For the carbon-neutral,a multi-carrier renewable energy system(MRES),driven by the wind,solar and geothermal,was considered as an effective solution to mitigate CO2emissions and reduce energy usage in the building sec...For the carbon-neutral,a multi-carrier renewable energy system(MRES),driven by the wind,solar and geothermal,was considered as an effective solution to mitigate CO2emissions and reduce energy usage in the building sector.A proper sizing method was essential for achieving the desired 100%renewable energy system of resources.This paper presented a bi-objective optimization formulation for sizing the MRES using a constrained genetic algorithm(GA)coupled with the loss of power supply probability(LPSP)method to achieve the minimal cost of the system and the reliability of the system to the load real time requirement.An optimization App has been developed in MATLAB environment to offer a user-friendly interface and output the optimized design parameters when given the load demand.A case study of a swimming pool building was used to demonstrate the process of the proposed design method.Compared to the conventional distributed energy system,the MRES is feasible with a lower annual total cost(ATC).Additionally,the ATC decreases as the power supply reliability of the renewable system decreases.There is a decrease of 24%of the annual total cost when the power supply probability is equal to 8%compared to the baseline case with 0%power supply probability.展开更多
The quality of methods for determining energy transits on the tie lines （lines that connect two neighboring power system） can have significant impact on business activity of the TSOs （transmission system operators...The quality of methods for determining energy transits on the tie lines （lines that connect two neighboring power system） can have significant impact on business activity of the TSOs （transmission system operators）. Existing law regulation is not enough precise regarding definition of methods for metering energy transits （energy interchanged between neighboring TSOs）. This paper analyses disadvantages of method for line losses metering with electric meters and suggests introduction of the measured value corrections.展开更多
The combined use of dry cooling(DC) system and dedicated ventilation(DV) system to decouple cooling and dehumidification process for energy efficiency was proposed for subtropical climates like Hong Kong. In this stud...The combined use of dry cooling(DC) system and dedicated ventilation(DV) system to decouple cooling and dehumidification process for energy efficiency was proposed for subtropical climates like Hong Kong. In this study, the energy performance and condensation risk of the use of DCDV system were examined by analyzing its application in a typical office building in Hong Kong. Through hour-by-hour simulation using actual equipment performance data and realistic building and system characteristics, it was found that with the use of DCDV system, the annual energy consumption could be reduced by 54% in comparison with the conventional system(constant air volume with reheat system). In respect of condensation risk, it was found that the annual frequency of occurrence of condensation on DC coil was 35 h. Additional simulations were conducted to examine the influence of different parameters on the condensation risk of DCDV system. Measures to ensure condensate-free on DC coil were also discussed.展开更多
During the process of preparation and occurrence of a large earthquake, the stress-strain state along the fault zone has close relation with the weak seismicity around the fault zone. The seismic energy release near t...During the process of preparation and occurrence of a large earthquake, the stress-strain state along the fault zone has close relation with the weak seismicity around the fault zone. The seismic energy release near the fault zone before an earthquake can better reflect the dynamic process of earthquake preparation. Thus, in this paper, the method of natural orthogonal function expansion has been adopted to discuss the time variation about the energy field of the seismic activity along the Longmenshan fault zone before the Wenchuan MsS. 0 earthquake, 2008. The results show that evident short-term rise changes appeared in the time factors of the typical field corresponding to several key eigenvalues of the energy field along the Longmenshan fault zone before the Wenchuan earthquake, probably being the short-term anomaly message for this earthquake. Through contrastive analysis of earthquake examples such as the 1976 Tangshan earthquake, the authors think that the study of time variation of energy field of seismicity along active fault zone will be helpful for conducting intentional and intensive earthquake monitoring and forecast in active fault regions with high seismic risk based on medium- and long-term earthquake trend judgment.展开更多
The Iraqi climate is extremely hot and arid zone covers a belt between latitude （29°N to 36°N）. The energy required for air conditioning of Iraqi buildings is about 60% of the entire energy consumption in ...The Iraqi climate is extremely hot and arid zone covers a belt between latitude （29°N to 36°N）. The energy required for air conditioning of Iraqi buildings is about 60% of the entire energy consumption in buildings. This research deals with the possibility of using different technics for the reducing energy consumption in buildings by blocking or eliminates the effect of direct solar radiation in summer season. This study deals with different local insulation materials which were added to the south face of walls surface of Iraqi buildings, as well as built water spray system upon the exterior roof surface to minimize the effect of incident solar radiation upon the roofs and wall surfaces. The results showed that thermal conductivity of local insulation materials （papyrus） are very low, also the results showed that when using water spray roof system, gives good indication to use this method in hot arid rejoins.展开更多
