 210 and 525 nm.Reaction temperature and precursor concentration strongly influenced the particle size.展开更多
In this study, SCM （supplementary cementitious materials）, such as nano silica, micro silica, fly ash and bottom ash, have been evaluated for optimal level of replacement as blending material in cement and concrete....In this study, SCM （supplementary cementitious materials）, such as nano silica, micro silica, fly ash and bottom ash, have been evaluated for optimal level of replacement as blending material in cement and concrete. The physical and chemical properties of the above materials were first analyzed. This study focused on compressive strength of concrete with different mixes at different ages. In many cases, products made with fly ash, micro silica, nano silica and bottom ash perform better than products made without them. Test results obtained in this study indicate that up to 5% nano silica, 10% micro silica, 20-30% fly ash and 10% bottom ash could be advantageously blended with cement without adversely affecting the strength. However, optimum levels of these materials are 1-3% nano silica, 3-8% micro silica, 10% fly ash and 5% of bottom ash when we consider the strength of concrete. All percentages are defined by weight unless otherwise mentioned.展开更多
基金Project(51208391) supported by the National Natural Science Foundation of China
文摘The hydration mechanism of low quality fly ash in cement-based materials was investigated. The hydration heat of the composite cementitious materials was determined by isothermal calorimetry, and the hydration products, quantity, pore structure and morphology were measured by X-ray diffraction(XRD), thermalgravity-differential thermal analysis(TG-DTA), mercury intrusion porosimetry(MIP) and scanning electron microscopy(SEM), respectively. The results indicate that grinding could not only improve the physical properties of the low quality fly ash on particle effect, but also improve hydration properties of the cementitious system from various aspects compared with raw low quality fly ash(RLFA). At the early stage of hydration, the low quanlity fly ash acts as almost inert material; but then at the later stage, high chemical activity, especially for ground low quality fly ash(GLFA), could be observed. It can accelerate the formation of hydration products containing more chemical bonded water, resulting in higher degree of cement hydration, thus denser microstructure and more reasonable pore size distribution, but the hydration heat in total is reduced. It can also delay the induction period, but the accelerating period is shortened and there is little influence on the second exothermic peak.
基金supported by The Scientific and Technological Research Council of Turkey with Grant No:107M505
文摘Nanocrystalline silver particles were produced by hydrogen reduction of silver nitrate aerosol droplets formed by high frequency ultrasonic generator.The dependences of the particle size,morphology and crystallite size on the precursor concentration and the reaction temperature were investigated.Ultrasonic spray pyrolysis process was combined with hydrogen reduction to research the effects on the silver particle production.Nanocrystalline silver particles including slight oxide structure were prepared at temperature as low as 200 ℃ from silver nitrate under hydrogen atmosphere.X-ray diffraction（XRD） studies showed that pure silver particles were obtained above 200 ℃ reaction temperature.The crystallite sizes of the samples ranged from 29 to 47 nm.The results indicate that the crystallite sizes hardly ever depended on the reaction temperature.Crystallites slightly enlarged by increasing precursor concentration.SEM observations showed that particles were obtained in spherical morphology with particle sizes between 210 and 525 nm.Reaction temperature and precursor concentration strongly influenced the particle size.
文摘In this study, SCM （supplementary cementitious materials）, such as nano silica, micro silica, fly ash and bottom ash, have been evaluated for optimal level of replacement as blending material in cement and concrete. The physical and chemical properties of the above materials were first analyzed. This study focused on compressive strength of concrete with different mixes at different ages. In many cases, products made with fly ash, micro silica, nano silica and bottom ash perform better than products made without them. Test results obtained in this study indicate that up to 5% nano silica, 10% micro silica, 20-30% fly ash and 10% bottom ash could be advantageously blended with cement without adversely affecting the strength. However, optimum levels of these materials are 1-3% nano silica, 3-8% micro silica, 10% fly ash and 5% of bottom ash when we consider the strength of concrete. All percentages are defined by weight unless otherwise mentioned.
