A multifunctional polymeric nanofilm of triazinedithiolsilane monosodium salt, which can resist corrosion and activatecopper surface concurrently, was prepared by galvanostatic technique and the following hydrolysis-c...A multifunctional polymeric nanofilm of triazinedithiolsilane monosodium salt, which can resist corrosion and activatecopper surface concurrently, was prepared by galvanostatic technique and the following hydrolysis-condensation approach.Electrochemical tests were carried out to evaluate the resistant ability of nanofilm. The changes of functional groups atop thenanofilms were monitored with Fourier transform infrared spectroscopy （FT-IR） and contact angles （CA） simultaneously. Thechemical composition and the morphology of the polymeric nanofilm were investigated by X-ray photoelectron spectroscopy （XPS）and scanning electron microscope （SEM）, respectively. The results reveal that the preferentially developed disulfide units protect thecopper during the whole preparation process, and the subsequently hydrolyzed nanofilms without/with heating shape into newinterface phases bearing the multifunctionality. This multifunctional interface （the polymeric nanofilm on copper surface） opens upthe possibilities for other OH-containing reagents to be anchored onto copper surface in demanding researches or industrialapplications.展开更多
Affinity membranes are fabricated for boric acid removal by the surface functionalization of microporous polypropylene membrane(MPPM)with lactose-based polyols.The affinity is based on specific complexation between bo...Affinity membranes are fabricated for boric acid removal by the surface functionalization of microporous polypropylene membrane(MPPM)with lactose-based polyols.The affinity is based on specific complexation between boric acid and saccharide polyols.A photoinduced grafting-chemical reaction sequence was used to prepare these affinity membranes.Poly(2-aminoethyl methacrylate hydrochloride)[poly(AEMA)]was grafted on the surfaces of MPPM by UV-induced graft polymerization.Grafting in the membrane pores was visualized by dying the cross-section of poly(AEMA)-grafted MPPM with fluorescein disodium and imaging with confocal laser scanning microscopy.It is concluded that lactose ligands can be covalently immobilized on the external surface and in the pores by the subsequent coupling of poly(AEMA)with lactobionic acid(LA).Physical and chemical properties of the affinity membranes were characterized by field emission scanning electron microscopy and Fourier Transform Infrared/Attenuated Total Refraction spectroscopy(FT-IR/ATR).3-Aminophenyl boric acid(3-APBA)was removed from aqueous solution by a single piece of lactose-functionalized MPPM in a dynamic filtration system.The results show that the 3-APBA removal reaches an optimal efficiency(39.5%)under the alkaline condition(pH9.1),which can be improved by increasing the immobilization density of LA.Regeneration of these affinity membranes can be easily realized through acid-base washing because the complexation of boric acid and saccharide polyol is reversible.展开更多
A conductometric sensor sensitive to oxytetracycline hydrochloride （OTC.HCI） was developed on the basis of utilizing OTC.HCl imprinted polymer, synthesized under the optimized conditions by using non-covalent imprin...A conductometric sensor sensitive to oxytetracycline hydrochloride （OTC.HCI） was developed on the basis of utilizing OTC.HCl imprinted polymer, synthesized under the optimized conditions by using non-covalent imprinted technology with OTC.HCl as a template, MAA as a functional monomer, and EGDMA as a cross-linker, which were the composition of the sensing membrane. The responses increased linearly with the increase of OTC.HCl concentration in the range of 0.99-12.0 μM. The response mechanism of the sensor was also discussed.展开更多
Biological light-driven proton pumps which could transfer light energy to electrical energy have aroused intense interest in the past years.Many related researches have been conducted to mimic this process in vitro be...Biological light-driven proton pumps which could transfer light energy to electrical energy have aroused intense interest in the past years.Many related researches have been conducted to mimic this process in vitro because of its potential significant applications.This review describes the progress in biomimetic photoelectric conversion systems based on different kinds of promising artificial membranes.Both biological bacteriorhodopsin and the photosensitive chemical molecules which could be used to achieve the photoelectric conversion function are discussed.Also a short outlook in this field is demonstrated at the end.展开更多
