A multi-channel free space optical interconnection component, fiber optic rotary joint, was designed using a Dove prism. When the Dove prism is rotated an angle of at around the longitudinal axis, the image rotates an...A multi-channel free space optical interconnection component, fiber optic rotary joint, was designed using a Dove prism. When the Dove prism is rotated an angle of at around the longitudinal axis, the image rotates an angle of 2 at. The optical interconnection component consists of the signal transmission system, Dove prim and driving mechanism. The planetary gears are used to achieve the speed ratio of 2：l between the total optical interconnection component and the Dove prism. The Clenses are employed to couple different optical signals in the signal transmission system. The coupling loss between the receiving fiber of stationary part and the transmitting fiber of rotary part is measured.展开更多
Effects of insertion of tandem wire coil elements used as turbulator on heat transfer and turbulent flow friction characteristics in a uniform heat-flux square duct are experimentally investigated in this work. The ex...Effects of insertion of tandem wire coil elements used as turbulator on heat transfer and turbulent flow friction characteristics in a uniform heat-flux square duct are experimentally investigated in this work. The experiment is conducted for turbulent flow with the Reynolds number from 4000 to 25000. The wire coil element is inserted into the duct with a view to generating a swirl flow that assists to wash up the flow trapped in the duct corners and then increase the heat transfer rate of the test duct. Apart from the full-length coil, 1D and 2D length coil elements placed in tandem inside the duct with various free-space lengths are introduced to reduce the friction loss. The results obtained from these wire coil element inserts are also compared with those from the smooth duct. The experimental results reveal that the use of wire coil inserts for the full-length coil, 1D and 2D coil elements with a short free-space length leads to a considerable increase in heat transfer and friction loss over the smooth duct with no insert. The full-length wire coil provides higher heat transfer and friction factor than the tandem wire coil elements under the same operating conditions. Also, performance evaluation criteria to assess the real benefits in using the wire coil insert into the square duct are determined.展开更多
The paper is focused on computer simulation of natural vegetation propagation across two selected disturbed sites. Two sites located in the different environments, the abandoned sedimentation basin of a former pyrite ...The paper is focused on computer simulation of natural vegetation propagation across two selected disturbed sites. Two sites located in the different environments, the abandoned sedimentation basin of a former pyrite ore mine and the ash deposits of a power station, were selected to illustrate the proposed spatio-temporal model. Aerial images assisted in identifying and monitoring the progress in the propagation of vegetation. Analysis of the aerial images was based on varying vegetation coverage explored by classification algorithms. A new approach is proposed entailing coupling of a local dynamic model and a spatial model for vegetation propagation. The local dynamic model describes vegetation growth using a logistic growth approach based on delayed variables. Vegetation propagation is described by rules related to seed and its dispersal phenomena on a local scale and on the scale of outlying spreading. The disturbed sites are divided into a grid of microsites. Each microsite is represented by a 5 m x 5 m square. A state variable in each microsite indicates the relative vegetation density on a scale from 0 （no vegetation） to 1 （long-term maximum of vegetation density）. Growth, local vegetation propagation and the effects of outlying vegetation propagation in each cell are described by an ordinary differential equation with delayed state variables. The grid of cells forms a set of ordinary differential equations. The abandoned sedimentation basin and the ash deposits are represented by grids of 185 x 345 and 212 x 266 cells, respectively. A few case-oriented studies are provided to show various predictions of vegetation propagation across two selected disturbed sites. The first case study simulates vegetation growing without spatial propagations and delayed variables in the spatio-temporal model. The second and the third case studies extend the previous study by including local and outlying vegetation propagation, respectively. The fourth case study explores delayed impacts in the logistic growth term and the delayed outcome by vegetation propagation across the disturbed space. The performed case-oriented studies confirm the applicability of the proposed spatio-temporal model to predict vegetation propagation in short-term successions and to estimate approximate vegetation changes in long-term development. As a result, it can be concluded that remotely sensed data are a valuable source of information for estimates of model parameters and provide an effective method for monitoring the progress of vegetation propagation across the selected sites, spaces disturbed by human activities.展开更多
Concrete is a material which is in wide use in engineering especially in construction engineering and road infrastructure facilities. Development trends for high rise constructions, modern skyscrapers indicate that bu...Concrete is a material which is in wide use in engineering especially in construction engineering and road infrastructure facilities. Development trends for high rise constructions, modern skyscrapers indicate that building such constructions with normal concretes and low consistency is impossible, therefore there is a need for concrete with high processes because of great amount of reinforcement in cross-section of concrete elements. Solution for such construction is self-compacting concrete because of its ability to fill good formworks without compaction and vibration. Considering this fact, researches for cracks, mechanical characteristics of concrete and deformations have been conducted worldwide. In this paper, we conducted an experimental research to determine the cracks on beams of self-compacting concrete and compared it with conventional concrete. The experimentally-obtained results will be presented for both types of concrete for： module of elasticity, compression strength, crack with and cracks spacing for duration failure testing time t = 400 days.展开更多
