期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
螺环原酸酯类膨胀化合物研究进展
1
作者 刘静 李刚 柳阳 《高分子通报》 CSCD 北大核心 2017年第6期27-31,共5页
膨胀单体的特点是在聚合过程中没有体积收缩,甚至会产生体积膨胀,这种特殊的性能使其具有广阔的应用前景。目前可用作膨胀单体的螺环化合物主要有螺环原碳酸酯(SOC)、螺环原酸酯(SOE)和双环原酸酯(BOE)。螺环原酸酯(SOE)是最早发现能进... 膨胀单体的特点是在聚合过程中没有体积收缩,甚至会产生体积膨胀,这种特殊的性能使其具有广阔的应用前景。目前可用作膨胀单体的螺环化合物主要有螺环原碳酸酯(SOC)、螺环原酸酯(SOE)和双环原酸酯(BOE)。螺环原酸酯(SOE)是最早发现能进行膨胀聚合反应的一类化合物。本文介绍了螺环原酸酯类化合物的发现、合成方法、聚合反应及应用的研究进展,并提出未来的发展前景。 展开更多
关键词 螺环原酸酯 膨胀化合物 聚合反应 应用
原文传递
膨胀石墨的工艺优化及性能研究 被引量:3
2
作者 赵彦亮 刘菲 +2 位作者 谭俊华 朱开金 王文霞 《山西化工》 2012年第6期1-4,共4页
利用混酸法与单酸法制备膨胀石墨,通过XRD、FESEM对2种制备方法进行比较并优化工艺条件,对吸附性能进行表征。实验得出,混酸法制备膨胀石墨的最佳工艺为:原料质量配比m(H2SO4)∶m(HNO3)∶m(石墨)=3∶1∶1,m(石墨)∶m(高锰酸钾)=1.00∶0.... 利用混酸法与单酸法制备膨胀石墨,通过XRD、FESEM对2种制备方法进行比较并优化工艺条件,对吸附性能进行表征。实验得出,混酸法制备膨胀石墨的最佳工艺为:原料质量配比m(H2SO4)∶m(HNO3)∶m(石墨)=3∶1∶1,m(石墨)∶m(高锰酸钾)=1.00∶0.15,膨化温度为900℃;与单酸法相比,混酸法制备的膨胀石墨膨胀效果明显,吸附性能好,产物结构较规整。 展开更多
关键词 单酸法 混酸法 膨胀石墨 稀土钆膨胀石墨层间化合物
下载PDF
Microstructure and properties of high silicon aluminum alloy with 2% Fe prepared by rheo-casting 被引量:6
3
作者 钟鼓 吴树森 +2 位作者 安萍 毛有武 李世钊 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第9期1603-1607,共5页
The morphology changes of both Fe-containing intermetallic compounds and the primary Si phase of Al-20Si-2Fe- 2Cu-0.4Mg-1.0Ni-0.5Mn (mass fraction, %) alloy produced by semi-solid rheo-diecasting were studied. The s... The morphology changes of both Fe-containing intermetallic compounds and the primary Si phase of Al-20Si-2Fe- 2Cu-0.4Mg-1.0Ni-0.5Mn (mass fraction, %) alloy produced by semi-solid rheo-diecasting were studied. The semi-solid slurry of high silicon aluminum alloy was prepared by direct ultrasonic vibration (DUV) which was imposed on the alloy near the liquidus temperature for about 2 rain. Then, standard test samples of 6.4 mm in diameter were formed by semi-solid rheo-diecasting. The results show that the DUV treatment suppresses the formation of needle-like ,β-Al5(Fe,Mn)Si phase, and the Fe-containing intermetallic compounds exist in the form of fine Al4(Fe, Mn)Si2 particles. Additionally, the primary Si grows up as fine and round particles with uniform distribution in α(Al) matrix of this alloy under DUV treatment. The tensile strengths of the samples at the room temperature and 573 K are 230 MPa and 145 MPa, respectively. The coefficient of thermal expansion (CTE) between 25 ℃ and 300 ℃ is 16.052 8×10^-6 ℃^-1, and the wear rate is 1.55%. The hardness of this alloy with 2% Fe reaches HB146.3. It is discovered that modified morphology and uniform distribution of the Fe-containing intermetallic compounds and the primary Si phase are the main reasons for reducing the CTE and increasing the wear resistance of this alloy. 展开更多
关键词 high silicon aluminum alloy ultrasonic vibration rheo-casting rnicrostructure mechanical properties
下载PDF
Facile interconversions of topology and aromaticity of expanded porphyrin in solution
4
作者 LIU ZeYu MA Jing 《Science China Chemistry》 SCIE EI CAS 2014年第10期1369-1374,共6页
The dynamic transformations of conformations and aromatic properties of [32]octaphyrins(1.0.1.0.1.0.1.0) through rotating the pyrrolic ring of the macrocycles are demonstrated by theoretical simulations in CH2Cl2 so... The dynamic transformations of conformations and aromatic properties of [32]octaphyrins(1.0.1.0.1.0.1.0) through rotating the pyrrolic ring of the macrocycles are demonstrated by theoretical simulations in CH2Cl2 solution. Facile multistep isomeriza- tions involving antiaromatic-Htickel and aromatic-Mobius topologies were also predicted by density functional theory (DFT). The understanding of changes in topologies and aromaticities of free-base expanded porphrins may provide useful information to build new macrocycles with unique properties. 展开更多
关键词 theoretical investigation expanded porphyrin conformational interconversion AROMATICITY
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部