We have established a set of laboratory measurements which is used for capturing element gammma spectrum. Standard captured gamma ray spectra for ten elements, including Si, Ca, Fe, are obtained using the measurements...We have established a set of laboratory measurements which is used for capturing element gammma spectrum. Standard captured gamma ray spectra for ten elements, including Si, Ca, Fe, are obtained using the measurements for the first time in China. We also simulated the capture gamma ray spectra of the ten elements using Monte Carlo methodology with the same parameters of our experimental measurements. Comparing the experiment and simulation results with the data from the International Atomic Energy Agency＇s Nuclear Data Center, we obtained the standard captured gamma ray spectra of the ten elements, which, as calibration spectra, are used to calibrate the raw spectrum in data processing. This method solved the key problem during the conversion from the original measuring spectrum to the yield of each element in the data processing. The method can effectively improve the accuracy of the element yield calculation.展开更多
In this study,the gamma-ray spectrum of single elemental capture spectrum log was simulated.By numerical simulation we obtain a single-element neutron capture gamma spectrum.The neutron and photon transportable proces...In this study,the gamma-ray spectrum of single elemental capture spectrum log was simulated.By numerical simulation we obtain a single-element neutron capture gamma spectrum.The neutron and photon transportable processes were simulated using the Monte Carlo N-Particle Transport Code System(MCNP),where an Am–Be neutron source generated the neutrons and thermal neutron capture reactions with the stratigraphic elements.The characteristic gamma rays and the standard gamma spectra were recorded,from analyzing of the characteristic spectra analysis we obtain the ten elements in the stratum,such as Si,Ca,Fe,S,Ti,Al,K,Na,Cl,and Ba.Comparing with single elemental capture gamma spectrum of Schlumberger,the simulated characteristic peak and the spectral change results are in good agreement with Schlumberger.The characteristic peak positions observed also consistent with the data obtained from the National Nuclear Data Center of the International Atomic Energy Agency.The neutron gamma spectrum results calculated using this simple method have practical applications.They also serve as an reference for data processing using other types of element logging tools.展开更多
Cementing mechanism of bio-phosphate cement was investigated by Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), thermogravimetric-differential scanning calorimetry(TG-DSC) analysi...Cementing mechanism of bio-phosphate cement was investigated by Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), thermogravimetric-differential scanning calorimetry(TG-DSC) analysis and scanning electron microscopy(SEM). The results of FTIR and XPS show that Si-O bond and Si(2p) electron binding energy in sandstone cemented via chemical and microbiological methods are changed by the binding effects of barium hydrogen phosphate with quartz sand. Compared with barium hydrogen phosphate precipitated in solution, there were higher decomposition temperatures or melting points in sandstone. The FTIR, XPS, and TG-DSC results indicate that the microbial-induced and chemical precipitation of barium hydrogen phosphate can interact with quartz sand to generate van der Waals bond, which plays a role in the binding function between loose sand particles and barium hydrogen phosphate. SEM results show that barium hydrogen phosphate after chemical precipitation in sandstone has better dispersion than microbiological deposition. Therefore, barium hydrogen phosphate via chemical precipitation did not bind loose sand particles into sandstone.展开更多
基金sponsored by the National S&T Major Special Project(No. 2011ZX05020-008)
文摘We have established a set of laboratory measurements which is used for capturing element gammma spectrum. Standard captured gamma ray spectra for ten elements, including Si, Ca, Fe, are obtained using the measurements for the first time in China. We also simulated the capture gamma ray spectra of the ten elements using Monte Carlo methodology with the same parameters of our experimental measurements. Comparing the experiment and simulation results with the data from the International Atomic Energy Agency＇s Nuclear Data Center, we obtained the standard captured gamma ray spectra of the ten elements, which, as calibration spectra, are used to calibrate the raw spectrum in data processing. This method solved the key problem during the conversion from the original measuring spectrum to the yield of each element in the data processing. The method can effectively improve the accuracy of the element yield calculation.
基金supported by The National S&T Major Special Project(No.2011ZX05020-008)
文摘In this study,the gamma-ray spectrum of single elemental capture spectrum log was simulated.By numerical simulation we obtain a single-element neutron capture gamma spectrum.The neutron and photon transportable processes were simulated using the Monte Carlo N-Particle Transport Code System(MCNP),where an Am–Be neutron source generated the neutrons and thermal neutron capture reactions with the stratigraphic elements.The characteristic gamma rays and the standard gamma spectra were recorded,from analyzing of the characteristic spectra analysis we obtain the ten elements in the stratum,such as Si,Ca,Fe,S,Ti,Al,K,Na,Cl,and Ba.Comparing with single elemental capture gamma spectrum of Schlumberger,the simulated characteristic peak and the spectral change results are in good agreement with Schlumberger.The characteristic peak positions observed also consistent with the data obtained from the National Nuclear Data Center of the International Atomic Energy Agency.The neutron gamma spectrum results calculated using this simple method have practical applications.They also serve as an reference for data processing using other types of element logging tools.
基金supported by the National Natural Science Foundation of China(Grant No.51372038)Scientific Research Foundation of Graduate School of Southeast University(Grant No.YBJJ1453)333 Project of Jiangsu Province
文摘Cementing mechanism of bio-phosphate cement was investigated by Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), thermogravimetric-differential scanning calorimetry(TG-DSC) analysis and scanning electron microscopy(SEM). The results of FTIR and XPS show that Si-O bond and Si(2p) electron binding energy in sandstone cemented via chemical and microbiological methods are changed by the binding effects of barium hydrogen phosphate with quartz sand. Compared with barium hydrogen phosphate precipitated in solution, there were higher decomposition temperatures or melting points in sandstone. The FTIR, XPS, and TG-DSC results indicate that the microbial-induced and chemical precipitation of barium hydrogen phosphate can interact with quartz sand to generate van der Waals bond, which plays a role in the binding function between loose sand particles and barium hydrogen phosphate. SEM results show that barium hydrogen phosphate after chemical precipitation in sandstone has better dispersion than microbiological deposition. Therefore, barium hydrogen phosphate via chemical precipitation did not bind loose sand particles into sandstone.
