期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
电弧炉冶炼脱碳量对钢质量的影响 被引量:1
1
作者 陈明香 《湖南冶金》 1998年第3期34-37,共4页
在涟钢60t电弧炉(偏心护底出钢)→70tLF钢包精炼炉→4—4R6连铸机工艺线上,进行了2组电弧炉冶炼不同脱碳量的对比试验,比较了不同粗炼脱碳量下钢中气体、夹杂含量、钢坯质量和钢材力学性能.结果表明,脱碳量大,钢质好,并据此确... 在涟钢60t电弧炉(偏心护底出钢)→70tLF钢包精炼炉→4—4R6连铸机工艺线上,进行了2组电弧炉冶炼不同脱碳量的对比试验,比较了不同粗炼脱碳量下钢中气体、夹杂含量、钢坯质量和钢材力学性能.结果表明,脱碳量大,钢质好,并据此确定了电弧炉粗炼的脱碳量范围. 展开更多
关键词 电弧炉 粗炼脱碳量 炼钢
下载PDF
电炉脱碳量对螺纹钢性能影响的试验研究
2
作者 陈明香 《湖南冶金》 1993年第6期4-8,共5页
在60t电弧炉上进行了3种不同脱碳冶炼20Mnsi钢的工艺试验,并轧制成螺纹钢。对试验钢材中气体、金相夹杂和机械性能进行了综合比较,得出了一种经济、可靠的冶炼螺纹钢的脱碳量范围。
关键词 电炉 脱碳量 螺纹钢 性能 熔炼
下载PDF
取向硅钢常化脱碳的工艺研究 被引量:1
3
作者 田文洲 王若平 方泽民 《武汉工程职业技术学院学报》 2010年第1期9-10,13,共3页
利用常化预脱碳一次冷轧法实验生产出0.23mm HIB,侧重研究热轧板经平整压下后,不同的常化时预脱碳工艺对预脱碳量的影响。讨论了采用常化脱碳工艺获得的热轧板组织与常规0.23mm HIB常化组织的差别。
关键词 取向硅钢 常化脱碳 脱碳量 平整压下 初次晶粒
下载PDF
30Cr2Ni4MoV转子钢冶炼过程中N含量的控制
4
作者 黄飞 《大型铸锻件》 2018年第4期1-4,9,共5页
对钢液增氮、脱氮的热力学反应式以及EBT→LF流程生产30Cr2Ni4MoV钢过程中N的变化进行了分析。结果表明:电炉的脱碳量对钢液的脱氮率有重要影响;精炼炉的增氮主要发生在合金化环节,真空脱气对钢液的脱氮效果明显。
关键词 30CR2NI4MOV钢 增氮 脱氮 脱碳量 真空脱气
下载PDF
Indoor Air Quality and Thermal Comfort Evaluation in Latvian Daycare Centers with Carbon Dioxide, Temperature and Humidity as Indicators
5
作者 Galina Stankevica Arturs Lesinskis 《Journal of Civil Engineering and Architecture》 2012年第5期633-638,共6页
Latvian children under the age of 7 can spend up to 60 hours per week in daycare centers and therefore it is very important to establish a healthy and comfortable daycare environment that children will find pleasant a... Latvian children under the age of 7 can spend up to 60 hours per week in daycare centers and therefore it is very important to establish a healthy and comfortable daycare environment that children will find pleasant and stimulating to stay in. This study investigates indoor air quality and thermal comfort within six daycare centers (old, renovated and new-built) in moderate climate zone of Latvia. Measurements of carbon dioxide, air temperature and relative humidity were carried out, and data regarding daycare center characteristics and maintenance activities was collected via combination of field visits, record analysis and interviews. It was found that carbon dioxide concentrations exceeded 1000 ppm in 75% of daycare centers studied, with the highest (1356 ppm) measured in a renovated facility with the natural ventilation system. Thus installation of more efficient ventilation system (mechanical) is recommended to provide acceptable indoor air quality, since opening of windows itself cannot provide the optimal conditions indoors. In all facilities the temperature was kept above 20℃ and the average relative humidity was 40±35%, creating comfortable thermal environment for children. 展开更多
关键词 Daycare center indoor air quality thermal comfort.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部