目的探讨术中诱发肌电图监测在腰椎椎弓根钉植入术中的监测作用。方法接受神经电生理监测患者共35例,患者均给予腰椎椎弓根螺钉内固定术治疗,于手术过程中进行电刺激诱发的肌电图监测。共监测神经根116根,将术中神经根监测为阳性结果以...目的探讨术中诱发肌电图监测在腰椎椎弓根钉植入术中的监测作用。方法接受神经电生理监测患者共35例,患者均给予腰椎椎弓根螺钉内固定术治疗,于手术过程中进行电刺激诱发的肌电图监测。共监测神经根116根,将术中神经根监测为阳性结果以与阴性结果进行统计分析,并评价该监测方法的有效性。结果患者在减压手术中未见异常肌电,2例患者在植入椎弓根钉后到手术完成间断产生自发性肌电活动,但与手术操作行为无关联,术后观察亦未见其他神经症状。对测116根神经根行电刺激肌电图监中,36枚螺钉(31.03%)在开路锥置入的过程中至少产生一次有意义的肌电活动。刺激电流在10 m A以下时共有4枚引出了肌电活动。取出攻丝调整方向重新攻入后,2例刺激电流在15 m A以上未诱发出肌电反应,2例在12 m A诱发出肌电图。其余无异常肌电反应,术后亦均未出现新的神经症状。本研究的116个螺钉,出现阳性4例,阳性率3.45%。监测灵敏度100%,特异度97.39%。术后行CT检查发现监测阳性改道的患者椎弓根的内侧壁部分破损。所有患者均未见新发的神经症状。结论腰椎椎弓根螺钉内固定术中进行自发和持续诱发肌电图监测能及时发现螺钉位置的异常,避免神经损伤的发生,是监测神经根功能的有效手段之一。展开更多
Objective To evaluate the different influences of anterior and posterior correction and fusion approaches upon disc wedging in adolescent idiopathic thoracolumbar/lumbar scoliosis.Methods The retrospective study was c...Objective To evaluate the different influences of anterior and posterior correction and fusion approaches upon disc wedging in adolescent idiopathic thoracolumbar/lumbar scoliosis.Methods The retrospective study was conducted with the medical records and radiographs of adolescent idiopathic thoracolumbar/lumbar scoliosis patients that underwent anterior(group A) or posterior(group B) correction and fusion surgery from December 1998 to May 2008.The correction of the main curve and changes of the disc wedging were analyzed.Results Fifty-three patients were included,26 in group A and 27 in group B.The mean coronal Cobb angles of the main curve in group A and group B were significantly corrected after surgery(P<0.05),with an average correction rate of 75.2% and 88.2%,respectively.Upon final follow-up,the coronal Cobb angles of the two groups were 18.9°±11.1° and 7.7°±5.6°,respectively,with an average correction loss of 6.8°±6.5° and 2.7°±3.3°,respectively.The coronal Cobb angle after operation and at final follow-up,and the correction rate were significantly better in group B than those in group A(P<0.05),while the coronal Cobb angle loss in group A was greater than that in group B(P<0.05).The disc wedging before operation,after operation,and at final follow-up were 3.2°±3.0°,5.7°±3.0°,and 8.6°±4.4° in group A,and 2.4°±3.2°,3.3°±3.4°,and 3.7°±3.6° in group B,respectively.Postoperative disc wedging was significantly larger compared with preoperative measurements in group A(P<0.05),but not in group B(P>0.05).The difference between disc wedging at final follow-up and that after surgery was significant in group A(P<0.05),but not in group B(P>0.05).Between the two groups,group A had larger disc angles after operation and at final follow-up(P<0.05),and a greater loss of disc angle(P<0.05).Conclusion For adolescent idiopathic thoracolumbar/lumbar scoliosis,posterior approach using all pedicle screws might produce a better result in terms of disc wedging compared with anterior approach.展开更多
Objective： To prospectively evaluate the feasibility, safety and efficacy of the percutaneous pedicle screw fixation through the pedicle of fractured vertebra in the treatment of type A thoracolumbar fractures using ...Objective： To prospectively evaluate the feasibility, safety and efficacy of the percutaneous pedicle screw fixation through the pedicle of fractured vertebra in the treatment of type A thoracolumbar fractures using Sextant system in the retrospective non-randomized case-control study. Methods： Atotal of 38 consecutive non-randomized patients with type A thoracolumbar fractures, which had been stabilized posteriorly