In Turkey, most of the common type projects of mass production residential buildings are being developed and constructed by TOK1 （Housing Development Administration of Turkey）. These buildings, in which energy effic...In Turkey, most of the common type projects of mass production residential buildings are being developed and constructed by TOK1 （Housing Development Administration of Turkey）. These buildings, in which energy efficient approach has been disregarded for years, cause to gradually increase on heating and cooling energy consumptions. In regards to national economics, it is essential to evaluate energy efficiency and to develop suggestions to decrease energy consumptions in residential buildings. To achieve appropriate solutions, cost evaluation also becomes necessary. Therefore, this paper aims to introduce a study which serves the purpose of producing a choice of energy efficient solutions in order to reduce energy consumptions and energy cost. In this study, different heating and cooling energy efficient scenarios have been developed for a selected residential building, constructed by TOKI, for climatic zones of Turkey. For each scenario, energy simulations have been executed by means of the simulation program--DesignBuilder, the user-friendly visual interface of EnergyPlus, and cost analysis has been carried out by using the net present value and discounted payback period method. As a result, energy and cost effective solutions have been presented and discussed for different climatic zones.展开更多
The band structure of the confined states is calculated for Si/SiGe multi-quantum well infrared photodetector(M-QWIP).The influence of the Ge component in pseudosubstrate on the energy band structure of Si/Si0.54Ge0.4...The band structure of the confined states is calculated for Si/SiGe multi-quantum well infrared photodetector(M-QWIP).The influence of the Ge component in pseudosubstrate on the energy band structure of Si/Si0.54Ge0.46 multi-quantum wells(MQWs) is investigated.It is found that the high energy levels in the MQWs move up while the low energy levels move down as the Ge component in pseudosubstrate increases.The influence of the barrier width on the energy band structure of MQWs is also studied based on the 6 × 6 k.p method.The results show that the Si barrier between 5 nm and 10 nm is optimized to enhance the intersubband absorption in the MQWs.展开更多
The performance of broadband polarizing beam splitters(PBSs) is sensitive to the incident angle.By taking account of the spectrum of the laser source and using the needle optimization method,a large acceptance angle P...The performance of broadband polarizing beam splitters(PBSs) is sensitive to the incident angle.By taking account of the spectrum of the laser source and using the needle optimization method,a large acceptance angle PBS for laser-based displays is designed.The average degrees of polarization in transmission and reflection can reach 0.989 and 0.980 for an acceptance angle of 13.6?in air using two materials,while better results of 0.993 and 0.989 for an acceptance angle of 14.8?in air are attained when three common materials are used.Both designs consist of 40 layers.展开更多
Two new conjugated copolymers, PBDT-T6-TTF and PBDT-T12-TTF, were derived from a novel 4-fluorobenzoyl thienothi- ophene （TTF）. In addition, two types of benzodithiophene （BDT） units with 2,3-dihexylthienyl （T6）...Two new conjugated copolymers, PBDT-T6-TTF and PBDT-T12-TTF, were derived from a novel 4-fluorobenzoyl thienothi- ophene （TTF）. In addition, two types of benzodithiophene （BDT） units with 2,3-dihexylthienyl （T6） and 2,3-didodecylthienyl （T12） substituents, respectively, were successfully synthesized. The effect of the dual two-dimensional （2D） substitutions of the building blocks upon the optoelectronic properties of the polymers was investigated. Generally, the two polymers exhibited good solubility and broad absorption, showing similar optical band gaps of ~1.53 eV. However, PBDT-T6-TTF with its shorter alkyl chain length possessed a larger extinction coefficient in thin solid film. The highest occupied molecular orbital （HOMO） level of PBDT-T6-TTF was located at -5.38 eV while that of PBDT-T12-TTF was at -5.51 eV. In space charge-limited- current （SCLC） measurement, PBDT-T6-TTF and PBDT-T12-TTF displayed respective hole mobilities of 3.0~10-~ and 1.6x10 5 cm2 V-1 s-l. In polymer solar cells, PBDT-T6-TTF and PBDT-T12-TTF showed respective power conversion efficiencies （PCEs） of 2.86% and 1.67%. When 1,8-diiodooctane （DIO） was used as the solvent additive, the PCE of PBDT-T6-TTF was remarkably elevated to 4.85%, but the use of DIO for the PBDT-T12-TTF-blend film resulted in a lower PCE of 0.91%. Atomic force microscopy （AFM） indicated that the superior efficiency of PBDT-T6-TTF with 3% DIO （v/v） should be related to the better continuous phase separation of the blend film. Nevertheless, the morphology of the PBDT-T12-TTF deteriorated when the 3% DIO （v/v） was added. Our results suggest that the alkyl-chain length on the 2D BDT units play an important role in determining the optoelectronic properties of dual 2D BDT-TT-based polymers.展开更多
