Coronary stents are metal coils or mesh tubes delivered to blocked vessels through catheters, whic Recently, special drugs h are expanded by balloons to reopen and scaffold target vessels. are carried by stents （drug...Coronary stents are metal coils or mesh tubes delivered to blocked vessels through catheters, whic Recently, special drugs h are expanded by balloons to reopen and scaffold target vessels. are carried by stents （drug-eluting stents） to further reduce instent restenosis rate after stenting procedure. However, continual study on biomechanical characteristics of stents is necessary provide a more suitable drug loading for better interactions between stents and tissue, or to platform for drug-eluting stents. The purpose of this paper is to show how finite element methods can be used to study cell area and strut distribution changes of bent coronary stents. A same bending deformation was applied to two commercial coronary stent models by a rigid curved vessel. Results show that the stent design influenced the changes of cell area and strut distribution under bending situation. The stent with links had more cell area changes at outer curvature, and the stent with peak-peak （ 〉 〈 ） strut design could have strut contact and overlapping at inner curvature. In conclusion, this finite element method can be used to study and compare cell area and strut distribution changes of bent stents, and to provide a convenient tool for designers in testing and improving biomechanical characteristics of new stents.展开更多
Plasma-assisted ignition is a promising technology to improve engine performance. Nanosecond repetitive pulsed discharge is widely used in plasma-assisted ignition owing to its chemical activations and thermal and hyd...Plasma-assisted ignition is a promising technology to improve engine performance. Nanosecond repetitive pulsed discharge is widely used in plasma-assisted ignition owing to its chemical activations and thermal and hydrodynamic expansions. However, the influence of ultrafast heating and hydrodynamic effects on the development of the rich-mixture ignition kernel is largely unknown. The present study aims to illustrate these effects using electrical and schlieren measurement. The number and the frequency of discharge pulses are exactly controlled to establish the relationship among the discharge energy, frequency, and rich-mixture ignition-kernel characteristics. The evolution of the ignition kernel in the early stage is mainly dominated by the discharge energy and frequency, i.e., a greater energy and a higher frequency yield a larger ignition kernel. Moreover, the influence of both the energy and frequency on the ignition kernel gradually disappears as the ignition kernel develops. According to the experimental data and theoretical analysis, the calculated laminar burning velocity is 0.319 m/s with a Markstein length of 13.43±0.11 cm when the voltage is 5.9 k V, the frequency is 3 k Hz, and the equivalence ratio is 1.3. This result indicates that the rich-mixture flame is stable in the early stage of ignition.展开更多
文摘Coronary stents are metal coils or mesh tubes delivered to blocked vessels through catheters, whic Recently, special drugs h are expanded by balloons to reopen and scaffold target vessels. are carried by stents （drug-eluting stents） to further reduce instent restenosis rate after stenting procedure. However, continual study on biomechanical characteristics of stents is necessary provide a more suitable drug loading for better interactions between stents and tissue, or to platform for drug-eluting stents. The purpose of this paper is to show how finite element methods can be used to study cell area and strut distribution changes of bent coronary stents. A same bending deformation was applied to two commercial coronary stent models by a rigid curved vessel. Results show that the stent design influenced the changes of cell area and strut distribution under bending situation. The stent with links had more cell area changes at outer curvature, and the stent with peak-peak （ 〉 〈 ） strut design could have strut contact and overlapping at inner curvature. In conclusion, this finite element method can be used to study and compare cell area and strut distribution changes of bent stents, and to provide a convenient tool for designers in testing and improving biomechanical characteristics of new stents.
基金supported by the National Natural Science Foundation of China(Grant Nos.51336011&51522606)the Science Foundation for the Author of National Excellent Doctoral Dissertation of China(Grant No.201172)
文摘Plasma-assisted ignition is a promising technology to improve engine performance. Nanosecond repetitive pulsed discharge is widely used in plasma-assisted ignition owing to its chemical activations and thermal and hydrodynamic expansions. However, the influence of ultrafast heating and hydrodynamic effects on the development of the rich-mixture ignition kernel is largely unknown. The present study aims to illustrate these effects using electrical and schlieren measurement. The number and the frequency of discharge pulses are exactly controlled to establish the relationship among the discharge energy, frequency, and rich-mixture ignition-kernel characteristics. The evolution of the ignition kernel in the early stage is mainly dominated by the discharge energy and frequency, i.e., a greater energy and a higher frequency yield a larger ignition kernel. Moreover, the influence of both the energy and frequency on the ignition kernel gradually disappears as the ignition kernel develops. According to the experimental data and theoretical analysis, the calculated laminar burning velocity is 0.319 m/s with a Markstein length of 13.43±0.11 cm when the voltage is 5.9 k V, the frequency is 3 k Hz, and the equivalence ratio is 1.3. This result indicates that the rich-mixture flame is stable in the early stage of ignition.