基金Project(2013DFR40700)supported by International S&T Cooperation Program of ChinaProjects(21174034,51003019,51302280)supported by the National Natural Science Foundation of China
文摘A multifunctional polymeric nanofilm of triazinedithiolsilane monosodium salt, which can resist corrosion and activatecopper surface concurrently, was prepared by galvanostatic technique and the following hydrolysis-condensation approach.Electrochemical tests were carried out to evaluate the resistant ability of nanofilm. The changes of functional groups atop thenanofilms were monitored with Fourier transform infrared spectroscopy （FT-IR） and contact angles （CA） simultaneously. Thechemical composition and the morphology of the polymeric nanofilm were investigated by X-ray photoelectron spectroscopy （XPS）and scanning electron microscope （SEM）, respectively. The results reveal that the preferentially developed disulfide units protect thecopper during the whole preparation process, and the subsequently hydrolyzed nanofilms without/with heating shape into newinterface phases bearing the multifunctionality. This multifunctional interface （the polymeric nanofilm on copper surface） opens upthe possibilities for other OH-containing reagents to be anchored onto copper surface in demanding researches or industrialapplications.
基金Supported by the National Natural Science Foundation of China(50933006)the National Basic Research Program of China(2009CB623401)
文摘Affinity membranes are fabricated for boric acid removal by the surface functionalization of microporous polypropylene membrane(MPPM)with lactose-based polyols.The affinity is based on specific complexation between boric acid and saccharide polyols.A photoinduced grafting-chemical reaction sequence was used to prepare these affinity membranes.Poly(2-aminoethyl methacrylate hydrochloride)[poly(AEMA)]was grafted on the surfaces of MPPM by UV-induced graft polymerization.Grafting in the membrane pores was visualized by dying the cross-section of poly(AEMA)-grafted MPPM with fluorescein disodium and imaging with confocal laser scanning microscopy.It is concluded that lactose ligands can be covalently immobilized on the external surface and in the pores by the subsequent coupling of poly(AEMA)with lactobionic acid(LA).Physical and chemical properties of the affinity membranes were characterized by field emission scanning electron microscopy and Fourier Transform Infrared/Attenuated Total Refraction spectroscopy(FT-IR/ATR).3-Aminophenyl boric acid(3-APBA)was removed from aqueous solution by a single piece of lactose-functionalized MPPM in a dynamic filtration system.The results show that the 3-APBA removal reaches an optimal efficiency(39.5%)under the alkaline condition(pH9.1),which can be improved by increasing the immobilization density of LA.Regeneration of these affinity membranes can be easily realized through acid-base washing because the complexation of boric acid and saccharide polyol is reversible.
文摘A conductometric sensor sensitive to oxytetracycline hydrochloride （OTC.HCI） was developed on the basis of utilizing OTC.HCl imprinted polymer, synthesized under the optimized conditions by using non-covalent imprinted technology with OTC.HCl as a template, MAA as a functional monomer, and EGDMA as a cross-linker, which were the composition of the sensing membrane. The responses increased linearly with the increase of OTC.HCl concentration in the range of 0.99-12.0 μM. The response mechanism of the sensor was also discussed.
基金supported by the National Basic Research Program of China (2010CB934700,2009CB930404,2007CB936403,2007CB936400)National Natural Science Foundation of China (20974113,20920102036)
文摘Biological light-driven proton pumps which could transfer light energy to electrical energy have aroused intense interest in the past years.Many related researches have been conducted to mimic this process in vitro because of its potential significant applications.This review describes the progress in biomimetic photoelectric conversion systems based on different kinds of promising artificial membranes.Both biological bacteriorhodopsin and the photosensitive chemical molecules which could be used to achieve the photoelectric conversion function are discussed.Also a short outlook in this field is demonstrated at the end.