Most evaluation of the consistency of multisensor images have focused on Normalized Difference Vegetation Index （NDVI） products for natural landscapes, often neglecting less vegetated urban landscapes. This gap has ...Most evaluation of the consistency of multisensor images have focused on Normalized Difference Vegetation Index （NDVI） products for natural landscapes, often neglecting less vegetated urban landscapes. This gap has been filled through quantifying and evaluating spatial heterogeneity of urban and natural landscapes from QuickBird, Satellite pour l＇observation de la Terre （SPOT）, Ad- vanced Spacebome Thermal Emission and Reflection Radiometer （ASTER） and Landsat Thematic Mapper （TM） images with variogram analysis. Instead of a logarithmic relationship with pixel size observed in the corresponding aggregated images, the spatial variability decayed and the spatial structures decomposed more slowly and complexly with spatial resolution for real multisensor im- ages. As the spatial resolution increased, the proportion of spatial variability of the smaller spatial structure decreased quickly and only a larger spatial structure was observed at very coarse scales. Compared with visible band, greater spatial variability was observed in near infrared band for both densely and less densely vegetated landscapes. The influence of image size on spatial heterogeneity was highly dependent on whether the empirical sernivariogram reached its sill within the original image size. When the empirical semivariogram did not reach its sill at the original observation scale, spatial variability and mean characteristic length scale would increase with image size; otherwise they might decrease. This study could provide new insights into the knowledge of spatial heterogeneity in real multisen- sor images with consideration of their nominal spatial resolution, image size and spectral bands.展开更多
Supervisory Control and Data Acquisition （SCADA） is used broadly to portray control and management solutions in a wide range of industries. SCADA system failure may lead to disastrous consequences since the health a...Supervisory Control and Data Acquisition （SCADA） is used broadly to portray control and management solutions in a wide range of industries. SCADA system failure may lead to disastrous consequences since the health and the safety of the public as the economic viability of the community it serves depends on it. After its introduction in DPDC over a decade ago, the SCADA system hardly had any performance upgradation. Currently, the microwave link in SCADA Communication is observing problems that are rendering the entire structure obsolete. This paper revises the possibility to implement a new communication technology and proposes Free Space Optical （FSO） communication to enhance SCADA system reliability. FSO refers to the transmission of modulated visible or infrared （IR） beams through the air to obtain optical communication. Like optical fiber, FSO also uses lasers to transmit data, but instead of enclosing the data stream in a glass fiber, the data is transmitted through the air. It is a secure, cost-effective alternative to other wireless connectivity options.展开更多
基金the National Natural Science Foundation of China (No. 60577013)program for New Century Talents in University,Ministry of Education of China
文摘A multi-channel free space optical interconnection component, fiber optic rotary joint, was designed using a Dove prism. When the Dove prism is rotated an angle of at around the longitudinal axis, the image rotates an angle of 2 at. The optical interconnection component consists of the signal transmission system, Dove prim and driving mechanism. The planetary gears are used to achieve the speed ratio of 2：l between the total optical interconnection component and the Dove prism. The Clenses are employed to couple different optical signals in the signal transmission system. The coupling loss between the receiving fiber of stationary part and the transmitting fiber of rotary part is measured.
文摘Effects of insertion of tandem wire coil elements used as turbulator on heat transfer and turbulent flow friction characteristics in a uniform heat-flux square duct are experimentally investigated in this work. The experiment is conducted for turbulent flow with the Reynolds number from 4000 to 25000. The wire coil element is inserted into the duct with a view to generating a swirl flow that assists to wash up the flow trapped in the duct corners and then increase the heat transfer rate of the test duct. Apart from the full-length coil, 1D and 2D length coil elements placed in tandem inside the duct with various free-space lengths are introduced to reduce the friction loss. The results obtained from these wire coil element inserts are also compared with those from the smooth duct. The experimental results reveal that the use of wire coil inserts for the full-length coil, 1D and 2D coil elements with a short free-space length leads to a considerable increase in heat transfer and friction loss over the smooth duct with no insert. The full-length wire coil provides higher heat transfer and friction factor than the tandem wire coil elements under the same operating conditions. Also, performance evaluation criteria to assess the real benefits in using the wire coil insert into the square duct are determined.