from December 2006 to March 2009, were examined retrospectively more than 9 months after surgery. Twenty-one patients had been treated conventionally with open pedicle screw fixation （OPSF） and 17 patients received minimally invasive treatment with Sextant percutaneous pedicle screw fixation （SPPSF）. As a method of evaluation, the incision size, the intraoperation and post- operative volume of blood loss, operation time, postoperative hospital stay, blood transfusion, the radiological assessment of the sagittal Cobb＇s angle, vertebral body angle and vertebral body height were recorded and compared. Results： All patients were followed up for 8-24 months （average 11.6 months）. There were significant differences in the incision size, surgical blood loss, surgical draining Joss, operation time, hospital stay after operation, blood transfusion, the proportion of antalgic supplement and postoperative incisional VAS between the two groups （P〈0.05）. Mean preoperative kyphotic deformity was 16.0° and improved by 9.3° after surgery in OPSF group, but 15.2° and 10.3° respectively in SPPSF group. Mean preoperative angle of the fractured vertebral body was 15.9°and improved by 7.9° after surgery in OPSF group, but 14.9° and 6.6° respectively in SPPSF group. Mean anterior vertebral body height （% of normal） was 67.3% before surgery and 95.8% after surgery, but 69.1% and 90.1% respectively in SPPSF group. Mean posterior vertebral body height （% of normal） was 93.3% before surgery and 99.5% after surgery, but 88.9% and 93.3% respectively in SPPSF group. Among the patients whose 9-month follow-up films were available, 3.0° ofkyphosis correction was lost in OPSF group, but 3.2° in SPPSF group. And 1.0°of the angle of the fractured vertebral body correction was lost in OPSF group, but 1.5°in SPPSF group. Then 3.0% of the anterior vertebral body height correction was lost in OPSF group, but 2.2% in SPPSF group. And 3.0% of the posterior vertebral body height correction was lost in OPSF group, but 2.5% in SPPSF group. The sagittal Cobb＇s angle, vertebral body angle and anterior height of the fractured vertebra were all significantly different in each group before and after operation （P〈0.05）. There were no significant differences in the postoperative sagittal Cobb＇s angle, vertebral body angle and the improvement of the vertebral body height and the kyphotic deformity correction between OPSF and SPPSF groups （P〉0.05）, but there was significant difference in the postoperative anterior height of the fractured vertebra between the two groups （P〈0.05）. Conclusion： The percutaneous pedicle screw fixation through the pedicle of fractured vertebra using Sextant system is a good minimally-invasive surgical therapeutic choice for patients with type A thoracolumbar fracture except for that the SPPSF has a little insufficiency in resuming the anterior height of the fractured vertebra compared with OPSF.展开更多
Objective： To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods： A 3D reconstruc...Objective： To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods： A 3D reconstruction model for the desired lumbar vertebra was generated by using the Mimics 10.11 software, and the optimal screw size and orientation were determined using the reverse engineering software. Afterwards, a drill template was created by reverse engineering principle, whose surface was the antitemplate of the vertebral surface. The drill template and its corresponding vertebra were manufactured using the rapid