期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
EPDM绝缘自粘胶粘带的研究
1
作者 张卫勤 江之桢 +4 位作者 李庆国 谢德洲 高灵强 昝丽娜 李绍鹤 《橡胶工业》 CAS 北大核心 2003年第9期542-544,共3页
研究以EPDM为主体材料的绝缘自粘胶粘带配方。具体考察炭黑、IIR、萜烯树脂和环烷油的用量以及硫化条件对胶粘带胶料性能的影响。结果表明 ,炭黑N2 2 0用量不宜超过 2 0份 ,IIR替用量 10~ 2 0份为宜 ,萜烯增粘树脂 5~ 10份为宜 ,环烷... 研究以EPDM为主体材料的绝缘自粘胶粘带配方。具体考察炭黑、IIR、萜烯树脂和环烷油的用量以及硫化条件对胶粘带胶料性能的影响。结果表明 ,炭黑N2 2 0用量不宜超过 2 0份 ,IIR替用量 10~ 2 0份为宜 ,萜烯增粘树脂 5~ 10份为宜 ,环烷油 2 0份较好 ,较合理的硫化条件为 14 0℃ /10MPa× 10min。按此配方和工艺条件生产的自粘胶粘带可满足使用要求 ,但介电强度有待进一步提高。 展开更多
关键词 EPDM 绝缘自胶粘 绝缘材料 性能 胶料 硫化条件
下载PDF
胶粘剂在汽车喷涂工艺中的应用 被引量:2
2
作者 黄彭亮 许坚 蒋有辉 《汽车工艺师》 2023年第11期10-13,共4页
汽车涂装中,底材处理和涂料的选用是影响车身涂装质量的重要环节,涂装工艺的好坏直接决定了汽车品质和成本。近年来,随着国家环保政策的逐步实施,汽车行业逐渐向绿色环保发展,对于水性涂料和高固体分涂料等绿色环保产品的应用越来越广... 汽车涂装中,底材处理和涂料的选用是影响车身涂装质量的重要环节,涂装工艺的好坏直接决定了汽车品质和成本。近年来,随着国家环保政策的逐步实施,汽车行业逐渐向绿色环保发展,对于水性涂料和高固体分涂料等绿色环保产品的应用越来越广泛。水性胶粘剂具有施工便捷、低VOC排放等优点,在汽车涂装中得到了广泛应用。主要介绍了水性胶粘剂在汽车喷涂工艺中的应用现状及存在问题,并提出了改进措施。结果表明:使用水性胶粘剂在保证涂装质量和涂装成本的前提下,可以大大减少VOC排放,是一种非常有前景的绿色环保涂料。对于水性胶粘剂在汽车行业中的应用具有一定的指导意义和借鉴作用,并为企业解决类似问题提供了思路和解决方案。 展开更多
关键词 胶粘粘 汽车喷涂工艺 应用现状
下载PDF
我国鞋用胶粘剂的现状及发展趋势 被引量:5
3
作者 钟宁庆 《环球聚氨酯》 CAS 2004年第4期73-76,共4页
科学技术的进步使得新材料不断涌现,为传统的制鞋行业提供了许多有用之材,新材料的应用不但支持鞋类流行趋势的产生、功能的开发,也对胶粘剂的性能提出了新的要求。因此,随着制鞋工业的发展,也相应地促进了胶粘剂工业的技术进步和... 科学技术的进步使得新材料不断涌现,为传统的制鞋行业提供了许多有用之材,新材料的应用不但支持鞋类流行趋势的产生、功能的开发,也对胶粘剂的性能提出了新的要求。因此,随着制鞋工业的发展,也相应地促进了胶粘剂工业的技术进步和发展。 展开更多
关键词 中国 制鞋工业 胶鞋 乳胶 汽油胶 布鞋 合布胶 氯丁胶 皮鞋 旅游鞋 聚酰胺热熔胶 天然乳胶 氯丁乳胶 塑料鞋 聚氨酯胶 外底胶粘
下载PDF
无卤阻燃耐电痕化绝缘EPDM自粘胶粘带的研制 被引量:4
4
作者 夏明慧 冷静 +1 位作者 赵士伍 王海波 《橡胶工业》 CAS 2018年第10期1142-1145,共4页
探讨微胶囊白度化红磷、无机阻燃剂改性氢氧化铝和改性氢氧化镁、增粘剂聚异丁烯对无卤阻燃耐电痕化绝缘三元乙丙橡胶(EPDM)自粘胶粘带胶料性能的影响,并采用优化配方制备成品胶粘带。结果表明:微胶囊白度化红磷与改性氢氧化铝具有阻燃... 探讨微胶囊白度化红磷、无机阻燃剂改性氢氧化铝和改性氢氧化镁、增粘剂聚异丁烯对无卤阻燃耐电痕化绝缘三元乙丙橡胶(EPDM)自粘胶粘带胶料性能的影响,并采用优化配方制备成品胶粘带。结果表明:微胶囊白度化红磷与改性氢氧化铝具有阻燃协同效应,聚异丁烯对胶料绝缘性能影响较小;胶料的优化配方为EPDM100,改性高岭土30,氧化锌5,硬脂酸1,环烷油10,微胶囊白度化红磷10,改性氢氧化铝90,聚异丁烯20,其他5;采用优化配方制备的成品胶粘带阻燃等级达到V-0,绝缘性能和耐电痕化性能较好,各项性能达到设计要求。 展开更多
关键词 胶粘 三元乙丙橡胶 无卤阻燃 耐电痕化 绝缘性能
下载PDF
2种非沥青基防水卷材自粘层胶粘剂耐久性研究 被引量:1
5
作者 宋方方 黄立辉 +2 位作者 杨小育 胡全超 龚兴宇 《粘接》 CAS 2023年第10期26-28,共3页
对2种非沥青基防水卷材自粘层胶粘剂进行蠕变研究,利用时温等效原理研究2种胶粘剂的长期蠕变性能。结果表明:在常温25℃条件下,相对于丁基胶,热熔胶具有较好的抗蠕变性能,2种胶粘剂的蠕变性能均受温度影响;随着温度的升高,2者的蠕变形... 对2种非沥青基防水卷材自粘层胶粘剂进行蠕变研究,利用时温等效原理研究2种胶粘剂的长期蠕变性能。结果表明:在常温25℃条件下,相对于丁基胶,热熔胶具有较好的抗蠕变性能,2种胶粘剂的蠕变性能均受温度影响;随着温度的升高,2者的蠕变形变均增加,高温下热熔胶的抗蠕变效果仍优于丁基胶。由时温等效结果可知,当产生相同的蠕变形变量,相对于丁基胶,热熔胶需要较长的时间,即产生1%的蠕变形变,丁基胶需要0.6 h,热熔胶需要32.8 d;产生5%的蠕变形变,丁基胶需要2.7 d,热熔胶需要2.2年;产生20%蠕变形变,丁基胶需要39 d,而热熔胶需要11.4年,表明热熔胶具有较好的长期抗蠕变性能。 展开更多
关键词 非沥青基防水卷材 胶粘 热熔胶 丁基胶 蠕变性能
下载PDF
山西省应用化学研究院胶粘剂工程技术开发部胶粘剂系列产品
6
作者 刘建雄 《山西化工》 2003年第1期68-68,共1页
关键词 山西省应用化学研究院胶粘剂工程技术开发部 胶粘 系列产品 溶剂型 乳液型 橡塑-金属胶粘 混凝土工程胶粘
下载PDF
“快粘”丙烯酸胶粘剂
7
《化工文摘》 2001年第11期58-58,共1页
关键词 “快”丙烯酸胶粘 结强度 异味 安全性 产品开发 生产工艺
