期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
在线胺液净化设备在溶剂脱硫系统的应用分析 被引量:3
1
作者 黄胜涛 夏正海 《石油和化工设备》 CAS 2012年第2期29-31,共3页
为解决胺液脱硫系统运行中存在的过滤器冲洗频繁、装置腐蚀、胺液发泡与损失等问题,提高胺液脱硫效率及清洁性,在脱硫系统中增设了在线胺液净化设备,使用一个月热稳态盐从5.62%降到3.1%,胺液泡沫高度消泡时间比从18/16cm/s降到3.5/5cm/s... 为解决胺液脱硫系统运行中存在的过滤器冲洗频繁、装置腐蚀、胺液发泡与损失等问题,提高胺液脱硫效率及清洁性,在脱硫系统中增设了在线胺液净化设备,使用一个月热稳态盐从5.62%降到3.1%,胺液泡沫高度消泡时间比从18/16cm/s降到3.5/5cm/s,腐蚀速率从2.35g/(m2h)降到0.05g/(m2h),结果表明系统内热稳态盐得到有效脱除,可使装置稳定运行。 展开更多
关键词 净化 热稳态盐 腐蚀 胺液溶剂 应用
下载PDF
Measurement and Correlation for Solubility of (S)-(+)-2,2-Dimethylcyclopropane Carbox Amide in Different Solvents 被引量:7
2
作者 石晓华 周彩荣 +1 位作者 高玉国 陈新志 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2006年第4期547-550,共4页
(S)-(+)-2,2-dimethylcyclopropane carbox amide is a key intermediate of Cilastatin, an inhibitor of dehydropeptidase-I. Its corresponding solid-liquid equilibrium data will provide essential support for industrial... (S)-(+)-2,2-dimethylcyclopropane carbox amide is a key intermediate of Cilastatin, an inhibitor of dehydropeptidase-I. Its corresponding solid-liquid equilibrium data will provide essential support for industrial design and further theoretical studies. The solubilities of (S)-(+)-2,2-dimethylcyclopropane carbox amide in toluene, dichloromethane, trichloromethane, ethyl acetate, ethanol and pure water at different temperature were measured using the synthetic method by a laser monitoring observation technique. The solubility data were correlated with the modified Apelblat equation.The calculated values were good in agreement with the experimental values. 展开更多
关键词 solid-liquid equilibrium SOLUBILITY (S)-(+)-2 2-dimethylcyclopropane carbox amide
下载PDF
Adsorption and Desorption Behavior of Tannic Acid in Aqueous Solution on Polyaniline Adsorbent 被引量:7
3
作者 WANG Jiahong JI Yan fen +2 位作者 DING Shaolan MA Hongrui HAN Xiaojing 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2013年第6期594-599,共6页
Tannic acid is generally considered as one of polyphenolic pollutants, which may cause severe threats to the environment. In this study, polyaniline adsorbent was synthesized by chemical oxidation to remove tannic aci... Tannic acid is generally considered as one of polyphenolic pollutants, which may cause severe threats to the environment. In this study, polyaniline adsorbent was synthesized by chemical oxidation to remove tannic acid in aqueous solutions. The adsorption amount of tannic acid varied greatly with pH of solution and strong adsorption was at pH 5.8-6.7. Coexisting cations, such as Na+, K+, and Ca2+, can enhance the adsorption of tannic acid on poly- aniline, which may be contributed to the electrostatic interaction between tannic acid and polyaniline. The adsorp- tion process could be well described by Langmuir model and the maximum adsorption capacity was 117.65 rag.g〈 at 35℃and pH 6.0. The thermodynamic parameters calculated from the adsorption isotherms indicate that the ad- sorption of tannic acid is spontaneous and endothermic process. The polyaniline saturated with tannic acid can be desorbed in alkaline solution and regenerated adsorbent can be used repeatedly with high adsorption capacity, which implies that polyaniline adsorbents have a great potential in water purification for the removal of tannic acid. 展开更多
关键词 POLYANILINE ADSORPTION DESORPTION tannic acid
下载PDF
Properties and evaluation of amidoxime-based UHMWPE fibrous adsorbent for extraction of uranium from seawater 被引量:17
4
作者 XING Zhe HU JiangTao +4 位作者 WANG MouHua ZHANG WenLi LI ShiNeng GAO QianHong WU GuoZhong 《Science China Chemistry》 SCIE EI CAS 2013年第11期1504-1509,共6页
An amidoxime-based ultra-high molecular weight polyethylene (UHMWPE) fibrous adsorbent was successfully prepared by T-irradiation-induced graft copolymerization of acrylonitrile (AN) and acrylic acid (AA), follo... An amidoxime-based ultra-high molecular weight polyethylene (UHMWPE) fibrous adsorbent was successfully prepared by T-irradiation-induced graft copolymerization of acrylonitrile (AN) and acrylic acid (AA), followed by amidoximation. The grafting of AN and AA on the UHMWPE fiber and the amidoximation of the grafted fiber were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The mechanical property of the original and modified UHMWPE fibers was compared by single-filament strength test. The adsorption property of the UHMWPE fibrous adsorbent was evaluated by adsorption test in uranyl nitrate solution and seawater. The surface of the modified UHMWPE fibers was covered by the grafting layer and became rough. The tensile strength of the amidoxime-based UHMWPE fibrous adsorbent was influenced by the absorbed dose and hydrochloric acid elution, but was independent of the grafting yield and amidoximation. The uranium adsorption amount of the amidoxime-based UHMWPE fibrous adsorbent after immersing in seawater for 42 days was 2.3 mg-U/g. 展开更多
关键词 ultra-high molecular weight polyethylene fiber ACRYLONITRILE acrylic acid radiation graft copolymerization amidoxi-mation uranium extraction
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部