prototyping technique. Results： The accuracy of the drill template was confinned by drilling screw trajectory into the vertebral biomodel preoperatively. This method also showed its ability to customize the placement and size of each screw based on the unique morphology of the lumbar vertebra.The drill template fits the postural surface of the vertebra very well in the cadaver experiment. Postoperative CT scans for controlling the pedicle bore showed that the personalized template had a high precision in cadaver experiment and clinical application. No misplacement occurred by using the personalized template. During surgery, no additional computer assistance was needed. Conclusions： The authors have developed a novel drill template for lumbar pedicle screw placement with good applicability and high accuracy. The potential use of drill templates to place lumbar pedicle screws is promising, Our methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the lumbar spine.展开更多
文摘目的探讨术中诱发肌电图监测在腰椎椎弓根钉植入术中的监测作用。方法接受神经电生理监测患者共35例,患者均给予腰椎椎弓根螺钉内固定术治疗,于手术过程中进行电刺激诱发的肌电图监测。共监测神经根116根,将术中神经根监测为阳性结果以与阴性结果进行统计分析,并评价该监测方法的有效性。结果患者在减压手术中未见异常肌电,2例患者在植入椎弓根钉后到手术完成间断产生自发性肌电活动,但与手术操作行为无关联,术后观察亦未见其他神经症状。对测116根神经根行电刺激肌电图监中,36枚螺钉(31.03%)在开路锥置入的过程中至少产生一次有意义的肌电活动。刺激电流在10 m A以下时共有4枚引出了肌电活动。取出攻丝调整方向重新攻入后,2例刺激电流在15 m A以上未诱发出肌电反应,2例在12 m A诱发出肌电图。其余无异常肌电反应,术后亦均未出现新的神经症状。本研究的116个螺钉,出现阳性4例,阳性率3.45%。监测灵敏度100%,特异度97.39%。术后行CT检查发现监测阳性改道的患者椎弓根的内侧壁部分破损。所有患者均未见新发的神经症状。结论腰椎椎弓根螺钉内固定术中进行自发和持续诱发肌电图监测能及时发现螺钉位置的异常,避免神经损伤的发生,是监测神经根功能的有效手段之一。
文摘Objective To evaluate the different influences of anterior and posterior correction and fusion approaches upon disc wedging in adolescent idiopathic thoracolumbar/lumbar scoliosis.Methods The retrospective study was conducted with the medical records and radiographs of adolescent idiopathic thoracolumbar/lumbar scoliosis patients that underwent anterior(group A) or posterior(group B) correction and fusion surgery from December 1998 to May 2008.The correction of the main curve and changes of the disc wedging were analyzed.Results Fifty-three patients were included,26 in group A and 27 in group B.The mean coronal Cobb angles of the main curve in group A and group B were significantly corrected after surgery(P<0.05),with an average correction rate of 75.2% and 88.2%,respectively.Upon final follow-up,the coronal Cobb angles of the two groups were 18.9°±11.1° and 7.7°±5.6°,respectively,with an average correction loss of 6.8°±6.5° and 2.7°±3.3°,respectively.The coronal Cobb angle after operation and at final follow-up,and the correction rate were significantly better in group B than those in group A(P<0.05),while the coronal Cobb angle loss in group A was greater than that in group B(P<0.05).The disc wedging before operation,after operation,and at final follow-up were 3.2°±3.0°,5.7°±3.0°,and 8.6°±4.4° in group A,and 2.4°±3.2°,3.3°±3.4°,and 3.7°±3.6° in group B,respectively.Postoperative disc wedging was significantly larger compared with preoperative measurements in group A(P<0.05),but not in group B(P>0.05).The difference between disc wedging at final follow-up and that after surgery was significant in group A(P<0.05),but not in group B(P>0.05).Between the two groups,group A had larger disc angles after operation and at final follow-up(P<0.05),and a greater loss of disc angle(P<0.05).Conclusion For adolescent idiopathic thoracolumbar/lumbar scoliosis,posterior approach using all pedicle screws might produce a better result in terms of disc wedging compared with anterior approach.