基金Project(52108101)supported by the National Natural Science Foundation of ChinaProjects(2020GK4057,2021JJ40759)supported by the Hunan Provincial Science and Technology Department,China。
文摘For the carbon-neutral,a multi-carrier renewable energy system(MRES),driven by the wind,solar and geothermal,was considered as an effective solution to mitigate CO2emissions and reduce energy usage in the building sector.A proper sizing method was essential for achieving the desired 100%renewable energy system of resources.This paper presented a bi-objective optimization formulation for sizing the MRES using a constrained genetic algorithm(GA)coupled with the loss of power supply probability(LPSP)method to achieve the minimal cost of the system and the reliability of the system to the load real time requirement.An optimization App has been developed in MATLAB environment to offer a user-friendly interface and output the optimized design parameters when given the load demand.A case study of a swimming pool building was used to demonstrate the process of the proposed design method.Compared to the conventional distributed energy system,the MRES is feasible with a lower annual total cost(ATC).Additionally,the ATC decreases as the power supply reliability of the renewable system decreases.There is a decrease of 24%of the annual total cost when the power supply probability is equal to 8%compared to the baseline case with 0%power supply probability.
文摘The quality of methods for determining energy transits on the tie lines （lines that connect two neighboring power system） can have significant impact on business activity of the TSOs （transmission system operators）. Existing law regulation is not enough precise regarding definition of methods for metering energy transits （energy interchanged between neighboring TSOs）. This paper analyses disadvantages of method for line losses metering with electric meters and suggests introduction of the measured value corrections.
基金Supported by Competitive Earmarked Research Grant of Hong Kong Government(CERG No.522709)
文摘The combined use of dry cooling(DC) system and dedicated ventilation(DV) system to decouple cooling and dehumidification process for energy efficiency was proposed for subtropical climates like Hong Kong. In this study, the energy performance and condensation risk of the use of DCDV system were examined by analyzing its application in a typical office building in Hong Kong. Through hour-by-hour simulation using actual equipment performance data and realistic building and system characteristics, it was found that with the use of DCDV system, the annual energy consumption could be reduced by 54% in comparison with the conventional system(constant air volume with reheat system). In respect of condensation risk, it was found that the annual frequency of occurrence of condensation on DC coil was 35 h. Additional simulations were conducted to examine the influence of different parameters on the condensation risk of DCDV system. Measures to ensure condensate-free on DC coil were also discussed.
文摘During the process of preparation and occurrence of a large earthquake, the stress-strain state along the fault zone has close relation with the weak seismicity around the fault zone. The seismic energy release near the fault zone before an earthquake can better reflect the dynamic process of earthquake preparation. Thus, in this paper, the method of natural orthogonal function expansion has been adopted to discuss the time variation about the energy field of the seismic activity along the Longmenshan fault zone before the Wenchuan MsS. 0 earthquake, 2008. The results show that evident short-term rise changes appeared in the time factors of the typical field corresponding to several key eigenvalues of the energy field along the Longmenshan fault zone before the Wenchuan earthquake, probably being the short-term anomaly message for this earthquake. Through contrastive analysis of earthquake examples such as the 1976 Tangshan earthquake, the authors think that the study of time variation of energy field of seismicity along active fault zone will be helpful for conducting intentional and intensive earthquake monitoring and forecast in active fault regions with high seismic risk based on medium- and long-term earthquake trend judgment.
文摘The Iraqi climate is extremely hot and arid zone covers a belt between latitude （29°N to 36°N）. The energy required for air conditioning of Iraqi buildings is about 60% of the entire energy consumption in buildings. This research deals with the possibility of using different technics for the reducing energy consumption in buildings by blocking or eliminates the effect of direct solar radiation in summer season. This study deals with different local insulation materials which were added to the south face of walls surface of Iraqi buildings, as well as built water spray system upon the exterior roof surface to minimize the effect of incident solar radiation upon the roofs and wall surfaces. The results showed that thermal conductivity of local insulation materials （papyrus） are very low, also the results showed that when using water spray roof system, gives good indication to use this method in hot arid rejoins.