下载PDF
快干瓦楞纸箱淀粉粘合剂的制备 被引量:4
8
作者 魏月华 黎智萍 《中国胶粘剂》 CAS 1994年第6期28-31,共4页
本文介绍了瓦楞纸箱淀粉粘合剂在室温下的制备原理,配方及工艺并对各种粘合剂的干燥速度进行了比较。
关键词 胶粘 室温氧化 胶粘 瓦楞纸板
下载PDF
Experimental Observation on the Effects of Different Chitosan on Preventing Traumatic Peritoneal Adhesion in Rats
9
作者 ZHANG Zhi-liang XU Si-wei ZHOU Xie-lai 《Chinese Journal of Biomedical Engineering(English Edition)》 2005年第3期130-138,共9页
objective:The effects of different chitosan on preventing traumatic peritoneal adhesion in rats was studied in this paper. METHODS: 96 SD rats with injured vermiform process were randomly divided into 4 groups as foll... objective:The effects of different chitosan on preventing traumatic peritoneal adhesion in rats was studied in this paper. METHODS: 96 SD rats with injured vermiform process were randomly divided into 4 groups as follows: group A without any treatment as control, group B treated with chitosan gel, group C treated with pure chitosan film and group D treated with chiston film containing 50% gelatin. 2 and 4 weeks after surgery, 12 rats in each group were respectively belly opened to observe chitosan degradation and evaluate peritoneal adhesion, and the adhesive vermiform processes tissues were histopathologically observed. RESULTS: 1.Degradation in the group D was faster than that in the group C but slower than that in the group B. 2. 2 weeks after surgery the adhesion in the group B was milder than that in the control group(goup A) (P<0.05), but that in the group C and D (both P<0.05) were more severe than that in the control group . 3. 4 weeks after surgery , the adhesion in the group B was milder than that in the control group (P<0.05), but that in the group C and D (both P<0.05) were more severe than that in the control group , whereas, there was no significant difference between adhesion in the group C and group D (P>0.05). 4.Histopathological examinaiton indicated that: 2 weeks after surgery ,inflammatory cell infiltration and fibroplastic proliferation dominated in local lesion and the response was most severe on the serous coat, furthermore, the response in the control group was more severe than that in the group B, but milder than that in the group C and D; 4 weeks after surgery, fibroplastic proliferation dominated in local lesion in each group , moreover, the response in the control group was more severe than that in the group B but milder than that in the group C and D. What’s more, integrated fibrous membrane formed around implanted materials in the group C and D, and the fibrous membranes were thinner in the group C than that in the group D. CONCLUSION: 1.Chitosan gel has perfect effect in protecting traumatic peritoneal adhesion in rats. 2.Pure chitosan film could exacerbate peritoneal adhesion and chitosan containing gelatin could exacerbate peritoneal adhesion further. 展开更多