文摘Objective： To prospectively evaluate the feasibility, safety and efficacy of the percutaneous pedicle screw fixation through the pedicle of fractured vertebra in the treatment of type A thoracolumbar fractures using Sextant system in the retrospective non-randomized case-control study. Methods： Atotal of 38 consecutive non-randomized patients with type A thoracolumbar fractures, which had been stabilized posteriorly from December 2006 to March 2009, were examined retrospectively more than 9 months after surgery. Twenty-one patients had been treated conventionally with open pedicle screw fixation （OPSF） and 17 patients received minimally invasive treatment with Sextant percutaneous pedicle screw fixation （SPPSF）. As a method of evaluation, the incision size, the intraoperation and post- operative volume of blood loss, operation time, postoperative hospital stay, blood transfusion, the radiological assessment of the sagittal Cobb＇s angle, vertebral body angle and vertebral body height were recorded and compared. Results： All patients were followed up for 8-24 months （average 11.6 months）. There were significant differences in the incision size, surgical blood loss, surgical draining Joss, operation time, hospital stay after operation, blood transfusion, the proportion of antalgic supplement and postoperative incisional VAS between the two groups （P〈0.05）. Mean preoperative kyphotic deformity was 16.0° and improved by 9.3° after surgery in OPSF group, but 15.2° and 10.3° respectively in SPPSF group. Mean preoperative angle of the fractured vertebral body was 15.9°and improved by 7.9° after surgery in OPSF group, but 14.9° and 6.6° respectively in SPPSF group. Mean anterior vertebral body height （% of normal） was 67.3% before surgery and 95.8% after surgery, but 69.1% and 90.1% respectively in SPPSF group. Mean posterior vertebral body height （% of normal） was 93.3% before surgery and 99.5% after surgery, but 88.9% and 93.3% respectively in SPPSF group. Among the patients whose 9-month follow-up films were available, 3.0° ofkyphosis correction was lost in OPSF group, but 3.2° in SPPSF group. And 1.0°of the angle of the fractured vertebral body correction was lost in OPSF group, but 1.5°in SPPSF group. Then 3.0% of the anterior vertebral body height correction was lost in OPSF group, but 2.2% in SPPSF group. And 3.0% of the posterior vertebral body height correction was lost in OPSF group, but 2.5% in SPPSF group. The sagittal Cobb＇s angle, vertebral body angle and anterior height of the fractured vertebra were all significantly different in each group before and after operation （P〈0.05）. There were no significant differences in the postoperative sagittal Cobb＇s angle, vertebral body angle and the improvement of the vertebral body height and the kyphotic deformity correction between OPSF and SPPSF groups （P〉0.05）, but there was significant difference in the postoperative anterior height of the fractured vertebra between the two groups （P〈0.05）. Conclusion： The percutaneous pedicle screw fixation through the pedicle of fractured vertebra using Sextant system is a good minimally-invasive surgical therapeutic choice for patients with type A thoracolumbar fracture except for that the SPPSF has a little insufficiency in resuming the anterior height of the fractured vertebra compared with OPSF.
基金This project was supported by China Postdoctoral Science Foundation （20080431420） and Yunnan Natural Science Foundation （2008CD210）.
文摘Objective： To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods： A 3D reconstruction model for the desired lumbar vertebra was generated by using the Mimics 10.11 software, and the optimal screw size and orientation were determined using the reverse engineering software. Afterwards, a drill template was created by reverse engineering principle, whose surface was the antitemplate of the vertebral surface. The drill template and its corresponding vertebra were manufactured using the rapid prototyping technique. Results： The accuracy of the drill template was confinned by drilling screw trajectory into the vertebral biomodel preoperatively. This method also showed its ability to customize the placement and size of each screw based on the unique morphology of the lumbar vertebra.The drill template fits the postural surface of the vertebra very well in the cadaver experiment. Postoperative CT scans for controlling the pedicle bore showed that the personalized template had a high precision in cadaver experiment and clinical application. No misplacement occurred by using the personalized template. During surgery, no additional computer assistance was needed. Conclusions： The authors have developed a novel drill template for lumbar pedicle screw placement with good applicability and high accuracy. The potential use of drill templates to place lumbar pedicle screws is promising, Our methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the lumbar spine.
