The Al-3.40Mg-1.08Sc alloy plates were manufactured by selective laser melting(SLM) at platform temperatures of 35 ℃ and 200 ℃, respectively, and the corrosion performance of them was studied along height direction....The Al-3.40Mg-1.08Sc alloy plates were manufactured by selective laser melting(SLM) at platform temperatures of 35 ℃ and 200 ℃, respectively, and the corrosion performance of them was studied along height direction. The results show that the corrosion resistance of the alloy plate built at platform temperature of 35 ℃ along height direction is basically the same due to a uniform microstructure;While the corrosion resistance of the alloy plate built at platform temperature of 200 ℃ along height direction is different. The evolution of microstructure and the distribution of secondary phases are investigated, and the results show that the Cu-rich phases in alloy play a key role on corrosion performance. At higher platform temperature, the cooling rate is relative slow and a certain degree of in situ ageing leads to the significantly different distribution of Cu-rich phases along grain boundary. Specimens built at the platform temperature of 200 ℃ are inclined to locate at the crossed grain boundary, rather than continuous segregation of Cu-rich phases along grain boundary that is built at platform temperature of 35 ℃. Therefore, the corrosion resistance of Al-3.40Mg-1.08Sc alloy plate manufactured at platform temperature of 200 ℃ is higher, and presents a gradually decreasing trend along height direction.展开更多
The effect of temperature on the corrosion behavior of copper in simulated high-level nuclear waste environment wassystematically studied.Electrochemical methods,including electrochemical impendence spectra,Mott–Scho...The effect of temperature on the corrosion behavior of copper in simulated high-level nuclear waste environment wassystematically studied.Electrochemical methods,including electrochemical impendence spectra,Mott–Schottky technology,cyclicpolarization,and potentiostatic polarization,were employed to characterize the corrosion behavior of copper at different temperatures.Stereoscopic microscopy and scanning electron microscopy were used to examine the surface morphology,and X-ray photoelectronspectroscopy analysis was used to identify the composition of the passive film.The experimental results show that corrosionresistance of the passive film does not blindly decrease with the increase of temperature but increases at60°C owing to a compactouter layer;there is a potential for pitting corrosion,which decreases as the temperature increases.The main product of copper in ananaerobic aqueous sulfide solution is Cu2S but the content of CuS increases at higher temperatures.The whole passivation rangeshows p-type semiconductor characteristics and the magnitude of the acceptor density is1023cm-3,which increases with increasingtemperature.展开更多
基金Project(51901207) supported by the National Natural Science Foundation of ChinaProject(2018M632796) supported by the China Postdoctoral Science FoundationProjects(19A430024, 21A430037) supported by the Plan of Henan Key Scientific Research Project of Universities,China。
文摘The Al-3.40Mg-1.08Sc alloy plates were manufactured by selective laser melting(SLM) at platform temperatures of 35 ℃ and 200 ℃, respectively, and the corrosion performance of them was studied along height direction. The results show that the corrosion resistance of the alloy plate built at platform temperature of 35 ℃ along height direction is basically the same due to a uniform microstructure;While the corrosion resistance of the alloy plate built at platform temperature of 200 ℃ along height direction is different. The evolution of microstructure and the distribution of secondary phases are investigated, and the results show that the Cu-rich phases in alloy play a key role on corrosion performance. At higher platform temperature, the cooling rate is relative slow and a certain degree of in situ ageing leads to the significantly different distribution of Cu-rich phases along grain boundary. Specimens built at the platform temperature of 200 ℃ are inclined to locate at the crossed grain boundary, rather than continuous segregation of Cu-rich phases along grain boundary that is built at platform temperature of 35 ℃. Therefore, the corrosion resistance of Al-3.40Mg-1.08Sc alloy plate manufactured at platform temperature of 200 ℃ is higher, and presents a gradually decreasing trend along height direction.
基金Project(FRF-TP-14-011C1) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2014CB643300) supported by the National Basic Research Program of China
文摘The effect of temperature on the corrosion behavior of copper in simulated high-level nuclear waste environment wassystematically studied.Electrochemical methods,including electrochemical impendence spectra,Mott–Schottky technology,cyclicpolarization,and potentiostatic polarization,were employed to characterize the corrosion behavior of copper at different temperatures.Stereoscopic microscopy and scanning electron microscopy were used to examine the surface morphology,and X-ray photoelectronspectroscopy analysis was used to identify the composition of the passive film.The experimental results show that corrosionresistance of the passive film does not blindly decrease with the increase of temperature but increases at60°C owing to a compactouter layer;there is a potential for pitting corrosion,which decreases as the temperature increases.The main product of copper in ananaerobic aqueous sulfide solution is Cu2S but the content of CuS increases at higher temperatures.The whole passivation rangeshows p-type semiconductor characteristics and the magnitude of the acceptor density is1023cm-3,which increases with increasingtemperature.