文摘The paper is focused on computer simulation of natural vegetation propagation across two selected disturbed sites. Two sites located in the different environments, the abandoned sedimentation basin of a former pyrite ore mine and the ash deposits of a power station, were selected to illustrate the proposed spatio-temporal model. Aerial images assisted in identifying and monitoring the progress in the propagation of vegetation. Analysis of the aerial images was based on varying vegetation coverage explored by classification algorithms. A new approach is proposed entailing coupling of a local dynamic model and a spatial model for vegetation propagation. The local dynamic model describes vegetation growth using a logistic growth approach based on delayed variables. Vegetation propagation is described by rules related to seed and its dispersal phenomena on a local scale and on the scale of outlying spreading. The disturbed sites are divided into a grid of microsites. Each microsite is represented by a 5 m x 5 m square. A state variable in each microsite indicates the relative vegetation density on a scale from 0 （no vegetation） to 1 （long-term maximum of vegetation density）. Growth, local vegetation propagation and the effects of outlying vegetation propagation in each cell are described by an ordinary differential equation with delayed state variables. The grid of cells forms a set of ordinary differential equations. The abandoned sedimentation basin and the ash deposits are represented by grids of 185 x 345 and 212 x 266 cells, respectively. A few case-oriented studies are provided to show various predictions of vegetation propagation across two selected disturbed sites. The first case study simulates vegetation growing without spatial propagations and delayed variables in the spatio-temporal model. The second and the third case studies extend the previous study by including local and outlying vegetation propagation, respectively. The fourth case study explores delayed impacts in the logistic growth term and the delayed outcome by vegetation propagation across the disturbed space. The performed case-oriented studies confirm the applicability of the proposed spatio-temporal model to predict vegetation propagation in short-term successions and to estimate approximate vegetation changes in long-term development. As a result, it can be concluded that remotely sensed data are a valuable source of information for estimates of model parameters and provide an effective method for monitoring the progress of vegetation propagation across the selected sites, spaces disturbed by human activities.
文摘Concrete is a material which is in wide use in engineering especially in construction engineering and road infrastructure facilities. Development trends for high rise constructions, modern skyscrapers indicate that building such constructions with normal concretes and low consistency is impossible, therefore there is a need for concrete with high processes because of great amount of reinforcement in cross-section of concrete elements. Solution for such construction is self-compacting concrete because of its ability to fill good formworks without compaction and vibration. Considering this fact, researches for cracks, mechanical characteristics of concrete and deformations have been conducted worldwide. In this paper, we conducted an experimental research to determine the cracks on beams of self-compacting concrete and compared it with conventional concrete. The experimentally-obtained results will be presented for both types of concrete for： module of elasticity, compression strength, crack with and cracks spacing for duration failure testing time t = 400 days.
基金Under the auspices of National Natural Science Foundation of China(No.41071267,41001254)Natural Science Foundation of Fujian Province(No.2012I0005,2012J01167)
文摘Most evaluation of the consistency of multisensor images have focused on Normalized Difference Vegetation Index （NDVI） products for natural landscapes, often neglecting less vegetated urban landscapes. This gap has been filled through quantifying and evaluating spatial heterogeneity of urban and natural landscapes from QuickBird, Satellite pour l＇observation de la Terre （SPOT）, Ad- vanced Spacebome Thermal Emission and Reflection Radiometer （ASTER） and Landsat Thematic Mapper （TM） images with variogram analysis. Instead of a logarithmic relationship with pixel size observed in the corresponding aggregated images, the spatial variability decayed and the spatial structures decomposed more slowly and complexly with spatial resolution for real multisensor im- ages. As the spatial resolution increased, the proportion of spatial variability of the smaller spatial structure decreased quickly and only a larger spatial structure was observed at very coarse scales. Compared with visible band, greater spatial variability was observed in near infrared band for both densely and less densely vegetated landscapes. The influence of image size on spatial heterogeneity was highly dependent on whether the empirical sernivariogram reached its sill within the original image size. When the empirical semivariogram did not reach its sill at the original observation scale, spatial variability and mean characteristic length scale would increase with image size; otherwise they might decrease. This study could provide new insights into the knowledge of spatial heterogeneity in real multisen- sor images with consideration of their nominal spatial resolution, image size and spectral bands.
文摘Supervisory Control and Data Acquisition （SCADA） is used broadly to portray control and management solutions in a wide range of industries. SCADA system failure may lead to disastrous consequences since the health and the safety of the public as the economic viability of the community it serves depends on it. After its introduction in DPDC over a decade ago, the SCADA system hardly had any performance upgradation. Currently, the microwave link in SCADA Communication is observing problems that are rendering the entire structure obsolete. This paper revises the possibility to implement a new communication technology and proposes Free Space Optical （FSO） communication to enhance SCADA system reliability. FSO refers to the transmission of modulated visible or infrared （IR） beams through the air to obtain optical communication. Like optical fiber, FSO also uses lasers to transmit data, but instead of enclosing the data stream in a glass fiber, the data is transmitted through the air. It is a secure, cost-effective alternative to other wireless connectivity options.
