The biosorption of copper(Ⅱ) ions onto biofilm was studied in a batch system with respect to the temperature, initial pH value and biofilm sorbent mass. The biomass exhibited the highest copper(Ⅱ) sorption capacity ...The biosorption of copper(Ⅱ) ions onto biofilm was studied in a batch system with respect to the temperature, initial pH value and biofilm sorbent mass. The biomass exhibited the highest copper(Ⅱ) sorption capacity under the conditions of room temperature, initial pH value of 6.0 and the sorbent mass 8 g. The experimental data were analyzed using four sorption kinetic models, the pseudo-first order, the Ritchie second order, the modified second order and the Elovich equations to determine the best-fit equation for the sorption of metal ions onto biofilm. Comparing with the sum of squared-errors, the results show that both the Ritchie second order and modified second order equations can fit the experimental data very well.展开更多
Membrane fouling is the main problem of membrane bioreactors (MBR), which seriously influ- ences its wastewater treatment effect and running. The characteristics of microbiology and hydrodynamics concerning membrane f...Membrane fouling is the main problem of membrane bioreactors (MBR), which seriously influ- ences its wastewater treatment effect and running. The characteristics of microbiology and hydrodynamics concerning membrane fouling were investigated and the measure was put forward for optimum operation of MBR. The measure is that 1) the parameters of activated sludge concentration (X) and membrane flux should be lower than the critical values of X and membrane flux respectively, and 2) the activated sludge should be discharged periodically. The experimental results show that the combination backwashing of gas and perme- ated effluent is better than single gas backwashing or single permeated effluent backwashing. This technique can remove the cake layer deposited on the membrane surface, decrease the membrane fouling, and recover the membrane flux effectively. So it is effective for prevention of membrane fouling.展开更多
文摘The biosorption of copper(Ⅱ) ions onto biofilm was studied in a batch system with respect to the temperature, initial pH value and biofilm sorbent mass. The biomass exhibited the highest copper(Ⅱ) sorption capacity under the conditions of room temperature, initial pH value of 6.0 and the sorbent mass 8 g. The experimental data were analyzed using four sorption kinetic models, the pseudo-first order, the Ritchie second order, the modified second order and the Elovich equations to determine the best-fit equation for the sorption of metal ions onto biofilm. Comparing with the sum of squared-errors, the results show that both the Ritchie second order and modified second order equations can fit the experimental data very well.
文摘Membrane fouling is the main problem of membrane bioreactors (MBR), which seriously influ- ences its wastewater treatment effect and running. The characteristics of microbiology and hydrodynamics concerning membrane fouling were investigated and the measure was put forward for optimum operation of MBR. The measure is that 1) the parameters of activated sludge concentration (X) and membrane flux should be lower than the critical values of X and membrane flux respectively, and 2) the activated sludge should be discharged periodically. The experimental results show that the combination backwashing of gas and perme- ated effluent is better than single gas backwashing or single permeated effluent backwashing. This technique can remove the cake layer deposited on the membrane surface, decrease the membrane fouling, and recover the membrane flux effectively. So it is effective for prevention of membrane fouling.
