Vestibulo-ocular reflex(VOR) is an important biological reflex that controls eye movement to ensure clear vision while the head is in motion.Nowadays,VOR measurement is commonly done with a video head impulse test bas...Vestibulo-ocular reflex(VOR) is an important biological reflex that controls eye movement to ensure clear vision while the head is in motion.Nowadays,VOR measurement is commonly done with a video head impulse test based on a velocity gain algorithm or a position gain algorithm,in which velocity gain is a VOR calculation on head and eye velocity,whereas position gain is calculated from head and eye position.The aim of this work is first to compare the two algorithms' performance and to detect covert catch-up saccade,then to propose a stand-alone recommendation application for the patient's diagnosis.In the first experiment,for ipsilesional and contralesional sides,the calculated position gain(0.94±0.17) is higher than velocity gain(0.84±0.19).Moreover,gain asymmetry of both lesion and intact sides using velocity gain is mostly higher than that from using position gain(four out of five subjects).Consequently,for subjects who have unilateral vestibular neuritis diagnosed from clinical symptoms and a vestibular function test,vestibular weakness is depicted by velocity gain much better than by position gain.Covert catch-up saccade and position gain then are used as inputs for recommendation applications.展开更多
This paper presents the control ofa WECS （wind energy conversion system）, equipped with a DFIG （doubly fed induction generator）, for maximum power generation and power quality improvement simultaneously. The propo...This paper presents the control ofa WECS （wind energy conversion system）, equipped with a DFIG （doubly fed induction generator）, for maximum power generation and power quality improvement simultaneously. The proposed control algorithm is applied to a DFIG whose stator is directly connected to the grid and the rotor is connected to the grid through a back-to-back AC-DC-AC PWM （pulse width modulation） converter. The RSC （rotor side converter） is controlled in such a way to extract a maximum power, for a wide range of wind speed. The GSC （grid side converter） is controlled in order to filter harmonic currents of a nonlinear load coupled at the PCC （point of common coupling） and ensure smooth DC bus voltage. Simulation results show that the wind turbine can operate at its optimum energy for a wide range of wind speed and power quality improvement is achieved.展开更多
In order to satisfy the requirement of ECRH for power supply, pulse high voltage （ HV ） power supply has been developed. The main parameters of the power are： output voltage -55 kV, output current 25 -2 A, stabilit...In order to satisfy the requirement of ECRH for power supply, pulse high voltage （ HV ） power supply has been developed. The main parameters of the power are： output voltage -55 kV, output current 25 -2 A, stability ±0.5%, pulse duration 1 s, the leading edge and lagging edge of the pulse is about 40 μs and so on. On the other hand, the system should have preferable protective capability. In this paper, the hardware and principle of the power supply, hardware, software and arithmetic method of the control system are presented.展开更多
基金supported by the MSIP (Ministry of Science,ICT and Future Planning),Korea,under the ITRC (Information Technology Research Center)support program (IITP-2016-H8501-16-1019) supervised by the IITP (Institute for Information & Communications Technology Promotion) and Inha University Research Grantsupported by the Basic Science Research Program through the National Research Foundation (NRF) of Korea funded by the Ministry of Education (2010-0020163)
文摘Vestibulo-ocular reflex(VOR) is an important biological reflex that controls eye movement to ensure clear vision while the head is in motion.Nowadays,VOR measurement is commonly done with a video head impulse test based on a velocity gain algorithm or a position gain algorithm,in which velocity gain is a VOR calculation on head and eye velocity,whereas position gain is calculated from head and eye position.The aim of this work is first to compare the two algorithms' performance and to detect covert catch-up saccade,then to propose a stand-alone recommendation application for the patient's diagnosis.In the first experiment,for ipsilesional and contralesional sides,the calculated position gain(0.94±0.17) is higher than velocity gain(0.84±0.19).Moreover,gain asymmetry of both lesion and intact sides using velocity gain is mostly higher than that from using position gain(four out of five subjects).Consequently,for subjects who have unilateral vestibular neuritis diagnosed from clinical symptoms and a vestibular function test,vestibular weakness is depicted by velocity gain much better than by position gain.Covert catch-up saccade and position gain then are used as inputs for recommendation applications.
文摘This paper presents the control ofa WECS （wind energy conversion system）, equipped with a DFIG （doubly fed induction generator）, for maximum power generation and power quality improvement simultaneously. The proposed control algorithm is applied to a DFIG whose stator is directly connected to the grid and the rotor is connected to the grid through a back-to-back AC-DC-AC PWM （pulse width modulation） converter. The RSC （rotor side converter） is controlled in such a way to extract a maximum power, for a wide range of wind speed. The GSC （grid side converter） is controlled in order to filter harmonic currents of a nonlinear load coupled at the PCC （point of common coupling） and ensure smooth DC bus voltage. Simulation results show that the wind turbine can operate at its optimum energy for a wide range of wind speed and power quality improvement is achieved.
文摘In order to satisfy the requirement of ECRH for power supply, pulse high voltage （ HV ） power supply has been developed. The main parameters of the power are： output voltage -55 kV, output current 25 -2 A, stability ±0.5%, pulse duration 1 s, the leading edge and lagging edge of the pulse is about 40 μs and so on. On the other hand, the system should have preferable protective capability. In this paper, the hardware and principle of the power supply, hardware, software and arithmetic method of the control system are presented.