关键词 CHITOSAN GEL GELATIN peritoneal adhesion Film protecting adhesion
下载PDF
Multiple Coatings can Improve the Bond Durability of One-step Self-etching Adhesive to Primary Dentin
10
作者 Lin Ma Jian-feng Zhou +2 位作者 Quan Jing Ji-zhi Zhao Kuo Wan 《Chinese Medical Sciences Journal》 CAS CSCD 2012年第2期106-111,共6页
Objective To investigate whether multiple coatings can improve the bond durability of one-step self-etching adhesive to primary dentin. Methods Twelve caries-free human primary molars were randomly divided into 2 gro... Objective To investigate whether multiple coatings can improve the bond durability of one-step self-etching adhesive to primary dentin. Methods Twelve caries-free human primary molars were randomly divided into 2 groups. In group 1, each tooth was hemisected into 2 halves. One half was assigned to the control subgroup 1, which was bonded with a commercially available one-step self-etching adhesive according to the manufacturer's instruc- tions; the other half was assigned to experimental subgroup 1, in which the adhesive was applied three times before light curing. In group 2, one split half tooth was bonded with a commercially available one-step self-etching adhesive according to the manufacturer's instructions; for the other half, three layers of adhesive were applied with each successive layer of light curing. Specimens were stored in 0.9% NaC1 containing 0.02% sodium azide at 37℃ for 18 months and then were subjected to microtensile bond strength test and the fracture mode analysis. Results When the adhesive was applied three times before light curing, the bond strength of the ex- perimental subgroup 1 was significantly higher than that of the control subgroup 1 (47.46__+13.91 vs. 38.12+11.21 MPa, P〈O.05). When using the technique of applying multiple layers of adhesive with each successive layer of light curing, no difference was observed in bond strength between the control subgroup and the experimental subgroup (39.40+8.87 vs. 40.87-+9.33 MPa, P〉O.05). Conclusion Multiple coatings can improve the bond durability of one-step self-etching adhesive to primary dentin when using the technique of light-curing after applying 3 layers of adhesive. 展开更多
关键词 self-etching adhesive microtensile bond strength test primary dentin multiple coatings
下载PDF
野战条件下快速修补油箱有招
11
作者 宋双 《军用汽车管理》 2000年第3期64-64,共1页
关键词 野战条件 汽车维修 补工艺 HY-914胶粘补法 快速修补 油箱
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部