浅析压力容器中衬里设备的腐化及防护

想办法使得压力的器皿自身的材质的防腐性,这个是现在我们在这方面的一些事情要进行下去的根本而且是关键的部分,文章重点是要叙述下压力器皿会遇到的腐化都有哪些,然后也简单说了腐化会带来的一些损坏,对分压力器皿形成腐化的重点因素,而且还给到一些阻碍腐化并维护压力器皿可以进行运作的可行性的意见,期待着能够在我们的后面的压力的器皿腐化的阻碍以及完整性做出借鉴。

Corrosion behavior of thermal sprayed WC cermet coatings containing metallic binders in saline environment

A series of electrochemical and long-term corrosion tests were carried out in a neutral saline （5%NaCl） vapor of 35 °C on thermal sprayed WC cermet coatings containing different kinds of metallic binders in order to examine the effect of composition of binder materials on the corrosion behavior. The experimental results revealed that the overall corrosion resistance of WC-Co coating was inferior to that of WC-Co-Cr coating. For the coatings without Cr, WC-Co, general corrosion occurred in binder materials in addition to galvanic corrosion between WC particles and metallic binders in the neutral environment. By contrast, the formation of passive film in the form of surface oxide in the coatings containing Cr, WC-Co-Cr, suppressed the binder and metallic binders to be eroded. It is found that the chemical composition of metallic binder materials is one of the important factors influencing the corrosion resistance of HVOF sprayed WC cermet coatings in the neutral vapor.

Corrosion resistance improvement of Ti-6Al-4V alloy by anodization in the presence of inhibitor ions

Colorful thin oxide films were synthesized by galvanostatic anodization on Ti−6Al−4V alloy.Three different aqueous solutions containing corrosion inorganic inhibitors(Na_(2)MoO_(4),NaH_(2)PO_(4) and NH4VO3)were employed for the anodization treatment.The effect of inhibitor anions on the corrosion behavior of the alloy in Ringer solution was studied.Open circuit potential(OCP),Tafel polarization,linear sweep voltammetry(LSV)and chronoamperometry(CA)were performed to evaluate the corrosion performance of the treated electrodes.The incorporation of the inhibitor ions was detected by the release of Mo,V and P through ICP-AES technique.The formed oxides were characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).The results show that compact,amorphous oxides without pores or cracks were obtained independently of the solution used.The sample anodized in Na_(2)MoO_(4) solution registered the lowest corrosion current density(0.11μA/cm^(2)),and it was able to protect the alloy even after 168 h of immersion in Ringer solution.No cracks or corrosion products were detected.The XPS analysis reveals the incorporation of molybdenum to the oxide film in the form of Mo^(6+) and Mo^(4+).

Corrosion leaking of preheater weldment in alumina factories

Stress corrosion cracking (SCC) and anticorrosion measures of TU42C weld-joint were studied by constant load experiments and pickling experiments. The results show that in 40%(mass fraction) NaOH solution at 110℃, caustic SCC occurs in TU42C weld-joints at the applied potential of-1020mV(vs SCE) for 3d while at the potential of-950mV(vs SCE) for 10d. All the cracks are intergranular. In the 10% sulfuric acid, the cracks have the most negative self-corrosion potential-432.5mV(vs SCE) and are active to be further corroded by the acid. Because of the same corrosion behaviour as the lab weldment, preheater’s cracking in alumina factories is attributed to the combining actions of previous caustic SCC in Bayer solutions and continuous acid corrosion by pickling with the addition of RD. The following measures are effective to prevent the corrosion failure of preheater, such as postweld heat treatment at 620℃ to relax the residual weld stress, addition of CC3 and L826 as the corrosion inhibitors to improve the pickling and cleaning by the high pressure water instead of by pickling.

Electrochemical Polymerization of Acrylamide Film on Mild Steel Electrode for Corrosion Protection

Polyacrylamide （PAM） film was electrosynthesized on mild steel by cyclic voltammetry using Ce （IV） salt-oxalic acid as supporting electrolyte. Polymerization was initiated by a free radical that was formed by the fast reaction of oxalic acid and Ce （IV）. The electrolysis of the reaction solution resulted in regeneration of Ce （IV）, which could oxidize oxalic acid to produce radicals. The effect of temperature on the yield of electroinitiated polymerization was performed. The potential sweep rates were changed to achieve the polymer film with different thickness. Protective properties of the PAM film for corrosion of mild steel in 1 M NaCI aqueous solution were investigated by potentiodynamic polarization curves and electrochemical impedance spectroscopy （EIS）. The structure of PAM film on mild steel was investigated by using physicochemical methods such as elemental analysis of C, H, N, physical chemical methods and FTIR spectrometer. The influence of scan repetition and scan rate on the formation of polymer film was studied at a current density of 1 mA/cm2. The results of these studies reveal that the corrosion resistance of the PAM-coated mild steel was significantly higher and the corrosion rate was considerably lower than that of uncoated steel. The PAM film was formed with lower sweep rate leading to more positive shift of corrosion potential and greater charge transfer resistance, reflecting higher inhibition for corrosion of the mild steel.

Significantly enhanced photoelectrochemical cathodic protection performance and preventing biofouling dual functional Cu_(2)ZnSnS_(4)/TiO_(2)nanotube composite material

A new type of photoelectrochemical cathodic protection technology(a combination of seawater corrosion and biological fouling resistance)is being actively researched to alleviate the serious corrosion of marine metal materials.At present,there is almost no research on anti-corrosion and anti-fouling dual functional materials.In this paper,Cu_(2)ZnSnS_(4)is attached to the surface of TiO,nanotubes through a one-step hydrothermal method for modification.The results indicate that when the hydrothermal reaction time is 24 h,Cu_(2)ZnSnS_(4)/TiO_(2)nanocomposite material exhibits excellent performance in coupling with the protected 304 SS,with its open circuit potential shifts negatively to-1.04 V.This material improves the separation efficiency of photogenerated electrons and effectively improves the photochemical cathodic protection of 304 stainless steel.The high removal rate of Staphylococcus aureus(up to 93%)of the as-prepared samples also proved that it has the effect of the anti-biological fouling.