Femtosecond pulsed lasers have been widely used over the past decades due to their capability to fabricate precise patterns at the micro-and nano-lengths scales. A key issue for efficient material processing is the de...Femtosecond pulsed lasers have been widely used over the past decades due to their capability to fabricate precise patterns at the micro-and nano-lengths scales. A key issue for efficient material processing is the determination of the laser parameters used in the experimental set ups. Despite a systematic investigation that has been performed to highlight the impact of every parameter independently, little attention has been drawn on the role of the substrate material on which the irradiated solid is placed. In this work, the influence of the substrate is emphasised for films of various thicknesses, which demonstrates that both the optical and thermophysical properties of the substrate affect the thermal fingerprint on the irradiated film while the impact is manifested to be higher at smaller film sizes. Two representative materials, silicon and fused silica, have been selected as typical substrates for thin films(gold and nickel) of different optical and thermophysical behaviour and the thermal response and damage thresholds are evaluated for the irradiated solids. The pronounced influence of the substrate is aimed to pave the way for new and more optimised designs of laserbased fabrication set ups and processing schemes.展开更多
Dynamic processes of CO2 are experimentally studied in intense femtosecond laser fields with laser intensity varying from 1×10^13 W/cm^2 to 6×10^14 W/cm^2. When the laser intensity is below the ionization th...Dynamic processes of CO2 are experimentally studied in intense femtosecond laser fields with laser intensity varying from 1×10^13 W/cm^2 to 6×10^14 W/cm^2. When the laser intensity is below the ionization threshold, a coherent rotational wave-packet is formed for CO2 at room temperature through nonadiabatic rotational excitation. The evolution of the wave-packet leads to transient alignment. The field-free alignment revives periodically after the laser pulse is over. The revival structure can be modified by a second laser pulse for the rotational wave-packet through precisely adjusting the time delays between the two laser pulses. When the laser intensity excesses the ionization threshold, ionization and Coulomb explosion occur. The atomic ions C^m＋ （re=1-3） and On＋ （n=1-3） observed in the experiment exhibit highly anisotropic angular distributions relative to the laser polarization. Using two linearly polarized laser pulses with crossed polarization, we conclude that the anisotropic angular distribution results from dynamic alignment, in which the rising edge of the laser pulse aligns the neutral CO2 along the laser polarization direction prior to ionization.展开更多
基金Projects(862016(Bio Combs4Nanofibres)HELLAS-CH+1 种基金MIS 5002735) funded by the Operational Programme “Competitiveness, Entrepreneurship and Innovation” and co-financed by Greece and the EU (European Regional Development Fund)Project (COST Action TUMIEE) supported by COST-European Cooperation in Science and Technology。
文摘Femtosecond pulsed lasers have been widely used over the past decades due to their capability to fabricate precise patterns at the micro-and nano-lengths scales. A key issue for efficient material processing is the determination of the laser parameters used in the experimental set ups. Despite a systematic investigation that has been performed to highlight the impact of every parameter independently, little attention has been drawn on the role of the substrate material on which the irradiated solid is placed. In this work, the influence of the substrate is emphasised for films of various thicknesses, which demonstrates that both the optical and thermophysical properties of the substrate affect the thermal fingerprint on the irradiated film while the impact is manifested to be higher at smaller film sizes. Two representative materials, silicon and fused silica, have been selected as typical substrates for thin films(gold and nickel) of different optical and thermophysical behaviour and the thermal response and damage thresholds are evaluated for the irradiated solids. The pronounced influence of the substrate is aimed to pave the way for new and more optimised designs of laserbased fabrication set ups and processing schemes.
基金V. ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.20603001, No.10534010, and No.10821062） and the National Basic Research Program of China （No.2006CB806007）.
文摘Dynamic processes of CO2 are experimentally studied in intense femtosecond laser fields with laser intensity varying from 1×10^13 W/cm^2 to 6×10^14 W/cm^2. When the laser intensity is below the ionization threshold, a coherent rotational wave-packet is formed for CO2 at room temperature through nonadiabatic rotational excitation. The evolution of the wave-packet leads to transient alignment. The field-free alignment revives periodically after the laser pulse is over. The revival structure can be modified by a second laser pulse for the rotational wave-packet through precisely adjusting the time delays between the two laser pulses. When the laser intensity excesses the ionization threshold, ionization and Coulomb explosion occur. The atomic ions C^m＋ （re=1-3） and On＋ （n=1-3） observed in the experiment exhibit highly anisotropic angular distributions relative to the laser polarization. Using two linearly polarized laser pulses with crossed polarization, we conclude that the anisotropic angular distribution results from dynamic alignment, in which the rising edge of the laser pulse aligns the neutral CO2 along the laser polarization direction prior to ionization.
