期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
采用统计能量解析法(SEA)预测车内噪声的研究 被引量:5
1
作者 阿久津 勝則 向云(译) 刘凤刚(校) 阎锋(校) 《国外铁道车辆》 2008年第5期14-18,共5页
介绍了统计能量解析法(SEA)在铁道车辆的车内噪声预测方面的研究成果,阐述了近郊型车辆车内噪声预测中采用的SEA实例,并将其结果与定置试验及运行试验中获得的车辆内外噪声级测定结果进行了比较,显示出SEA的实用性。
关键词 铁道车辆 统计能量解析法 车内噪声 日本
下载PDF
铸拉工艺生产钢铝复合导线中拉拔变形的能量法解析
2
作者 许光明 崔建忠 《轻合金加工技术》 CAS 北大核心 1999年第3期27-30,共4页
根据铸拉工艺的特点和钢、铝变形性能,假设钢丝为刚性体,同时,假设变形体铝层的流动速度在截面上呈二次函数分布。在此基础上利用流函数建立了变形区速度场,并利用计算机对变形能进行求极小值,得到了变形区的速度分布及拉拔力。计... 根据铸拉工艺的特点和钢、铝变形性能,假设钢丝为刚性体,同时,假设变形体铝层的流动速度在截面上呈二次函数分布。在此基础上利用流函数建立了变形区速度场,并利用计算机对变形能进行求极小值,得到了变形区的速度分布及拉拔力。计算值与实测值比较吻合。 展开更多
关键词 铸拉 钢铅复合导线 拉拔变形 能量解析
下载PDF
无动力跳跃式跨大气层飞行的可行性研究 被引量:1
3
作者 何烈堂 柳军 +1 位作者 侯中喜 陈小庆 《弹箭与制导学报》 CSCD 北大核心 2008年第2期155-157,164,共4页
针对跳跃式跨大气层飞行弹道的特殊性,建立了其飞行动力学模型,在此基础上,利用弹道仿真的方法分析了跳跃飞行的可行性,而后用能量解析的方法进一步分析了其可行性,最后研究了跳跃飞行所需求的大升阻比的可实现性问题,得出无动力跳跃式... 针对跳跃式跨大气层飞行弹道的特殊性,建立了其飞行动力学模型,在此基础上,利用弹道仿真的方法分析了跳跃飞行的可行性,而后用能量解析的方法进一步分析了其可行性,最后研究了跳跃飞行所需求的大升阻比的可实现性问题,得出无动力跳跃式飞行是可行的。所得结论对跳跃飞行成为又一重要机动突防手段提供了一定的参考依据。 展开更多
关键词 跨大气层飞行 弹道仿真 机动突防 乘波构型 跳跃弹道 能量解析法
下载PDF
AlC_n及AlC_n^+(n=1~4)原子簇的理论研究 被引量:5
4
作者 李光平 张华北 +1 位作者 田安民 鄢国森 《物理化学学报》 SCIE CAS CSCD 北大核心 1995年第3期211-217,共7页
用abinitio能量解析梯度法,在UHF(RHF)/3-21G水平上优化得到AlCn,AlCn+(n=1~3)的四十三个构型,在RHF(UHF)/3-21G水平上优化得到AlC4,AlC4+的二十六个构型,CISD能量.从能量角度所研究的AlCn,AlCn+(n=1~4)构型中,... 用abinitio能量解析梯度法,在UHF(RHF)/3-21G水平上优化得到AlCn,AlCn+(n=1~3)的四十三个构型,在RHF(UHF)/3-21G水平上优化得到AlC4,AlC4+的二十六个构型,CISD能量.从能量角度所研究的AlCn,AlCn+(n=1~4)构型中,最稳定的构型均是线性构型,且Al全都在端点上,同文献报导的理论和实验结果相一致.此外,还研究了原子簇的离子化能,原子平均结合能以及原子簇的碎片化通道和碎片化能,并计算了上述最稳定构型的谐振动光谱常数. 展开更多
关键词 从头算 原子簇 能量解析梯度
下载PDF
Exciting Forces for a Wave Energy Device Consisting of a Pair of Coaxial Cylinders in Water of Finite Depth 被引量:1
5
作者 Mohammad Hassan Swaroop Nandan Bora 《Journal of Marine Science and Application》 2013年第3期315-324,共10页
Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by th... Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results. 展开更多
关键词 DIFFRACTION finite depth virtual boundary exciting force wave energy device coaxial cylinder
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部