文摘In Turkey, most of the common type projects of mass production residential buildings are being developed and constructed by TOK1 （Housing Development Administration of Turkey）. These buildings, in which energy efficient approach has been disregarded for years, cause to gradually increase on heating and cooling energy consumptions. In regards to national economics, it is essential to evaluate energy efficiency and to develop suggestions to decrease energy consumptions in residential buildings. To achieve appropriate solutions, cost evaluation also becomes necessary. Therefore, this paper aims to introduce a study which serves the purpose of producing a choice of energy efficient solutions in order to reduce energy consumptions and energy cost. In this study, different heating and cooling energy efficient scenarios have been developed for a selected residential building, constructed by TOKI, for climatic zones of Turkey. For each scenario, energy simulations have been executed by means of the simulation program--DesignBuilder, the user-friendly visual interface of EnergyPlus, and cost analysis has been carried out by using the net present value and discounted payback period method. As a result, energy and cost effective solutions have been presented and discussed for different climatic zones.
基金supported by the National Natural Science Foundation of China (No.60837001)the Major State Basic Research Development Program of China (No.2007CB613404)
文摘The band structure of the confined states is calculated for Si/SiGe multi-quantum well infrared photodetector(M-QWIP).The influence of the Ge component in pseudosubstrate on the energy band structure of Si/Si0.54Ge0.46 multi-quantum wells(MQWs) is investigated.It is found that the high energy levels in the MQWs move up while the low energy levels move down as the Ge component in pseudosubstrate increases.The influence of the barrier width on the energy band structure of MQWs is also studied based on the 6 × 6 k.p method.The results show that the Si barrier between 5 nm and 10 nm is optimized to enhance the intersubband absorption in the MQWs.
基金supported by the National Natural Science Foundation of China (No.50802080)the Natural Science Foundation of Fujian Province (No.2010J01349)
文摘The performance of broadband polarizing beam splitters(PBSs) is sensitive to the incident angle.By taking account of the spectrum of the laser source and using the needle optimization method,a large acceptance angle PBS for laser-based displays is designed.The average degrees of polarization in transmission and reflection can reach 0.989 and 0.980 for an acceptance angle of 13.6?in air using two materials,while better results of 0.993 and 0.989 for an acceptance angle of 14.8?in air are attained when three common materials are used.Both designs consist of 40 layers.
基金financially supported by the National Natural Science Foundation of China(21225418 and 51173048)the National Basic Research Program of China(2013CB834705 and 2014CB643505)GDUPS(2013)
文摘Two new conjugated copolymers, PBDT-T6-TTF and PBDT-T12-TTF, were derived from a novel 4-fluorobenzoyl thienothi- ophene （TTF）. In addition, two types of benzodithiophene （BDT） units with 2,3-dihexylthienyl （T6） and 2,3-didodecylthienyl （T12） substituents, respectively, were successfully synthesized. The effect of the dual two-dimensional （2D） substitutions of the building blocks upon the optoelectronic properties of the polymers was investigated. Generally, the two polymers exhibited good solubility and broad absorption, showing similar optical band gaps of ~1.53 eV. However, PBDT-T6-TTF with its shorter alkyl chain length possessed a larger extinction coefficient in thin solid film. The highest occupied molecular orbital （HOMO） level of PBDT-T6-TTF was located at -5.38 eV while that of PBDT-T12-TTF was at -5.51 eV. In space charge-limited- current （SCLC） measurement, PBDT-T6-TTF and PBDT-T12-TTF displayed respective hole mobilities of 3.0~10-~ and 1.6x10 5 cm2 V-1 s-l. In polymer solar cells, PBDT-T6-TTF and PBDT-T12-TTF showed respective power conversion efficiencies （PCEs） of 2.86% and 1.67%. When 1,8-diiodooctane （DIO） was used as the solvent additive, the PCE of PBDT-T6-TTF was remarkably elevated to 4.85%, but the use of DIO for the PBDT-T12-TTF-blend film resulted in a lower PCE of 0.91%. Atomic force microscopy （AFM） indicated that the superior efficiency of PBDT-T6-TTF with 3% DIO （v/v） should be related to the better continuous phase separation of the blend film. Nevertheless, the morphology of the PBDT-T12-TTF deteriorated when the 3% DIO （v/v） was added. Our results suggest that the alkyl-chain length on the 2D BDT units play an important role in determining the optoelectronic properties of dual 2D BDT-TT-based polymers.
